No video

DIY Sparkle guitar painting and finishing

  Рет қаралды 31,951

The French Guitar Guy

The French Guitar Guy

Күн бұрын

Here is how I made a guitar painting close to a pro result, only with spray can and in my little garage!
I'm an amateur DIYer trying to learn how to make guitars in my little workshop. I'm not a professional luthier and I'm equipped as a "Sunday handyman", so bear with me :)
Subscribe to follow me in this adventure until the end of the project! Have a nice time!
The musics used are mine.

Пікірлер: 83
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
[EN] - Some datas :) - 8 days of work spread over 6 weekends (mostly drying time) - 2 cans of primer, 1 can of pink paint, 1 can of glitter and 2 and a half cans of varnish (I need to figure out what to do with the rest of the varnish before it's wasted) - 135€ of paint and sanding paper, without counting the polishing products and the polishing foam... I hope this made you want to try it, have fun! --------- [FR] - Quelques stats :) - 8 jours de travail réparti sur 6 week-ends (majoritairement du temps de séchage) - 2 bombes d'apprêt, 1 bombe de peinture rose, 1 bombe de paillettes et 2 bombes et demie de vernis (faut que je trouve quoi faire du reste du vernis avant qu'il ne soit perdu) - 135€ de peinture et de papier à poncer, sans compter les produits de lustrage et les mousse de polissage J'espère que ça vous a donné envie d'essayer, have fun !
@peachmelba1000
@peachmelba1000 Жыл бұрын
To avoid sanding off most of your base layer of primer, shoot a layer of clear lacquer or sanding sealer first (and let it cure properly). Level that layer before applying the primer. It makes the process thereafter much faster.
@peachmelba1000
@peachmelba1000 Жыл бұрын
Aussi, si vous en avez une, apportez une impermiable plastique pour eviter des petits fibres des vestements à poluer le painteure. Final result looks great.
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
​@@peachmelba1000 Yeah, I didn't had sanding sealer at that time. But the main problem for the first layer was my prep sanding... It wasn't clean enough ^^ It was more work to do, but hey, it works lol 🤷‍♂
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
@@peachmelba1000 Yeah you're right! Thanks a lot man!
@peachmelba1000
@peachmelba1000 Жыл бұрын
@@FrenchGuitarGuy On my channel, you'll see a short video of an offset Flying V I finished last month. That guitar's finish has three tiny grey fibers in it at various spots. I didn't noticed until after I shot the lacquer lol
@AllanCorona
@AllanCorona Жыл бұрын
A lot of people don't appreciate the struggle of making or finishing a guitar at home without the proper tools. It's a long, tedious process and usually criticized. You did a great job, specially on the custom spray booth! very creative! Amazing results!
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Thanks man!! It means a lot 🙂
@schreds8882
@schreds8882 Жыл бұрын
That metallic paint from Montana Cans is known for those drips. The nozzles are designed for graffiti murals so they are focused and put a lot of paint in a small area. I had the same problem painting a guitar with the copper metallic. Good job though. You are much more patient than I.
@rudybigboote3883
@rudybigboote3883 Жыл бұрын
I see you have met my arch nemesis… sanding! To me that is the most tedious part of the build. You should spray in controlled passes, not the back and forth motion you use. That’s why you got runs. Killer result man.
@jounilehtonen2379
@jounilehtonen2379 Жыл бұрын
