Think I'm going to try this before buying the g2. Thanks for posting
@outandaboutinoz4 ай бұрын
Thank you for your video, it was very helpful. Living in Australia, it costs me a lot in freight to buy one. I did your mod today and it works well on my TDM900. Thanks.
@ufixit3 ай бұрын
Thank you for the feedback. I’m glad it helped. Ride safe.
@MrMotoX4503 жыл бұрын
Very cool mod. I have this problem with my bike and I don't like the idea of the G2 because I hate glue-on grips. This mod will let me keep my lock-on grips. Thanks!!
@ufixit3 жыл бұрын
Hope it works for you. Thank you for the comments.
@TheOffCycle10 ай бұрын
Why G2 does not just make lock-on compatible cams is beyond me. Missing out on a big market
@nvmcrider84752 жыл бұрын
Great idea with the Dremel, I was thinking of using a hacksaw blade held by a vice, but this is way better., You just saved me some money, Thanks
@frikherbst54553 ай бұрын
Thanks for the assistance. I replicated this exactly, then it failed on my first big trip. I replaced the brace on the front by the seat with stainless steel. Now 200%.
@victorcohen67468 ай бұрын
This is a great DIY project, thanks for posting it. What diameter is the spiral cut bit and where can it be purchased?
@bikedawg2 жыл бұрын
Very helpful! How many millimeters did you shave off? and what is the length of the shaved channel?
@noob-rider4214 жыл бұрын
Haha, thanks. Found this at a very timely time. Like you, I dont have the money to get all the little things I need, so this was awesome. Will do the mods on a CRF450R
@ufixit4 жыл бұрын
I’m glad you found it helpful.
@my-max-media76213 жыл бұрын
I've wondered if the slack or freeplay in the dual cable setups gets wonky because I'd think the "push" cable would bind up.
@ufixit3 жыл бұрын
I haven’t noticed any negative effects. No binding or slack.
@emfl44373 жыл бұрын
Thanks! Will definitely try this out.
@jorgruff8502 Жыл бұрын
Perfect 👍 just did it and it worked well 👌
@SPEEDYBEANIE223 ай бұрын
I’m looking to do this mod on my crf 250x
@robscheer7140 Жыл бұрын
Thanks Man!😊
@rockyeasterline3484 жыл бұрын
Are you sure you are going to get totally Full Throttle !! it seems to me you will only get about 3/4 throttle is that true
@ufixit4 жыл бұрын
Thats a good observation. The full throttle stop is limited by the cable and movement inside the throttle body. Getting full throttle with this mod requires less than 1/8"extra throttle rotation. Its probably more like 1/16". Be careful out there!!
@Followthepinas Жыл бұрын
Awesome video! I'm thinking of trying this on my Honda cb650r.
@Remop11 ай бұрын
Did you the mod ? Was it effective ? I've got the same engine (cbr650r) and got the same problem 🥲
@Followthepinas11 ай бұрын
@@Remop no I didn't. I got my ECU flashed by Moore Mafia and it smoothed out my throttle response.
@Remop11 ай бұрын
@@Followthepinas Oh ok. It's clearly a problem of injection. Do you know the new parameters? More fuel consumption? Jerky all removed? I like pretty much this bike, just enough for me, and i don't want to sell it because of this 😢.
@Followthepinas10 ай бұрын
I don't know the parameters. I mailed the ECU to Moore Mafia and they sent it back about a week later with some instructions. It got rid of all the jerkyness.
@CougarsHockey Жыл бұрын
Thank you
@chrischrestensen38852 жыл бұрын
Total Goonad!
@loudavis9113 жыл бұрын
If you think the throttle on an underpowered, overweight boat anchor is too twitchy, you're the problem.
@ufixit3 жыл бұрын
Just trying to help my fellow man. I hope you find whatever it is in your life that is making you so unhappy.
@SubMad0263 жыл бұрын
@@ufixit Im likely going to try this on my ZX10R, which is nearly dangerous in parkinglots (especially if damp or sandy) due to the twitchy throttle response. Some folks live to be internet trolls, I however appreciate your video.
@Followthepinas Жыл бұрын
@@SubMad026 how did this mod work out for you? I'm thinking of doing it to my Honda cb650r. My throttle is way too responsive/twitchy it's hard to just Cruse.