DIY Pringles Can Party Favor with Dome - Assembly Tutorial

[@lilbitvaught6333]

I just want to say thank you. I do not have a circuit and love to do arts and crafts. This video helps alot and explains everything easily

[@TheUselessCrafter]

I'm so glad!

[@janetjackson1042]

Thank you so much for such a fabulous tutorial! You are so clever!

[@TheUselessCrafter]

Glad it was helpful!

[@janinemaxwell4297]

I have been looking for something to make for my grandson to gift them money for Christmas and I think these will be perfect

[@TheUselessCrafter]

Yes! Such a great idea!

[@sharonabrom2352]

Great Instructions! 💕 Thanks for Sharing This. Can't wait to make it. 🎉

[@TheUselessCrafter]

Have fun!

[@laseandamadison5997]

I love this. How do you create the name or center piece in the done?

[@laniellebing8808]

Hi what would be the size of the images that’s inside the dome ? Like height wise ?

[@queenwanda9565]

Very nice!!! What size do I print to make it fit on the Pringle can so perfect?

[@noddybey1070]

if you look up pringles sizes they walk u through all sizes pringles and water bottles

[@tazzytyoung19771]

I purchased the file. Very detailed and easier than most I seen

[@TheUselessCrafter]

Great to hear! Thank you for your purchase!

[@kimwilliams2227]

@@TheUselessCrafter

[@blankao6426]

You ABSOLUTELY HAVE to make teacher coasters they are so cool

[@TheUselessCrafter]

Good idea!

[@shantellekeola9672]

Do you use both halves of the ornament? Or does it only work with one of the sides?

[@TheUselessCrafter]

For these you use half of an ornament on each one.

[@vianneygarcia5487]

Do you do your 3 inch circles with your cricut or do you use a 3 inch whole punch?

[@TheUselessCrafter]

I cut all the pieces with my Cricut.

[@TheAsiankittie]

Thank you I enjoyed you really explaining your trial and error and explaining your end result

[@TheUselessCrafter]

Haha. Better that I make the mistake so you guys don't LOL.

[@emilypreciado5396]

Amazing tutorial. Thank you!

[@TheUselessCrafter]

You're very welcome!

[@jessiN-un6de]

Where did you find the hello kitty cardstock I've been looking everywhere

[@TheUselessCrafter]

Hmm....I'm not sure. This was a long time ago...

[@Shakeitupcreationsmia]

An btw the dollar tree has AMAZING double sided tape. I have been using it and it is very sticky and hard to take off. So i think it works really well if you want to give it a shot. :0)

[@TheUselessCrafter]

Maybe I got a bad batch. They were so bad for me!!!! Like literally useless 🤣😂🤦🏻‍♀️

[@Shakeitupcreationsmia]

@@TheUselessCrafter omg no. Mine was so sticky it wasn’t funny. That’s what I used on the large pokeball I showed you. 👍🏼👍🏼

[@tymeishajordan7316]

Great tutorial !! thank you!

[@TheUselessCrafter]

Glad you enjoyed it!

[@Shakeitupcreationsmia]

These are precious!!!

[@lilyannagastelum2428]

Hi! I’m loving your videos. By any chance do you have a video That shows how to make the names to go inside the dome? I have been trying with Cricut design space and am having no luck and would love to see a video! Thanks again

[@TheUselessCrafter]

Hi! Try this one - kzbin.info/www/bejne/nYTRdWeraJaAfM0

[@yolandanavarro2219]

Me encantó ver este video, gracias por compartir

[@letycortez2912]

Are the dome size 3” clear ornaments

[@TheUselessCrafter]

Yes! It's perfect for the pringles can. =)

[@madebymidnite]

Thanks so much for this video. I've watched this as well as many other tutorials and the issue i have is the hot glue oozing out the sides of the dome creating a lumpy mess. No matter how small of an amount I use. This also makes it harder for the band to go around. In short my lids look a mess around the edges. Any suggestions. Everyone makes it look sooo easy in the videos

[@TheUselessCrafter]

What glue gun are you using? I love my Surebonder because it has a small precision tip which helps decrease mess...

