DIY Rogue Monster Rack

[@TheGuyThatWondersWhy]

Impressive work. This is how Rogue was created. A dude in his garage with his tools.

[@skuzzn815]

Amazing Project. Building a similar rack myself and loved to see your approach on the j-cups.

[@lehigarcia3464]

Dream project. I've wanted to make a rack since high school. Seems u can make any structure after a build like that. I'd be proud of my craftsmanship and ready for bigger things. Wish I had more metal experience

[@erikgarduno5756]

I'm about to build one cause buying one is just to expensive for an 18 year old thanks man!

[@sking379]

Amazing

[@bagzhan_agai]

Thanks for the video

[@bluegorillacookies]

I LIVE IN AMERICA, WHERE IT IS VERY EXPENSIVE TO ORDER A ROGUE ANYTHING :)

[@puneet007786]

Great work brother

[@ProjectFreedomFX]

Hi, Thru how many bits did you go with your table drill? Busy building my own.. Thanks

[@amittajane3998]

Kindly Share Drawings of each parts of Rack. So it can be esay to us for fabricating, Thanks

[@trunghau7952]

Awsome

[@Mas1o8]

wow fantastic job man, if u could please share the measurements, gauge of the steel or a drawing or a plan for it.

[@SkylerKingTW]

The tubing is all 3" x 3" square tube with a wall thickness of 4mm. The plate steel that I used was all 6mm. The hardware was all 1" (25mm).

[@tienvdoan]

How much is total cost of materials? Solid work brother

[@curtwurk]

If, I'm following right, you did 50mm/ 1.96" spacing on the uprights front and rear face. What hole spacing did you do on the sides starting from the bottom? Thanks! Great work!

[@deseremere]

Cool thing, respect. With that it is like two weeks of hard labor plus materials (and equipment if not have it) to make it. Easier to buy for $1500+

[@MrKevinjones41]

Good build build m8 i am going to build similar just your thoughts if you don't mind . i was thinking using mild steel hollow square tubing 40 x 40 2mm wall .not quite sure of integrity swl of weights for the rig any ideas

[@ignacioortiz7847]

Nice build! Did you use flux core or mig welding. You think a titanium 125 welder from harbor freight will do this job? Or do I need a better welder?

[@jesuscampie4099]

Honestly it would be good enough

[@JoeOracoy]

Love your build. Can you share the diagram and dimensions/sizes of this awesome MonsterRack? Like how many tubular steel you buy and the size etc...

[@SkylerKingTW]

This really wasn't meant to be a "how to" or instructional video, so I never bothered to write up all the detailed info for the purpose of sharing. I can tell you that the dimensions of the rack are available on Rogue's website (which is what I used for reference).

[@seofilipino]

@@SkylerKingTW That's alright. Still love your vid tho. Thanks

[@edgareduardio5586]

hello, how long is the pole? and what caliber is it?

[@lilchurchboi3252]

How big were the holes ?

[@bradrogers3881]

Hi great job! What type of steel did you use? Like the grade?

[@acctsupsvc6454]

I wish I could do all of that, I don't know anything about welding but I'm a diy, how much would you charge or price this work?

[@geewillikers5342]

Great job, well shot and edited. I am building a wall mount rack - how did you go about lining up the holes front/back? Also, what spacing did you use?

[@SkylerKingTW]

I set up my bench vises to be centered with my mag drill, so that every hole was always in the center of the tube. I can't remember the exact spacing off the top of my head (it likely shows it in the video) but I think it was two inches.

[@aydipoorhossein50]

Well done mam 👌🏻

[@diegoverdesoto9430]

Hey dude, what is the name of the bit that you've use to make the holes? Thanks and best regards.

[@fryloc359]

looks like a slug cutter. A hole saw would probably work also.

[@danny60473]

What bit and drill press did you use to drill the holes?

[@SkylerKingTW]

I used a 1500 watt mag drill with an rpm of 360 or so. The bit used was a 26mm annular cutter.

[@TinyAntKing]

Can someone tell me where to buy some steel bars that don’t cost as much as a cheap squat rack on Amazon

[@chrisj2713]

Scrap yard

[@DFNUVS]

😳😱💪🏽🖤👌

[@ernestk3152]

it looks like 7 gauge thickness is it?

[@SkylerKingTW]

I am sure about the equivalent gauge off the top of my head (everything here is measured in millimeters) but the wall thickness of the tube is about 4mm thick.

[@eveliinatistelgren172]

How much does it cost to make in total?

[@SkylerKingTW]

About $300

[@eveliinatistelgren172]

@@SkylerKingTW Incredible! Does it have the same strength tho?

[@SomeTechGuy666]

@@eveliinatistelgren172 Yes it will. Or better.

[@isaacgalvez4174]

Any chance you have an email or social media i can pm u on I have few questions regarding the build

[@isaacgalvez4174]

Thanks