DIY Rooftop tent What happens if I put this on/完成したルーフトップテントをなんとか載せる

[@bungabening3530]

Excellent work! And thanks for taking the time to video everything and translate it to English

[@HeadwayDrive]

Thank you, English subtitles may not be appropriate, but I'm happy to share them.

[@user-Platon30.11]

Вдохновили на постройку. Простое человеческое спасибо! Удачи и прцветания каналу!

[@HeadwayDrive]

Спасибо!Мне очень нравится процесс построения идей.

[@J1I9M7M4Y]

I really like the high quality of your tent. Very elegant and clean design! Thank you for sharing sir! New subscriber!!

[@HeadwayDrive]

If you DIY, you can make a roof top tent that fits the roof of the X-Trail. However, it took me a lot of time to complete.

[@martinkuhne452]

Very nice work!! Greating from Germany

[@HeadwayDrive]

Thank you, commercial rooftop tents are also attractive, but if you make it yourself like this, you will have an ideal one.

[@107cadman107cw]

Amazing build. I am planning to do a similar build.

[@HeadwayDrive]

Please refer to the many playlists of rooftop tents

[@javiev]

muchas gracias por compartir... un abrazo desde Patagonia..

[@HeadwayDrive]

The possibilities of rooftop tents vary here. I hope this video will be helpful.

[@鹿又直矢]

製品化して良いレベルですねぇ…。 素晴らしいアイディアです、昔から動画楽しみにしております。

[@HeadwayDrive]

Thank you:) 個人で製作するとやはりコストがかかります。 事業として成り立つようにするには相当な努力と覚悟が必要。 私はそれが怖くて趣味で製作することしかできません。 なので事業を立ち上げている人を誇りに思います。

[@paulreeves5012]

That is a nice looking rig, your attention to detail is fantastic and thanks for the english subtitles. Yes some of the syntax gets lost in translation but we all understand what you mean. I can't wait to see how you re-mount the light bar. Outstanding!

[@HeadwayDrive]

Many Thanks, English subtitles are difficult, but I will display them for deeper understanding. The rooftop tent has been completed and equipped with a light bar. Camp and all lights on m.kzbin.info/www/bejne/omabcn95lJtsf68 Rooftop tent details m.kzbin.info/www/bejne/np_Wc35vbKmsq8k

[@raulpop4314]

Which type of rubber sealant did you use between the aluminum profiles? Can you post some pictures with that detail too?

[@HeadwayDrive]

No sealant is applied between the aluminum profiles. If you hold down the honeycomb panel with an L-shaped angle and tighten the bolts, water will not leak.

[@Kenjineering]

Excellent new retro wave music!

[@HeadwayDrive]

Play music and work smoothly.

[@aliherrera6522]

Greetings, excellent work, could you tell me what material the honeycomb panels are made of?

[@HeadwayDrive]

Thank you for your interest. The material of the honeycomb panel is polypropylene resin.

[@aliherrera6522]

@@HeadwayDrive thank you

[@salihkalkan6987]

What are the specifications of honeycomb panel you used ? Material that is used in panel is Aluminum or PP or any other ?

[@HeadwayDrive]

The honeycomb panel is 9.7mm PP. The edges are surrounded by aluminum L-angles and fixed with bolts. Although it is not caulked, there is no water leakage.

[@salihkalkan6987]

@@HeadwayDrive many thanks 🙏🏻

[@Roth209]

Can you post a picture of your car with the tent closed? You do fantastic work. I enjoy watching your videos.

[@HeadwayDrive]

Posting to KZbin is irregular, so please visit Instagram. You can show a picture of a closed tent.

[@Adampio777]

Hi, it's very impressive! Did you test it already on the rain? I mean fixing of lower edges of the fabric in the top frame groves.

[@HeadwayDrive]

Not used on a rainy day yet. Since the fixing position of the dough is changed to the upper part, I think it can prevent the ingress of water.

[@Adampio777]

Thanks for the answer. I am afraid only of long stay a rain water inside of the fixing groves. So please check it and advise if possible.

[@HeadwayDrive]

If you spend a rainy day, I will post a video of the situation.

[@Porroquio]

Hi there again! What is the material used for base and top? Honeycomb what?

[@HeadwayDrive]

Hi, Both are honeycomb panels 9.7 mm

[@edwinalexander1170]

When you sleep inside the roof tent in the evening is dark, why you didn't connect the light inside taking power from your auxiliary battery?

[@HeadwayDrive]

We will install a light in the tent in the future. Currently I am using a small light that can be connected via USB.