This video will be my guide when i start to work on my Strat. Thank you very much for this.
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Have fun!
@alexanderbearup9709
@alexanderbearup9709 4 ай бұрын
the paint running and the "oh s**t" ohhhhh weve all been there brother haha! thanks for an awesome video!
@ElIsraelJijijiji
@ElIsraelJijijiji 22 күн бұрын
I would recommend you add a tailpiece or something that reliefs the angle of the strings at the bridge Nice build btw
@VintageRadius
@VintageRadius 9 ай бұрын
Sick! BTW, kudos to you for sticking with a filler that sprays on like popcorn ceiling. OMG! Looks like you spent HOURS sanding that stuff...but got there in the end. Looks great
@FrenchGuitarGuy
@FrenchGuitarGuy 9 ай бұрын
Ahah, thanks a lot! Yeah, finishing requires a LOT of sanding..!
@johnemery2896
@johnemery2896 4 ай бұрын
This came out incredible! Ill be trying this soon!
@machinesdeguerre
@machinesdeguerre 8 ай бұрын
Un des meilleur tutoriel pour un excellent résultat! Wow oui j'ai envie d'essayer!!! Merci!
@FrenchGuitarGuy
@FrenchGuitarGuy 8 ай бұрын
Merci beaucoup pour ton retour 🙂 N’hésite pas à me dire comme ça s’est passé !
@RayVansMusic
@RayVansMusic 17 күн бұрын
Great job! I don’t truly know if I have the patience for this but I will be trying to refinish a guitar soon! I’m leaning towards getting nitro aerosol cans
@FrenchGuitarGuy
@FrenchGuitarGuy 17 күн бұрын
Thanks! You can do it, but nitro need way more patience :)
@sebgamart-guitarcoversandt6645
@sebgamart-guitarcoversandt6645 Жыл бұрын
Bah dis donc ! Tu t'es sacrément bien démerder pour la peinture et le vernis ! Bravo superbe finition ! 👍
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci beaucoup ! Pour être honnête cette fois c'est pas ma première expérience de finition de guitare 😄
@predigr
@predigr 2 ай бұрын
Very awesome work!
@BlaudezGuitars
@BlaudezGuitars 2 ай бұрын
Le rendu est ouf! Pas fan des paillettes mais là c'est super propre.
@rocinblues
@rocinblues 6 ай бұрын
That paint job on that axe is impressive !
@FrenchGuitarGuy
@FrenchGuitarGuy 6 ай бұрын
Thanks a lot!
@clementpevrier4368
@clementpevrier4368 Жыл бұрын
Bravo, hyper stylé 👍
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci 😉✨
@yd6492
@yd6492 Жыл бұрын
Impressionnant ! Je suis certain que ma R16 TS de 82 serait aussi flambante après 4000 heures de polissage 🤩
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci ! Ça c'est sûr ! Globalement ce sont les mêmes méthodes qu'en carrosserie (mais en plus petit ahah). J'ai usé de la même technique sur mon vieux van aménagé, j'y ai passé un temps de fou mais ça vallait le coup.
@uppalaganinabubble7529
@uppalaganinabubble7529 Ай бұрын
Wow im doing a build now. Any suggestions for a dark Lake Placid Blue sparkle. You did a fantastic job with the pink spakle.
@FrenchGuitarGuy
@FrenchGuitarGuy Ай бұрын
Thanks! Yeah for dark color, you need to finish with a really fine polishing compound (fine scratches are more visible on dark color)
@SpinTwistPaintRig
@SpinTwistPaintRig Жыл бұрын
Excellent!
@philiphurdwell3443
@philiphurdwell3443 11 ай бұрын
Great job!!
@FrenchGuitarGuy
@FrenchGuitarGuy 11 ай бұрын
Thank you!
@f2plover287
@f2plover287 Ай бұрын
Could you try the color shell pink exact color look from the 60s fender telecaster?
@spokes28
@spokes28 Жыл бұрын
? Great job, beautiful finish. Where did you find the three head sander! Did you like using it?
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Thanks! It's the "Bosch easy curv sander", very cool little thing
@patb64
