I know this is 2 years old but I think you may be misreading your torque procedure wrong. All of our Danas have taper bearings and they are never final torqued. The GM manual calls for 50 lb/ft preload, back off loose then 35 lb/ft then back off 1/4 turn. the lock nut gets 66 lb/ft You want .001 - .010" play on the hub. The Rockwell 12" is the only one that gets a final preload on the bearings as they are barrel style bearings - gets 50 then back off an 1/8th turn with 250 lb/ft on the lock nut

Where the follow up video?

Thank you Mr Life Saver! only thing i will add. I was able to perform this with out removing the water hose. I used a bungy cord to tie the hose up attached to the lift hook.

Link doesn’t work

I cannot thank you enough .... 4 hours on the phone trying to get a representative, another 3 hours having tried finding different solutions... didn't know I need to be an engineer to figure out how to scan.

🔥🔥🔥

The 8mm bolt that holds the little bracket doesn't go into a hollow section, you can leave it off, just clean the threads out if you were to reuse it for some reason in the future. You can put your head in there and see it.

Maybe a couple of solderless connectors, a small cheap multimeter and some fuses.

Great kit! The storage solutions are brilliant.

Helped me with my 2013 Kia Forte starter replacement. Thanks😊

My axle shaft wont pull off any tips

Did the ecu help lighten up the god awful engine breaking?

Part # or link for the header you got I had to modify my fmf q4 to fit shock header on the 2022 450RL

What happened if i take off the tube longer and only use the tube short

Luv it

Carplay is far superior to any brand of GPS, right up until you lose cell service. Then you’ll wish you still had your GPS.

great video. i have same workhorse chassis. can't find front passenger side brake hose. do you by chance know the part # ? or what parts store carry them?

Thank you for this

thank you so much..😸

nice

Where did you locate the hub specs for your P32? *I’m working on P42 w/ Dana 80, but unable to locate any diff specs

Thank you

is the email address I'm putting in my email or should I be creating a new email specifically just for the printer?

My 2003 F250 seat back flips down when you press a lever on the side. What year did ford stop doing that?

Can you still control calls and music from the cardo unit or from carpuride or both?

You saved my life with this, man. I had given up on getting this starter out, which meant losing my job, being out on the street, turning to crime, prostitution, and the brief respite offered by drugs. You really helped me out. That sounds like a joke, but that's the reality of being in a tough spot with no options.

Thank you, great video, my son and I replaced our starter.

I like that you are very detailed but you don’t take forever to explain everything you are straight to the point but you make sure it’s easy enough to learn

hi, what do you mean by gmail password? some of us have 2 step authentication. Is there a way for that? thank you

Thanks. Helped me out a lot.

What year is this optima? Great video

What year, make and model?

caution! Don't buy from rock auto. The right part number with the correct picture came in as a drum instead of a rotor for the rear and they have no way of helping you. Stuck for 2 freights now. coming and going. Now I know why the price was so good

They are called Rear Spindle Nut Set with Ratchet Style Spindle Nuts

Just my luck. Took my 2004 P32 axle out and the lock nut is a ratchetting lock nut. Ever see one of them. I think it preloads at 50 ft lbs and then release and snug up to zero lbs. Any information would be appreciated. Have nice day.

Adding a comment to bump.

hi can you tell me ( or do you know ) the torque spec you pur on the front spindle nut if you evr change the bearings on this 5 studs hub thank you

Thank you

Awesome video. I was just a little worried because you wouldn’t disconnect the negative from battery. 😵

Did not see the torque for the axle cover nuts

Thanks for the help

Game Changer!!!!! Like you said. Easy job when you have someone to take the time to go step by step and talk in English not Mechanic

Thank you! Awesome tutorial

You don’t have to go through all that. Jack it up, remove plate with 4 bolts, remove fresh air intake tube, starter 2 bolts and remove. No cooling hose, no intake plenum, no fan assembly, no throttle body removals.

Take the battery out first and give yourself a little more room, then curse the engineers who designed this engine

THANKS!! Easy peasy

Hi! Hi! After using the 502 for some time, are you still happy with the device and with its size? Would the 702 be too big for the Ténéré? Thank you

I used my Infina Ray thermal camera mounted on a pair of VR googles for under 350 bucks including the camera. I can see over 500yards as clear as day, the simple vr googles allow me to pop my phone in the googles. The whole unit is actually much smaller then these box goggles.

I have an ‘88 super chief 31QR and was wondering if a 4 ton hydraulic jack would be enough to jack up a corner at a time to put it on stands? Otherwise the only other way I can think to lift it is cutting a 2x12 into 12x12 squares nailing a bunch together so I can use a 10 ton bottle jack to lift up an axle at a time. Currently it’s a no crank, I just replaced the continuous duty solenoid and I hav rust to see if that fixed the no start but it sat for a while and it might have electrical damage from rodents In the back so I’m not certain the levelers will work.

outstanding video!!!!!!!!!!!!!!!!!!!!!!! thank you so much