[@AlVee3050]

Nice idea, i have xtrail t31 too...two thumbs from Indonesia

[@HeadwayDrive]

Thank you, let's evolve our car to suit our hobbies and enjoy a better everyday life.

[@boteg73]

Where'd you buy the black honeycomb panel?

[@HeadwayDrive]

Although I was shopping online, I looked for it in Japan.

[@mrcawes]

Insane! Awesome work you did there. Thumbs up from Slovakia!

[@HeadwayDrive]

Thank you, the evolution of X-Trail does not stop!

[@kaspar10000]

Do you have a link for the laches that you used? Have been searching for these things for a while now, but with no luck.

[@HeadwayDrive]

The lock latch used is for fixing the seat of another vehicle. Mitsubishi part number MQ507199 Suzuki Part No. 8192079002

[@kaspar10000]

@@HeadwayDrive thank you very much

[@elburropardo1661]

Where did you buy the honeycomb panels. And what size are the one you used? I like your tent

[@HeadwayDrive]

I bought it from a Japanese company. Search for Honeycomb Panels and find a distributor in your country. The size is the same as the frame length 2060mmx1260mm

[@elburropardo1661]

@@HeadwayDrive Thanks.

[@chipsygaming9000]

Hi what honeycomb panel did you used?

[@HeadwayDrive]

Rare black honeycomb panel with a thickness of 9.7mm

[@ナカヤマサキ-z8c]

さらにカッコ良くなりましたね！ちなみに完成後、テントへのアクセスはどのようにするのでしょうか？台などを使って登る感じですか？

[@HeadwayDrive]

ハシゴはまだ購入していないので、後ろのテーブルから上がってテントに入り込んでいます。 いずれリアゲートにハシゴを付ける事になるとは思います。

[@supportsrb]

Really good RTT, I started to make mold and make it from fiberglass, but I changed the plan because of the weight of final rtt which I don't like, so I think to do it like you with aluminium profiles Bosh Rexroth . Can you please write, what are your sizes of frame? Aluminium profiles are 30x60mm? 195x127cm will be my dimensions of the frame. Great work and Thank you!

[@HeadwayDrive]

Thank you for your interest. The aluminum profile size is 30x60mm and 2000mm and 1200mm are used. This length is the inner size. Since the corner aluminum is 30 mm on one side, the outer diameter is 1260 mm x 2060 mm.

[@supportsrb]

@@HeadwayDrive Thank you for your answer. So when it's closed on 12cm height it can fit pillows, blanket and stairs? I need to know all that before order the all parts. I thought maybe to go with 30x30mm alu profile on upper panel but I'm afraid it will be to tin to feet all necessary.

[@HeadwayDrive]

@@supportsrb When 30x60mm is closed in two steps, a height of 90mm can be secured inside. I think you can store ladders and blankets as they are. Pillows may not fit depending on the height. If you use 30x30mm for the top, you should use 60mm for the bottom. It is better to secure at least 90mm of internal space.

[@Fender90]

こんにちは Your tent is beautiful! I have a couple of questions. How much does it weigh? Considering the fact that you have lifted the car, doesn't the additional weight affect the vehicle stability when driving?

[@HeadwayDrive]

こんにちは、 When installing the rooftop tent, fix it to the base carrier, etc. but that method will cause the center of gravity to rise and it will become unstable. The weight of my tent is 50kg, but the center of gravity is low because it is fixed so that it is not separated from the roof as much as possible. The vehicle will not be unstable

[@どかどか-h3w]

既製品じゃないですよね？見た目が美しいです！

[@HeadwayDrive]

フレームなどの部品調達からテントのデザイン&裁縫まで行っています。 時間はかかりますが、自分で製作するのは楽しいです。

[@tacticalant3841]

Im really interested in this design. @2:23 you said “all the pipes in the dough...”. What does this mean? Is this in reference to how the tent is attached to the slot in the aluminum extrusion?

[@HeadwayDrive]

Aluminum pipes are used to fix the tent fabric. Pass the pipe through the fabric and insert it into the groove of the aluminum frame. You can see it by watching the video of 3. m.kzbin.info/www/bejne/rJ7XpIaIdsaLqtE

[@tacticalant3841]

I see, very good. Wouldn’t it be better to insert in the top slot so water doesn’t get in? I like your L300👍

[@HeadwayDrive]

You noticed, later I put it back in the upper groove. You can see it in the completed video. m.kzbin.info/www/bejne/np_Wc35vbKmsq8k

[@Fixmesut]

Amazing job. Could you please teach the name of the bgm?

[@HeadwayDrive]

Travellers / Ran the Man Night Stalker / Wave Saver

[@kevinwyatt9771]

Its weird that Nissan UK give both static and dynamic roof load weights as the same??

