DIY SPEAKERS FOCAL STELLA UTOPIA CLONE TIME LAPSE part 2

[@gasperbregar630]

Did not realise how huge these beautiful speakers are until I saw TIW 300 woofer. Amazing work!

[@roodenberg]

What a commitment making these, really impressive! Time for you to go and enjoy the sounds and the looks.

[@tudorcojocaru1402]

Gratuliere VLADIMIR!!!

[@benoitdugas745]

Beautiful workmanship!

[@a.d.7099]

Well done Vladimir, amazing job, enjoy!

[@Sixfeetund3r]

Wow that's phenominal man! I actually used the Satori drivers to build a Wilson Alexx clone, and i'm finally about to paint them! Took a couple months of dedication and obsession to say the least. I'll likely make a video about them as well

[@GladiatoR550Senta]

well done man ! would you be willing to share the cad files for the enclosure - cabinets ?

[@TheSagitis]

Selling it for small fee would be great as well

[@kientrungmai5598]

@@TheSagitis knowing that it's a replica, I don't think it's a great idea

[@theoracleprodigy]

Wow! I was wondering what you were going to put into them. Didn't disappoint at all. Mindorf caps and foil inductors. I bet that crossover was pretty penny.

[@setht.1181]

I wonder how do they sound. The enclosures look fantastic, but to get the sound right it need a lot of design effort.

[@behappybevegan]

Amazing. Tried to read the model numbers on the drivers but I failed. Could you tell me what drivers you used?

[@veenudhiman1048]

Greatjob Sir. tell me Sir wich tweeter model number is used. I can't see in picture image in video and also crossover component with list with model nummer. Make new videos also. Appreciate your work.

[@bennip.5009]

Great work, but you have to use black screws, the bare screws don't match the look.

[@trashaccount5122]

Very nice, a sound demo would be cool. Great job non the less

[@kako4967]

At next video on channel

[@jakubnic182]

tak to je paráda... excelentní práce... a TIW300 mám v atlasech... potěšilo

[@davidnewboult6887]

Fantastic work, you really are a very talented man, I think it only fair a short demonstration video would be nice, but only when you are happy with them Thanks

[@kako4967]

At next video on channel

[@davidnewboult6887]

@@kako4967 Great: Thank you

[@robertlee1145]

I would love to purchase the plans for this or purchase the cad file.

[@cruise2023]

Brilliant, would absolutely love to own these.

[@cdbennett2332]

Awesome cabinets. Why not go with focal drivers?

[@Kahsimiah]

Wow, where did you find the plans??

[@ceosealemon]

Crossover, case making, woofer. How much did it cost?

[@maxbouvatte]

I wonder how it would work if someone wanted to start a business doing replicas like this, and having the final price be a fraction of the source model cost. I guess it probably wouldn't be legal? I am just thinking out loud as I have access to a cnc router and lots of other heavy duty tools

[@zwergi666666]

Pekne ale jednoznacne bysom dal cierne srubky

[@JiriJHHorak]

Skvělá práce! 😲😲😲

[@danielwitkowski9730]

Witam jakie głośniki pan zamontował w tych kolumnach pozdrawiam

[@WelkySchullin]

Super! Plánujete i nějaký stereo zesilovač? Myslím, že by vašim bednám velmi pomohl ukázat co v nich máte! Moc pěkné

[@ВікторСухий-б8р]

Молодец мужик. Интересно во сколько обошлись работы по изготовлению этих колонок. А АЧХ делали?

[@milanpavlis688]

Prácička perfektná, tiež by som dal čierne šróby aby to tak nesvietilo - keď nie sú mriežky. Ale - nie sú zbytočne veľké na min. 5x menšiu miestnosť? Ps.: zaslúžili by si nejaké schopné monobloky....

[@Vladimir-jm2vk]

Молодец чувак 👍

[@jingq6877]

amazing project

[@lldlaladay7163]

Nádhera. Máš tam vedle nějaké jednopasmo, taky tvá práce?

[@danlivni2097]

So impressive

[@michaelpaul9672]

If one of my drivers go bad could i replace it myself? Or do i need to send it back to factory?

