DIY Solar Generator Build - Episode 2: 12V Power Module Setup

[@dan32one44]

Good 👍 stuff 😎

[@aa999xyz]

looks pretty clean and sharp! If you want it faster USB c charging just a step up module fro from 12v to 24v

[@StoneBrokeAdventure]

great tip . i may just try that

[@photog1529]

Great job...very nice and clean install. With all that gear, does the Bauer box have a lot of flex?

[@StoneBrokeAdventure]

it flexes a little but it is a solid box once the lid is colsed no flex at all. it can definatly hold the weight of the componets

[@Barc7580]

New Subscriber 🎉. Been wanting to build something similar for a while and started my research. Found this channel and is exactly what I needed. Very detailed. Thanks. Was wondering what your thoughts were on expansion ? A pair of 12v 100ah in parallel or serial And also what you thought of using the new watt cycle 12v 300ah mini battery instead (needing thicker wire to the inverter and possibly larger Anderson connectors)

[@StoneBrokeAdventure]

you only need thicker wire if you increase size of watt output of inverter inverter. (ex. 2000watt to 300watt) If you run 2 12v batteries in parallel voltage stays 12v. you run in series your voltage increases (2 12v bat in series equals 24 v) so you would need to change your inverter to one the appropriate voltage (12v to 24v) but higher voltage will decrease amps which means smaller wires.

[@Barc7580]

@@StoneBrokeAdventure thank you

[@medot8296]

Hi. How's the "Li Time" battery treating you? Cool setup.

[@StoneBrokeAdventure]

it is working as expected. Ive worked with several bateries in the past and the quality of the build on this one is top notch and the Mini series works great for this aplication. i have another video of a test on the litime battery. check it out on my chanell. i am currently in the process of building out the second modual.