[@bevita1322]

Thank you sooo much! GREAT VIDEO

[@TheUselessCrafter]

Yay!!!! So glad it was helpful =)

[@aqilahali2024]

yey thank you for sharing and teaching 🥰

[@dianneguerra6916]

Hello. Thank you for this awesome video. Can you please share where you bought your hot glue gun?

[@TheUselessCrafter]

Its a Surebonder....my favorite! You can find it in my amazon shop: www.amazon.com/shop/theuselesscrafter

[@gabbyleal8657]

So cute and unique!

[@TheUselessCrafter]

...and fun to make! :)

[@leahsierra5134]

Great tutorial! Thank you! I’m hoping to make some of these for my son’s 2nd birthday. :) Do you happen to have the measurements of the two strips you put on the top and bottom?

[@TheUselessCrafter]

Hi there! I have an SVG pack that has all of the pieces premeasured. You can find it here: bit.ly/3vGIGEQ

[@babygirl655]

Wow!!! I love these!!!

[@GlendaGilliamBlogspot]

Awesome tutorial. Thanks for sharing your knowledge and experience! The tips were very useful.

[@TheUselessCrafter]

Glad it was helpful!

[@lseh]

I wish I saw your bounce sheet trick last night. I didn’t even think of that. I could have saved myself a huge fight with my snow balls lmao

[@TheUselessCrafter]

Hahaha! Yes, it is a good trick. 🙂

[@cheriajames5330]

What is the clear dome made of and where do you order those from? Thanks

[@TheUselessCrafter]

It is half of an ornament bauble. You can find a link to them in the video description. :)

[@stacyn8075]

what sticker paper did you use?

[@TheUselessCrafter]

Hi there! I use Neato Labels sticker paper: www.neatolabels.com/?rfsn=5166150.8bcc54 Use code FANS25 for 25% off!

[@crafts_dme]

Thank you An for these great videos 😊

[@angelaakasassytudescreatio8942]

omg can someone tell me how are you guys getting the latch off the dome

[@TheUselessCrafter]

I just cut it off with a regular pair of scissors (you mean the little hole part?).

[@afmu1987]

Hermosos

[@TheUselessCrafter]

Thank you!

[@chaikiz9840]

Thank you for sharing! I will definitely give this a try.

[@TheUselessCrafter]

I'm glad it was helpful!

[@cynthiajoy6304]

Thank You bomb❤️❤️

[@crystaly1009]

How do you do this with print to cut, with the size limitations for print to cut in DS? 9.25 isn’t big enough.

[@TheUselessCrafter]

Since it's just a rectangle and easy to cut, I would recommend designing in Canva or a similar app and just print straight from there.

[@Paperinparadise]

Could you do a shaker gable box? Would love to see video of that. Thanks in advance

[@TheUselessCrafter]

I will add it to the request list. I've seen these and they are soooooo cute!

[@shaneecole9755]

You are amazing!!! 💕💕💕

[@TheUselessCrafter]

hahaha. I wish. =)

[@designsbyangelica]

They turned out so pretty, thanks for the tutorial. Where so you buy the pringles I haven't seen the small sized containers at the stores?

[@TheUselessCrafter]

Just at my usual grocery store. Target has them too: bit.ly/2ZmZSDn

[@thalitamartins1078]

Você me salvou. Obrigada. Ótimo vídeo.

[@TheUselessCrafter]

Fico feliz em ajudar!

[@tammysannicolas8508]

I love your videos

[@tazzytyoung19771]

Can you do a tutorial for the cotton candy in plastic container

[@TheUselessCrafter]

Hi there! I have this one: kzbin.info/www/bejne/o6e2oYKeibKDo5I

[@YourTreasuredTravels]

Hi where did you find the dome

[@TheUselessCrafter]

Amazon. There is a link to it in the video description. :)

[@JCDCreations7701]

Super cute! Do you have a template for silhouette

[@TheUselessCrafter]

I have a silhouette that I'm trying to learn. LOL. But once I do, I'll be doing videos in both Cricut's Design Space and the Silhouette's platform. Soon.... lol... it's on my list to do!!! =)

[@shashaadams1143]

Thank you, thank you ❤❤❤❤..

