DIY Sliding Barn Door Console

We found AMAZING hardware for $40 and had to build something for it! Come check out this DIY Sliding Barn Door Console! We built the whole thing for around $200 in hardware and lumber!
You can find the $40 hardware here! rstyle.me/n/cub...
You can find the cute metal pull here! rstyle.me/n/cub...
Free Printable Plans: www.shanty-2-ch...
Glu-Bot - BEST glue bottle ever! Link here - rstyle.me/n/cts...
DIY Floating Shelves: bit.ly/29qZ449
DIY Thanksgiving Table: bit.ly/2dshHEn
DIY Wood Bench: bit.ly/2bYRUHV
Our Favorite Tools: bit.ly/29t0fgm
--
Facebook: / shanty2chic
Twitter: / shanty2chic
Pinterest: / shanty2chic
Instagram: / shanty2chic
Blog: www.shanty-2-ch...

[@dianelislarrinaga9380]

Yessssss! Finally! I was hoping you would do something like this. Everyone else gives such confusing instructions... thank youuuuuuu you girls are awesome

[@shanty2chic]

Yeah! We love hearing that! Thank you!!!

[@sandyantor]

You girls rock. Where can we find those baskets? Please and thank you.

[@starrfitz9284]

I would love this as a bathroom vanity! I have 54 inches long and 16 inches deep single sink in center 💕 the door hides the plumbing yet easy access and baskets hide the stuff👍

[@sandyantor]

Making this now. Your awesome. Question, where might we find the baskets?

[@mulekickhandmadeguitars8465]

Love this unique idea. Very cool. Great job.

[@MichiganWildcat]

Love the videos, outtakes are a riot! Oh and the projects are great too! 😊

[@randomdude2287]

looooooooooooveee it. i have a bar outside that is too narrow to open. this idea kills!!!. Love you ladies!!!

[@shanty2chic]

Yeah! What a fun place to put it!

[@3x3CustomTamar]

Just watched this my daughter. We loved it.

[@shanty2chic]

Awww thanks! Starting her young... Good mama!

[@3x3CustomTamar]

Shanty2Chic she loves “helping” me in the shop. It’s great for her to see other women out there doing what we do

[@Kutulu1982]

Thanks for sharing!! Great project! What time of nails did you use on trim and frames? Are they Brad nails o finish's nails? Where I can find info on the Ryobi you are using?. Thanks again

[@texasmagnoliahome5103]

“Shut the Barn Door” 🤣 Love the console table!! 😍

[@debbydhill]

I thought you were going to say... "Roll that bean footage"... too cute!

[@Kutulu1982]

Thanks for sharing¡ the since the front frame is 2inches and boards 3/4 of an inch, is it flashed to the inside or frame Just in the middle of the board?. Thanks

[@stephaniemzapata]

I’m new subscriber and I’m so obsessed with your channel I just bought my first set of power tools and I’m following your workbench plans as my first project! Then going to invest in the peg board you recommend

[@mulekickhandmadeguitars8465]

You're going to have a lot of fun, and you'll be pretty surprised at how many cool things you can build with only some basic power tools, and hand tools. Also, don't be shy about building things to sell. Woodworking is a hobby that, not only pays for itself, but can be pretty profitable. Most importantly, HAVE FUN!

[@stephaniemzapata]

This was so long ago I’ve done so many projects since and have so many tools now very addicting

[@luiscarrillo2910]

How much weight do you think it would hold?

[@mikestrickland8153]

Where did you get the baskets? They fit perfectly. Great job on the build!

[@BerryandtheBeast]

Yall are hilarious and so talented! Love this project, and loved the fun editing 💕

[@shanty2chic]

Thank you Mallory! We appreciate your kind words :-)

[@jimpowell7830]

You two Rock !!! love the projects you post, sadly up here in Canada the hardware alone is $150.......still going to make it though :)

[@InjectMusic]

Prolly a silly question but you think they are using a 18 gauge Brad nailer?

