Sliding Door Media Console

Welcome back everybody! Super excited about this video!!!!
Recently I have started to spend more time trying to learn more about editing everything film making in general. I think I has started to make some strides towards having better quality, more entertaining videos. I am excited to see what you guy think about this one.
This video isn't necessarily woodworking tips, rather a time-lapse of a very popular sliding door media console. In it, you will see my steps from start to finish to give you an idea of how I go about making these. Very simple and fun to build, hopefully you will find it enjoyable.
If you have any questions do not hesitate to leave them in the comments section below or you can send me a DM on Instagram. So, if you aren't following me there, you can find me @bentswoodworking
As always, don't forget to LIKE, SUBSCRIBE, and SHARE!
Thanks!
Jason

[@miriamibarra1599]

You make it look sooo easy! Lol I’ve been watching a couple of these videos and I’m convinced I can try making my own!

[@bentswoodworking]

You can absolutely make your own!

[@rerod]

Great job! Nice how you tell how it's all done.

[@islandhomestead3995]

Dream shop any craftsman would love to build somethingin there, very well done project I may need to steal this design.

[@bentswoodworking]

Steal away 👍

[@pavlo0412]

Excellent job sir !!!! You make it look so easy . Love watching your videos .

[@bentswoodworking]

pavlo0412 thank you so much!

[@haveeair]

Sick! I wish I had all that equipment to work with. Good job.

[@bentswoodworking]

haveeair thank you!!

[@humbertogarcia7317]

Nice, very nice. The video is superb! Thanks

[@rdknght17]

Damn that's very professional

[@Thom4123]

Awesome job looks fantastic!!

[@bentswoodworking]

Thom spillane thank you very much!

[@djbartles7337]

Very nice work. Any chance you have a plan or any notes about the build? I just started something very similar but different dimensions and I think I like your shelf construction better.

[@bentswoodworking]

I don’t but there are some decent plans on similar ones out there.

[@rochoa9520]

Very nice!!!

[@bentswoodworking]

👍

[@andyvanderborght6921]

Hi Jason, great build!I want to build my first cabinet,based on your design.Question:is there a reason why you didn't hide the edge of the side trim behind the face frame?or just personal preference?

[@bentswoodworking]

Just didn’t account for it initially

[@geraldpaul1870]

Great build but is there any detail information you can provide for the size on cuts you made on the wood.

[@bentswoodworking]

I do not have any plans for this

[@paulscraftshop3782]

Good job nice work

[@bentswoodworking]

Thanks!!

[@warrendailey6039]

Nice work! Looks great! I was wondering if you had a ballpark materials list and overall dimensions? Looked like the frame was built with 2x3s maybe and then some 3/4 or 5/8 inch plywood around the outside with a lot of 1x4s for interior and design work? I could be way off, but I'm planning on building something similar. I'll need mine to be 60"x40"x21" Thanks for the video!!

[@bentswoodworking]

Warren Dailey you’re on the right track. The first time I made this I used plans. Search for Nikki Grandy sliding door console and you will find plans that will help you out. I have made various changes since cause I have built it many times in various sizes. I don’t have any specific plans or measurements as they always vary.

[@AngieWilliamsDesigns]

Great project. I would really like to know more about the hardware. The one thing holding me back from making one of these is the hardware is so expensive. I was able to find the roller but when I looked up the spacers on amazon... I didn't get what I was expecting. Did you just get them at a local hardware or big box store? I even googled the part number for everbilt. No luck.

[@bentswoodworking]

Angie Overton everything I use comes from HD. I actually have another video that talk only about the hardware and how to do it.

[@A.M.Independent.Consultant]

@@bentswoodworking going to look for that video now, thnx

[@lisardohuerta1656]

Good job looks really good, question what type of framing lumber did u used and also for for the top. Thanks ,keep it up.

[@bentswoodworking]

Lisardo huerta this was constructed with furniture grade pine from my local lumber supplier

[@crobles13]

i built one exactly like yours. just curious as to how you attached the top.

[@bentswoodworking]

Z clips

[@paffaman11ripcity.41]

Nice I'm gonna build myself one like yours for my game room/ movie theater for all my devices.

[@bentswoodworking]

Awesome. It’s a fun build

[@ckutzli]

New subscriber nice job on your videos. I hope you continue.

[@bentswoodworking]

Bruce thank you. Currently I release videos every two weeks. I look forward to chatting with you more in the future.

[@goemaerefabian6998]

superbe boulot

[@ericmontanez7276]

Amazing!!

[@bentswoodworking]

Thanks

[@bartgiles1068]

What keeps the door from scuffing the front of the cabinet down on the bottom? Making one similar thanks in advance

[@bentswoodworking]

Nothing really. I have seen some add a bottom rail.

[@teresagonzalez563]

Can you please tell me the items you use to make the hardware and where you buy them from. Thank you

[@ryanjacob8568]

Really nice! I’m assuming you used mainly southern yellow pine and birch plywood?

[@bentswoodworking]

Ryan Jacob for this particular one that is correct

[@cambiumlayer1318]

You are definitely a talented Artist!. Woodworking is such an amazing skill. Do you sell these?.