[@tabithahoward9627]

Where you buy your dome?

[@TheUselessCrafter]

Amazon - You can find the link to the ones I used in the video description.

[@evamalone600]

Hi, do you take orders to make these?!

[@TheUselessCrafter]

You can learn about my custom orders on my website: www.theuselesscrafter.com/custom-orders

[@Shakeitupcreationsmia]

Hi. Do you have any suggestions aside from using pringles cans. I’m worried that all that hard work will end up in the garbage once they have eaten all the chips. Is there another can or cylinder that you might recommend in its place? 😘🥰👍🏼

[@TheUselessCrafter]

Totally!!!! Not to mention if you save it, even with the lid on, I can still smell pringles. LOL.

[@Shakeitupcreationsmia]

@@TheUselessCrafter lololol

[@kaea1894]

Where can you get domes from please and what size?

[@TheUselessCrafter]

Hi Kaea! There is a link to the exact ones I used in the video description. Hope that helps!

[@claudiamatthews8218]

Where do u get the dome from?

[@mvillaneda28]

you can get them on amazon, they're ornament halfs.

[@TheUselessCrafter]

These are the ones I use: amzn.to/3J46t8h

[@glamomnboyz577]

I’m trying to do this for my babies birthday what sticker you used ?

[@TheUselessCrafter]

I made stickers using images in Canva and then printed them on Neato labels (link in video description). I hope that helps!

[@glamomnboyz577]

@@TheUselessCrafter yes thanks and the dome?

[@rsbobeenie]

@@TheUselessCrafter what did you use to cut the labels. Do you have a Cricut?

[@petakucas7389]

Where do you get the domes from pls

[@TheUselessCrafter]

Hi Peta! These are the ones I use: amzn.to/3zntIEC

[@shaundaemorris3303]

What did you use for tge band?

[@TheUselessCrafter]

Just cardstock :)

[@tjoeluv2move]

love it

[@TheUselessCrafter]

Thank you! 🙂

[@kroro18]

Hi! How do I find it in design space?

[@kitchenangel2455]

Ok so I’ve seen crafters with these and amazingly they would have a figurine in the dome spinning around could you please tell me how could I get that device that does such please Thank you I love you😘😘😘😘😘God sent me😘

[@jrc9]

I think they use empty Pringle cans I don’t think they would be able to have the mechanism fit under it.

[@TheUselessCrafter]

Totally agree ... it has to be empty. LOL. I did just buy the parts to try this .... so stay tuned.

[@jrc9]

@@TheUselessCrafter it’s so much fun, I tried it and loved it. It really brings it to the next level. Have fun can’t wait to see what you do.

[@matielicruz5815]

Do you have a video of how to print and cut that size from cricut?, cause It allowed me to print one can per page and is a waste of sticker paper.

[@TheUselessCrafter]

You should have been able to cut 2. Did you have 2 copies set to print?

[@mariadominguez927]

What do you use as dome top

[@TheUselessCrafter]

I use half of an ornament bauble. Here are the ones I used: amzn.to/3zntIEC

[@monaytoliver5018]

@@TheUselessCrafter which size did you use ?

[@yvetteduran2582]

Where on design space can I find the sizes for all of this ?

[@TheUselessCrafter]

Hi Yvette! You can purchase and download my Pringles Can Template SVG here: www.theuselesscrafter.com/the-useless-crafter-shop/p/pringles-can-party-favor-template-svg-pack

[@shamilporter4862]

Hi what size is the dome? I click on the link to purchase but they are out of stock.

[@TheUselessCrafter]

Hi! Here is an updated link: amzn.to/3iecQJN

[@shamilporter4862]

Thank you

[@flvrral627]

Cool

[@TheUselessCrafter]

😊

[@shamiraruff3723]

Can you let me the name of the items you ordered I wanna do this selfie my daughter first birthday party

[@TheUselessCrafter]

Hi Shamira! The supply list is in the video description. Let me know if there is anything not listed that you are looking for!