@patb64 Жыл бұрын
Super!!!! Hate d entendre sonner 👍👍💕
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci ! Dans la prochaine vidéo !
@patb64
@patb64 Жыл бұрын
@@FrenchGuitarGuy 👍👍👍💕💕💕
@althazardcadet1758
@althazardcadet1758 Жыл бұрын
Beau résultat et très jolie choix de peinture, même si les méthodes employées n'étaient pas très conventionnelles! Pour un meilleur résultat au ponçage n'hésites pas à utiliser des cales à poncer et tu auras moins de travail ensuite. Pour ce qui est de la peinture en bombe ton mouvement doit être rectiligne. Verticalement ou horizontalement mais le spray doit commencer avant de toucher la pièce et terminer après. car quand tu appuies ou relâche alors que tu es encore sur la pièce la pression de la bombe de peinture n'est plus la même et c'est la que tu risque des coulures ou des "pâtés".
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci !
@andyking7621
@andyking7621 10 ай бұрын
Great work ... I shall not be doing that as I'm 52 years old and life is too short ... Looks terrific though.
@edysguitar
@edysguitar 7 күн бұрын
Great video! Do you think this can be done in white color as well? Thank you!
@FrenchGuitarGuy
@FrenchGuitarGuy 6 күн бұрын
Yes, definitely!
@danielbarbieri8199
@danielbarbieri8199 7 ай бұрын
Le mieux est l'ennemi du bien... arghhh les méchantes coulées 😂 Pour polir à la fin, j'utilise du miror et je polis à la main. Mdr le rasoir 3 têtes 😆 Un petit tuyau pour poncer avant le bouche pores, je pulvérise de l'eau et je laisse sécher. Ça fait ressortir toutes les petites aspérités du bois. Le rendu est velours.
@FrenchGuitarGuy
@FrenchGuitarGuy 7 ай бұрын
En effet :)
@PoulpeViolet
@PoulpeViolet 6 ай бұрын
Moi qui voulais refaire la finition d'une de mes basses, quand je vois la masse de taf que ça représente, à savoir que je n'ai pas de garage... Mon dieu 😅😅 Dans tous les cas, bravo pour la patience et le résultat 😉
@FrenchGuitarGuy
@FrenchGuitarGuy 6 ай бұрын
Je t'invite à essayer un jour sur un petit kit à pas cher, ça vaut le coup, et même si tu n'auras certainement pas un résultat parfait, tu en seras fier quand même ! Faut prendre son temps et être patient (et c'est dur ahah). Si tu n'as pas de garage, attends le retour des beaux jours avec un temps plus clément, sans trop de vent 👍 Bon courage et merci pour ton commentaire !
@lowbeam5005
@lowbeam5005 9 ай бұрын
absolutely great job! where did you get that body btw? It's beautiful!
@FrenchGuitarGuy
@FrenchGuitarGuy 9 ай бұрын
Thanks! It's an homemade body!
@lowbeam5005
@lowbeam5005 8 ай бұрын
@@FrenchGuitarGuy I noticed after binge watching all your videos! It's so well finished I thought you bought it somewhere. I personally love offset bodies but I think jazz/jag ones are a bit too elongated and this honestly looks like a better version of those. Good job!
@FrenchGuitarGuy
@FrenchGuitarGuy 8 ай бұрын
@@lowbeam5005 Thank you very much mate! That's very kind! The next video the next video (or the one after that) will be about that guitar, so stay around :)
@OMS1969
@OMS1969 8 ай бұрын
Sounds great! Lol
@FrenchGuitarGuy
@FrenchGuitarGuy 8 ай бұрын
Thanks!
@adilsonobelard9690
@adilsonobelard9690 7 ай бұрын
of course the serus j is much thin than this body where did you manage to purchase this body? thanks and nice videos
@FrenchGuitarGuy
@FrenchGuitarGuy 7 ай бұрын
Thanks, I made it (you can find the build on my videos)
@vikaldebaran6462
@vikaldebaran6462 Жыл бұрын
Super !
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci !
@SIX1NINEGUITARSANDGEAR
@SIX1NINEGUITARSANDGEAR Жыл бұрын