[@kotokoto9472]

Проверка звука при выполнении ??????? A sound check when you do ???????

[@kako4967]

In others videos you can see

[@kotokoto9472]

@@kako4967 - Which are already posted or which are to follow

[@kako4967]

@@kotokoto9472 already posted

[@martinmrazek4768]

skoda , original drivery by vas nestaly tak moc ( az teda na ten tweeter)

[@kako4967]

Focal uz hodne let neprodava menice pro home audii. Jen pro car hifi

[@zackpetrovic3029]

SB Acoustics nice choice, total cost?

[@kako4967]

+- 3200€ without CNC. SB Acoustics are only mids , tweeter is scan-speak a woofer visaton

[@michalpytel496]

@@kako4967 3200 wihout CNC, time spend on drawnings?

[@daviddavidsonn3578]

Should have used carbon steel screws to have black screw heads.

[@tomkocur]

Az zbytocne komplikovane, ale v konecnom vysledku to vyzera vyborne, aj ten TIW opticky celkom sedi k Satori. Ja osobne by som skrutky vymenil za cierny imbus, tieto dost svietia. A ked uz je to klon, tak na vyskach nejake berylium :D

[@kako4967]

Chtel jsem aby se to co nejvic podobalo originalu, a ti maji taky nerez srouby :) a pro me oko to vypada lepe, alespon neco rozrazi ti predni cernou stenu. Berylium bylo v planu, ale ceka se az budou dostupne repraky. Takze zatim tam jsou scan speak R3004/602010 doufam ze behem ledna dorazi R3004/604010

[@冼文辉-h2q]

Dreams come ture👍

[@eunuseffendy4620]

What drivers did you end up using??

[@kako4967]

At second video at channel you can see it

[@jusjash]

Brilliant 🥇🥇🥇🥇🥇🥇

[@joskabouw]

Wooooow NICE job 👏 👍 👌 Are you happy with the sound performance?

[@kako4967]

Sounds great. Satori is good driver for mid. Have some issues with bass but is ok now....TIW need more time play....give them 16hour with 20hz signal and now sound briliant.

[@joskabouw]

@@kako4967 thx for the reply... i have had this plan because they look awesome and the focal sound also g great... for a long time ... but looking at you video and the cnc involved .... wooooow just a hugh effort... so i got scared now... maybe in the future

[@joskabouw]

@@kako4967 would you be willing to share the cad files for the enclosure / cabinets... I may want to check here how much is cost to make them. and play with alternative drivers. Based on what did you selected your drivers and filters?

[@kako4967]

@@joskabouw i can tell you what they cost. 500€ for mdf, 38hours x 80€ cnc, 700€ pant..... and drivers+crossovers what you want.....in my case cca 2000€

[@joskabouw]

@@kako4967 Thx for that info. That is actually not the crazy. Can you share or sell me the 3d model cad drawings and that then can be used to for the CNC? From your name I assume you are polish and live there?

[@crissnickers_frog6689]

no sound demo?..........just like the big one!

[@kako4967]

At next video on channel

[@alainduquenois3812]

Sa ressemble à du focal grande utopia

[@HowDareYouu]

why bother do a clone when u can make your own design...

[@treborreissul]

Cheap parts

[@MWWISH]

yeah, right: Please be a crybaby instead of appreciate the craftsmanship of this man =D

[@treborreissul]

@@MWWISH yes, but cheap parts anyway.

[@MWWISH]

@@treborreissul Those speakers will outperform Focals originals in the right room, just because even people who can afford the originals have mostly shitty room acoustics in their homes ^^

[@treborreissul]

But, the people there’s buying these loudspeaker have the money to arrange the room acoustic. And the money for the house… Me, i am not jalouse, you, not sure.

[@MWWISH]

@@treborreissul Jalouse, me ? I have speakers worth 1200 and Amps worth around 1200. A friend of mine is audio-engineer and works for a loudpeaker manufacture. He said my room-acoustics are better than many professional studios he visits and people spending a ton of money for what i got under 2500 ^^

[@haffik]

Či by nestálo za hriech tam dať originál Focal meniče.