[@judiblock9102]

I've tried pulling up the plans for the barn door console but get a blank page every time. Any suggestions? BTW, since I found you ladies I cannot stop watching you....so cute, great personalities and very talented. Now I need to hire a housekeeper because all I want to do it watch you!!!

[@lukasb7450]

Wow you girls rock & roll. Fantastic job as always 👍😁😉😍🌹😘

[@shanty2chic]

Thank you Lukas!! :-)

[@zinopower4430]

When this door slides what keeps the door from swinging inward? The door would swing in and out a bit right?

[@danielasosa4331]

I could change the dimensions of this (aside from the width) and still use the same hardware right? I think I want it taller and deeper! About the same size as your locker cabinet!

[@katelynboley9232]

I was thinking of modifying this a little bit (two sliding doors instead of one) and using it in a bathroom for a double vanity. Do you think its sturdy enough for that?

[@beverlyhayes]

How difficult would it be to make this console a bit deeper? Like 18 inches deep?

[@lyndadrake2662]

Where can we find the baskets?

[@reaper22387]

So when you say a nail gun. Is that a finishing or a brad? Or do I need 2 nail guns? Lol

[@kaitlyncausland6828]

Help please! I’m building this today and wanted to see if y’all used plywood for the top too?

[@leahsines1025]

Do you think this would this support a 70" tv's weight?

[@jannasawaya9221]

😂😂😂😂😂 you ladies are hilarious!!!! What a cute piece

[@shanty2chic]

Thank you Janna! We love to laugh at ourselves, so we are happy you liked it :-)!

[@jannasawaya9221]

Shanty2Chic Do you have any tips how to put a sliding barn door on a 8 cube organizer. Thank you

[@chelsgrubb5287]

Is there an instruction video for the barn door hardware? I finished the console today and I have ABSOLUTELY NO IDEA HOW TO INSTALL THIS HARDWARE lol. HELP!! Ps. Thanks so much for the free plans :)

[@chelsgrubb5287]

@shanty2chic

[@allyranches]

Agree. @shanty2chic do you have the instructions and a video on how to install the barn door hardware? What is the distance of the bottom of the console to the bottom of the bar? Is there a gap between the bottom of the bar and the top of the door? If so, how much? How far in did you place the rhombus? How did you keep the door from swaying in and out?

[@tierrat.6506]

Do you have the link to the hanging wall lamp?

[@PhDarien]

Did Ryobi build that #shanty cooler near the fridge, or is it just perfectly matched? Nice build.

[@laurenl3618]

I️ have to ask... could you post the link to those cute lights?? I’ve looked everywhere for them and can’t seem to find them!

[@MrLouis81]

How long of flat bar did y'all use 6 ft or 6'6"

[@denifowler5401]

Where did you get the baskets? Also, we are about to build this and I read one of the comments saying the plans are wrong and the pocket holes are in the wrong place. Is this accurate? Thx!

[@sandyantor]

Deni, did you find out where baskets are from?

[@Amariah1992]

Would this hold up a tv

[@cynditoddsause9340]

Is there a link to buy that hardware?

[@shanty2chic]

Yes! I linked above, but here it is again... You can find the $40 hardware here! rstyle.me/n/cubi72xv6w

[@dmoss8928]

What paint colors did ya'll go with?

[@shanty2chic]

The console is painted with Software by Sherwin-Williams and the stain is Briarsmoke by Varathane

[@SpeedysWoodshop]

LOL!!!!! Cool project ladies:-)

[@shanty2chic]

Thank you!!!

[@jessicagalindo8951]

How much weight can this hold. Would love to put a tv on it!!!

[@shanty2chic]

It will easily support that!

[@b3arwithm3]

Build in 2h 😂 lol. I guess if we don't sand it, don't finish it, don't need panels to be squared, don't need shelves to be equally spaced, etc...yeah 2h

[@diegobasterrica6311]

there's something about those eyelashes...

[@shanty2chic]

Hahahaha

[@zinopower4430]

they are fake, but still lovely!