[@HeadwayDrive]

Although each vehicle roof has a defined load limit, it is within the range where commercial rooftop tents can be placed. In addition, since it is designed to support with 4 basic points, it should be possible to load items exceeding 100 kg. By the way, this rooftop tent weighs 55 kg.

[@wkzu2172]

こんばんは❗️ 毎回楽しく拝見させてもらっています❗️ ボディが凄く綺麗ですね✨ 何かコーティングされてますか❓

[@HeadwayDrive]

そう言っていただけると嬉しいですが、木の枝等が当たっているので傷だらけになっています。 特にコーティングはしていません、撥水の洗車をしているくらいです。

[@moonmanzn]

Where did you get the back window vents for fresh air?

[@HeadwayDrive]

I made it myself, I have posted production videos in the past.

[@でんチャンネル-o8u]

キャッチはどこで購入してますか？なかなか同じようなものを見つからなくて、宜しければ教えてください。

[@HeadwayDrive]

使用しているロックキャッチはスズキ エブリイのフロントシートに使われています。 新品を購入しましたが、品番は覚えていません。 エブリイ フロントシートバックルと検索してみてください。

[@でんチャンネル-o8u]

Headway Drive 友達のエブリイに何回か乗ったことあるが、全然気づかなかった。ありがとうございます、参考になりました。

[@木山皓太]

コメント失礼します！ ハニカムパネルはどこで購入出来ますか？

[@HeadwayDrive]

こちらから購入できます。 www.interrajapan.shop/shopbrand/ct396/ ３枚、または5枚売りなので少し高価です。 ここはカットもしていただけます。

[@G_de_Coligny]

When did you get the Mitsu L300 ? was it before the Xtrail ?

[@HeadwayDrive]

In Japan it is named Delica Star Wagon. This has been owned by my father for 25 years.

[@G_de_Coligny]

HEADWAY-DRIVE impressive. Was trying to get one from Chubu Mitsubishi in 豊橋... To replace my D:5 DiD... But they are not helpfull...

[@HeadwayDrive]

The D5 has become a separate item, with a more luxurious atmosphere such as the body structure, interior, and exterior, and is suitable for urban areas. Older models are more off-road

[@G_de_Coligny]

HEADWAY-DRIVE yes... based on the... 2007 outlander... still for the 2020 model :-( and a number of safety recalls that would make a Russian car owner proud... The good thing is you can find spare parts on the side ditch of most japanese roads after they fell from another D:5...

[@artemsilaev7166]

very cool

[@HeadwayDrive]

Thank you:))

[@Whisk01]

How did you seal the floor panel?

[@HeadwayDrive]

The floor panel is only placed on the aluminum frame and is not sealed. The gap between the aluminum frame and the panel is within 1 mm. Since there is no need to seal with this specification, it is left as it is.

[@Whisk01]

@@HeadwayDrive Thank you for the reply! Love the channel and your build. I live in Colorado USA and have a lot of rain, dust weather and will need to seal everything.

[@HeadwayDrive]

Thank you for loving the channel. Colorado seems to have a lot of dust. The origin of my rooftop tent is the Tacoma camper from Ripcord. m.kzbin.info/www/bejne/Z5rMi31trcZjoM0 The same aluminum frame is used. It will be very helpful if your vehicle is a truck. If you want to equip an SUV like me with a shell type, the Gofast Campers rooftop tent will be helpful.

[@tomaskazokas8123]

Great Job! I'm also building the same tent. Could you post a link for the latches? also did you have to use any sealant between the roof and the panel?

[@HeadwayDrive]

You're doing a good job. The lock catch uses the SUZUKI Every front seat lock buckle. Since the top plate is held by an aluminum angle, no sealing is used.

[@tomaskazokas8123]

@@HeadwayDrive Thank you. I'm asking about the latches that you used for the tent. Yours have red release button. Where did you get these tent latches? I can't find anything like that.

[@pokonoharadokei]

テントの布の素材はコットンですか？

[@HeadwayDrive]

ナイロンゴム張り二層です。 表面はナイロンで裏に白いゴムを貼りつけてあるものです。 撥水効果があります。

[@k5m190]

昨日くらいからずっと待機してました(°∀°)✨

[@HeadwayDrive]

完璧なものは製作できませんが、自分なりに考えてここまで形にしました。 旅行が楽しみです。

[@keeganbuilds]

great video! I bet the heater that I built would work awesome with something like this! (check out my build video)

[@HeadwayDrive]

This is considered a good design. It is helpful because I am also considering installing an FF heater.