[@bentswoodworking]

Cambiumlayer 13 thank you. Yes, this was a piece requested by a client

[@jasontoms7065]

How did you measure up for aluminum plate on the cabinet and what was the measurement for the holes on the brackets

[@bentswoodworking]

Jason Toms I lay everything first before drilling any holes.

[@russalbright4213]

That looks outstanding! Great job as usual. I sent you a question on the last video you sent out about cutting the vinyl strip on a Festool track. I put it in the "Discussion" part of your page. I am not sure if I did it right, or if you got a chance to look at it, but if you do get a chance, I would like to hear your opinion. Thanks!

[@bentswoodworking]

Russ Albright first off, thank you very much. Second, I wasn’t aware of the discussion post. I guess I don’t get notifications for those. I’ll take a look.

[@russalbright4213]

I completely understand. Plus, you are a busy guy. If you do get a chance I would be very interested in your opinion. Thanks for the awesome videos!

[@Cptchaos296]

Quick Question, What rail and stile bits did you use here? Have been using my table saw to make these and I think its time move over to router. Thank you!

[@bentswoodworking]

They are the tongue and groove bit set from Freud

[@Cptchaos296]

@@bentswoodworking Thank you Sir

[@sandrarattray1202]

Exactly what I’m looking for. Jason, do you plans available for this build ?

[@bentswoodworking]

I do not have any plans for this unfortunately

[@dannyvillar9493]

Thank You for sharing this. Beautiful work. Did you rip your own 1by or just purchased them to sized? Thank You

[@bentswoodworking]

Made my own 👍

[@dannyvillar9493]

Thank You for responding :)

[@Gigitalaloca]

Can you please tell me what's the hardware you used to install the doors on?

[@bentswoodworking]

I actually have a video on that specifically

[@antoineadams791]

What are and where did you get the rollers from for the top rail?

[@triksyheiba]

Can I add the rails on the bottom as well?

[@bentswoodworking]

I don’t see why not

[@RonMarshallrone]

Great video! Were you using whitepine 3/4" for the face frame?

[@bentswoodworking]

I used furniture grade pine for the project as requested by the customer. My local lumber yard sells really nice pine

[@RonMarshallrone]

@@bentswoodworking Oh thats cool...I just got a quote from our lumberyard yesterday for some 8 quarter furn grade pine. I'd just never seen it in person before. It looks pretty decent on yours. I'm gonna have to give this stuff a shot. Thank you!

[@brandonmag57]

What size and thickness aluminum did you use for the door attachments?

[@bentswoodworking]

Brandon Magallon 1”wide and 1/8” think aluminum bar

[@brandonmag57]

Bent's Woodworking also, do you nail the face trim to the carcass or just use glue?

[@bentswoodworking]

Brandon Magallon it depends. Even if I nail it, it’s just to hold it till I get clamps on it

[@goemaerefabian6998]

excellent merci pour ton partage possible d avoir les plans

[@bentswoodworking]

goemaere fabian I don’t have any plans but if you search for Nikki Grandy Sliding Door Console you will find some on the internet 👍🏻🙂

[@matthewwright4188]

What is the tool you use to measure and draw lines with? You have link fr that?

[@bentswoodworking]

It is a Incra Tiny T

[@matthewwright4188]

Do you find that you use that one more than a 6” one? Thanks for getting back with me on that. I appreciate it.

[@bentswoodworking]

Matthew Wright I definitely use the tiny t more then the 6”. More then anything for that matter.

[@matthewwright4188]

I think I will get one. Especially after watching you use it and watching the incra video on their products. My 6” combo square just doesn’t compare and that’s just from watching the video.

[@_esmeralda_5112]

How much did it cost to make this project ?

[@bentswoodworking]

If I remember correctly the materials cost around $300 but that is totally dependent on local pricing

[@alma-powell]

How much does this project cost?

[@bentswoodworking]

Depends on the materials you use. This one, maybe $300 in materials

[@David-fv7zg]

Do you have a resource for this door hardware?

[@bentswoodworking]

I have a youtube video that shows how I make it.

[@abcdeqwerty123]

@@bentswoodworking I think they are asking for the Tools and parts used in the video for the stand. It's hard to replicate without that info. You can list the parts with dimensions and tools (even link to specific tools for sale online) so people can make it themselves

[@dylanknifley7626]

What would you charge for that?

[@stevengates8351]

Well done. You on instagram?

[@bentswoodworking]

Steve Gates thank you and yes my handle is @bentswoodworking

[@goemaerefabian6998]

oui comment pour les plans

[@eric44707]

Plans for sale??

[@bentswoodworking]

Not for this unfortunately

[@rdknght17]

Not identical but pretty similar. www.woodbrew.tv/product/barn-door-media-console-plans/

[@mingerib]

And you only need to take out a loan for $50,000 to get the shop and all supplies shown in the video..

[@mattpkp]

He built his shop of wood working profits, another excuse to do nothing

[@mingerib]

@@mattpkp I have done the same, currently saving for a 10" jointer and festool domino!