[@shamiraruff3723]

Ok I’m going to look again

[@shamiraruff3723]

@@TheUselessCrafter im sorry to bother you again but i dont see it

[@JSmith-hn5ki]

SUPER CUTE

[@TheUselessCrafter]

Thank you and thanks for watching! 😊

[@brendanallely506]

Hi what paper is it that your using ?

[@TheUselessCrafter]

Hi! Just open stock 12x12 printed paper from Michaels! 💟

[@celina3349]

What size are the ornaments?

[@TheUselessCrafter]

80mm. There is a link to the ones I used int the video description.

[@rosaperalta4571]

What size pringles do you use?

[@TheUselessCrafter]

1.4 oz cans (they're super small) =)

[@gemagutierrez5995]

@@TheUselessCrafter Does the 1.3 oz and 1.4 oz make a difference to use? Have you tried both?

[@shalandadavis2770]

How did you make the name?

[@TheUselessCrafter]

You can make a name with any font, then an offset. With the offset, weld a little rectangle to it so that it can be bent and glued down to the inside of the dome. Let me know if that makes sense or not and I will do a tutorial that includes that portion =)

[@bushfam11]

@@TheUselessCrafter are you able to do a tutorial on the name pls?

[@LuisRivera-bf7nl]

what is the sticker paper called?

[@TheUselessCrafter]

Its Neato Labels (link in video description).

[@aqilahali2024]

can someone tell me how to remove static from the dome plastic?

[@TheUselessCrafter]

YES! Bounce dryer sheets - it's like magic. LOL.

[@TheMeanOneIsGrumpy]

What was your measurements for the Sticker paper?

[@TheUselessCrafter]

You can find all the info here - instagram.com/p/CLnAYlnBzVI/?

[@monaytoliver5018]

Link for domes

[@TheUselessCrafter]

in the video description. :)

[@HeatherHunterJ]

I follow you on IG now I will subscribe over here too 🙋‍♀️ these are ridiculously cute! You are very talented

[@TheUselessCrafter]

Thanks so much 😊

[@melodystephens600]

Amazing! I plan on making these, but how much would you charge a customer for these?

[@teeross2626]

2.50 each maybe

[@TheUselessCrafter]

Thanks for chiming in!!!! I am so not ready to offer them for sale yet so I didn’t even price it yet. Let me look at my supplies and see what I come up with.

[@jrc9]

@@teeross26262.50 is way too little for something like this.

[@teeross2626]

@@jrc9 how much would you charge.i seen ppl charge about 40 for 2 set of favors of 12 so $40 for 12

[@jrc9]

@@teeross2626 The pringles itself cost 1$ plus the globes on top $10 for 24 that’s like 1.50 already plus the card stock and ink used. I’d say like $4+ around there

[@lavendiaglenn6635]

Where do you get the Downs from?

[@TheUselessCrafter]

The Downs?

[@JayRochelle]

How do you create the labels

[@TheUselessCrafter]

Hi Jenee! Which labels do you mean?

[@aqilahali2024]

never i google whats a foam sheets hehe

[@TheUselessCrafter]

Foam Stickers ... they give a lot of depth/height to your piece so it doesn't lay flat. They're awesome. =)

[@katewelsh1285]

The don't come with lids here anymore!!!!

[@TheUselessCrafter]

What!!!! I need to go check out my Smart and Final!!!

[@katewelsh1285]

@@TheUselessCrafter where I am in Australia they are on a big plastics ban

[@ransuri315]

I appreciate your content and the way you teach, but in my humble opinion like a viewer I believe you put way too many ads ( I know I can skip ) and this may prevent your channel from growing.

[@TheUselessCrafter]

Thanks for the feedback 💜💜

[@torim.8577]

Where can I find the gloss sticker paper?

[@TheUselessCrafter]

From Neato Labels! The best! bit.ly/3modu6S

[@torim.8577]

Thank you. Which size did you use?