Learn how we made a custom DIY windshield for our cfmoto zforce side by side for less than $100!! off-road trail riding with more comfort. build and installation wind shield straps #amzn.to/3fiO0tE diy windshield #cfmoto
Пікірлер: 63
@tammyd40996 күн бұрын
This is a great video, exactly what I was looking for. I had seen those straps but didn't know how they worked.
@CameronsonCamera6 күн бұрын
Thank you. We are still using this today. The only thing we have done since then is added a section of rubber vacuum line to the bottom side to prevent scratches on the paint
@thelongdaysofwheeling1243 жыл бұрын
I know what my spring project is going to be now. Thanks.
@jannandavid2 жыл бұрын
Thank you so much! Great video! 👍
@Dronerangerspro3 ай бұрын
Great idea. Now you can make a folding one next. At least I bet you could!
@CameronsonCamera3 ай бұрын
We’re thinking about bed covers and upper doors also
@phoenixarizona84412 жыл бұрын
Awesome video windshield turned out great we have built a bunch of windshields for our buggies over the years we need to build some for our current buggies
@BiffSkeffington3 ай бұрын
You guys are awesome!! Thanks for a great video - I'm headed to Lowes!
@Awavy12 жыл бұрын
OMG I have the same sxs and spent like 5 bills. I will use this method for rear now though! Thanks for doing this video!
@CameronsonCamera Жыл бұрын
It’s working well for us. Thanks for watching!
@Jasoncohenour11 ай бұрын
Thanks for sharing, this will save us a few hundred bucks.
@tilleypatrickpt3 жыл бұрын
This is a very good video, good job Cameron's!
@CameronsonCamera3 жыл бұрын
Thank you!
@randykestner38707 ай бұрын
Thanks for the video!!!!
@RVWeekendsRC13 жыл бұрын
Very good job:)Very helpful video!
@CameronsonCamera3 жыл бұрын
Thanks
@wendellcrossley9 ай бұрын
Awesome job. I used your idea but when I marked out the windshield I traced the hood with a grinding disk on edge than a washer with a sharpie. But I never would have done it without this Video. Also I put Foam take between the bar and the Plexiglass to keep the vibration down .Thank you. Nova Scoita Canada
@CameronsonCamera9 ай бұрын
I’ve used that trick with a washer on flooring before, definitely a good idea. I’m glad to hear it was helpful.
@andrewellis52184 ай бұрын
Using a flat washer works also to draw contour
@tomnutt60222 жыл бұрын
"ready for adventure" ha nice video
@chinosami25393 жыл бұрын
Perfect, i want make the same, Cheers from argentina, sorry for my english..
@CameronsonCamera3 жыл бұрын
I hope it helps, thanks for watching
@doc5593 жыл бұрын
🏆🏆🏆👍🙏🙏 SUBSCRIBED Thank you for sharing
@4546ollie6 ай бұрын
That would last about 5mins with my rig. But good job for your needs
@issemxfi Жыл бұрын
Hi! Great video! Where did you get the straps???
@CameronsonCamera Жыл бұрын
Thanks! We got the straps off of Amazon .
@petropete3122 Жыл бұрын
Nice job. Where did you get those belt type mounts for the windshield?
@CameronsonCamera Жыл бұрын
Thank you! We got ours from amazon, their should be a link in the description.
@petropete3122 Жыл бұрын
@@CameronsonCamera yes see it. Thanks again.
@rickliners61233 жыл бұрын
Helpful vid. I'll be building this. Just saved 250$. Questions: How do you get the windshield from sliding down and bottom edge from rubbing and scratching the paint? I'm thinking weather stripping at bottom edge, thoughts?
@CameronsonCamera3 жыл бұрын
I ended up getting vacuum hose and cut a slit down it then slipped it around the bottom edge . I’m glad it was helpful!
@gina60832 жыл бұрын
Could use pool noodle and your choice of adhesive or put on a glue gun bead/strip on bottom to keep from touching. Just cheap ideas.
@phoenixarizona84412 жыл бұрын
Rubber Hose around the edge of the windshield works perfect
@jcmjrtile1261 Жыл бұрын
Try pipe insulation
@RocksNRuts4 Жыл бұрын
they sell rubber edging
@jamespruett31952 жыл бұрын
We. Were lazy we got one for 200made for the machine works great
@CameronsonCamera2 жыл бұрын
Nothing wrong with that, they’re a great investment
@stuckpencil250910 ай бұрын
I just made doors for 35$ with straps and clamps with see through tarp
@CameronsonCamera9 ай бұрын
Nice 👍
@zforce8007 ай бұрын
Where did you buy your contour gauge?
@CameronsonCamera7 ай бұрын
Contour Gauge Duplicator - 20... www.amazon.com/dp/B07XSJ2SWL?ref=ppx_pop_mob_ap_share. This is the one we have
@clintskidmore83942 жыл бұрын
How well does it hold up. Thank you from Ohio
@CameronsonCamera2 жыл бұрын
I can’t say that I’ve had any issues with it, if you’ve got more time than money it’s a good option. I haven’t had any flexing problems and scratches are minimal. I did take it off at the little Sahara sand dunes (if you saw that one) because it was so hot, I wanted more airflow. Thanks for watching!
@clintskidmore83942 жыл бұрын
@@CameronsonCamera thank you I definitely have more time than money! lol I ride in Ohio and West Virginia so I think it will work great.
@clintskidmore83942 жыл бұрын
@@CameronsonCamera what size thickness for the plexiglass do you know?
@CameronsonCamera2 жыл бұрын
We got ours from Lowe’s. It is 2’ x 4’ lexan 1/4” thick
@clintskidmore83942 жыл бұрын
@@CameronsonCamera thank you so much
@patogee3 жыл бұрын
Hola donde venden el medidor de contornos saludos desde Chile
@rickliners61233 жыл бұрын
En Amazon.com.
@johnnywoodmusic Жыл бұрын
En el pinche Harbor Frey
@andrewstrawn35248 ай бұрын
what thickness
@CameronsonCamera7 ай бұрын
1/4 inch
@zforce8007 ай бұрын
What size of sheet did you buy?
@CameronsonCamera7 ай бұрын
2x4x1/4
@zforce8007 ай бұрын
@@CameronsonCamera would you have a link for the windshield can't find a 2x4 sheet
@CameronsonCamera7 ай бұрын
We got ours at Lowe’s a couple years ago.
@rockyvictory90446 ай бұрын
Same issue trying to find sheet
@jamikeener74762 жыл бұрын
Can you take this off?
@CameronsonCamera2 жыл бұрын
Yes we remove and install as needed, the straps are Velcro
@jasonkirkley78382 жыл бұрын
Awesome video but your voice tho 😅
@humai7716 ай бұрын
There were 3 other videos ahead of this one and none had any information of value to this topic this chick just slapped the ego right off those worthless posters.