Bro what is that little 3 pad sander I need that in my life
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
It's a Bosch EasyCurv Sander, that little thing is awesome, I recommend it! (hello @boschfrance1474 👋) Btw awesome channel man!
@diversionsindustrielles2011
@diversionsindustrielles2011 Жыл бұрын
waow superbe !
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci !
@clementprimat
@clementprimat Жыл бұрын
Canon 😎
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Merci beaucoup !
@chrisfain3612
@chrisfain3612 Жыл бұрын
What was the 3 pad sander and polisher you used? Thank you
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Hi! It's a Bosch EasyCurv Sander, that thing is awesome, I really recommend it
@hugolunacastellanos285
@hugolunacastellanos285 5 ай бұрын
Where you get the spry paint?
@FrenchGuitarGuy
@FrenchGuitarGuy 5 ай бұрын
On a french website, you can find this spray can quite easily here in europe
@ThePurpelephant
@ThePurpelephant 9 ай бұрын
Wet sand from primer on, am I wrong?
@FrenchGuitarGuy
@FrenchGuitarGuy 9 ай бұрын
Nop, wet sanding only on the final clear coat for the sanding/polishing process!
@cheshirewise942
@cheshirewise942 Жыл бұрын
Why sand it?
@yeknommonkey
@yeknommonkey 8 ай бұрын
If you don’t sand it each coat just adds to the bumps of the last making them bigger. If you sand in between coats you’re giving each fresh coat a smoother and smoother surface to lay on as divets are filled and high points are sanded away so you gradually improve the flatness of the surface and eventually can get a mirror like reflection at the top once polished.
@jupiterlegrand4817
@jupiterlegrand4817 Жыл бұрын
Sandpaper should only be sold to licensed professionals. Jeez Louise that was painful to see.
@FrenchGuitarGuy
@FrenchGuitarGuy Жыл бұрын
Ok bro, can you be more precise?
@ghalston5641
@ghalston5641 Жыл бұрын
@@FrenchGuitarGuyI think he meant it is better to use a sanding block rather than hands and folded sandpaper. Also, far better to just dust on a coat that you can see through using long strokes that start and end past the surface you are painting. But hell , your end product came out pretty good.
@DrummClem
@DrummClem 11 ай бұрын
The end result is all that matters.
@franckydookie
@franckydookie 18 сағат бұрын
Have you seen the result ?
PRS Silver Sky Nitro Sparkle Refinish
16:36
Dallas Stewart
Рет қаралды 22 М.
7-string Custom Guitar Finish: brushing, polishing, spray-painting, varnishing
14:27
Kind Waiter's Gesture to Homeless Boy #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 13 МЛН
الذرة أنقذت حياتي🌽😱
00:27
Cool Tool SHORTS Arabic
Рет қаралды 20 МЛН
Guitar Finishing: How to spray translucent lacquer colors on a custom guitar
4:13
The Easiest Guitar Spray Painting Tutorial (Final Part)
22:01
Brad Angove
Рет қаралды 9 М.
7 GUITAR Paint Job MISTAKES You Should NEVER Do!
20:15
Max Solo Music
Рет қаралды 440 М.
How to Spray Paint Your Guitar, Complete Tutorial, Start to Finish
30:52
Tom Peterson-Guitars and Cars
Рет қаралды 66 М.
Fender Mexico Stratocaster Refinish Make it a pink guitar!
22:46
Andy bass & guitar
Рет қаралды 492 М.
Can I Build a Music Man Mariposa in my garage?
20:22
The French Guitar Guy
Рет қаралды 10 М.
How I Level Sand And Buff The Finish On A Guitar
17:05
Highline Guitars
Рет қаралды 197 М.
How To Make The Simplest Electric Guitar - DIY Guitar From An Old Wooden Board
6:31
Mykola MrHardGuitar - Guitar Reviews And Lessons
Рет қаралды 53 М.
Kind Waiter's Gesture to Homeless Boy #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 13 МЛН