Just changed the oil on my wife's Sienna for the first time this past weekend after watching this video. Well done! Thank you for the great instructions and for breaking this down so well.
@mohsinr48893 ай бұрын
What's the filter removal tool size ?
@mohsinr48893 ай бұрын
What's the filter removal tools size please 2011 sienna
@thesoundpainterbkny34654 жыл бұрын
This is the Best Toyota oil change video, Num #1. You included the pressure on the Torque. Thank you!!!!
@angelramtiz63095 жыл бұрын
This is the BEST video on how to change your oil on a 2017 Toyota Sienna! Good job!
@waseemsiddiqi83984 жыл бұрын
Nice - the only youtube video that is complete in all the steps for changing oil/filter for sienna. Thanks. I just changed oil/filter on my sienna 2017. That plastic thing to remove oil fromthe filter was difficult to get in.
@hugh33235 жыл бұрын
I've watched a lot of Utubes on the Sienna oil change and this one is GOOD!
@staceyhunt22913 жыл бұрын
I was gonna say the same. the right way including torque lbs. !
@CalFunInSun3 жыл бұрын
I was gonna say the same too! So easy to follow clear and all the details 👍👍👍
@mushy181002 жыл бұрын
Attention to detail! Thanks for the help. Got 08 Sienna couple of weeks ago for my brother in law and will drop it off to New Mexico from SoCal next month so this video really helps me what to buy and do on my own.
@oldgasjocky5 жыл бұрын
Bob: you have a way of articulating this process just right! My hats off to you and thanks for the time and effort to this rather simple process. I have a 2015 Sienna LE and I feel much more confident doing the deed. out of all the others, this one gets my thumbs up and a click to subscribe Don
@rubiconklbrutorowman75775 жыл бұрын
Well done Bob, I would do virtually the same as U do, as I did on my Corolla's. That is what I call TRUE quality oil change. VERY good job indeed! Ca, USA.
@rubiconklbrutorowman75774 жыл бұрын
THE BEST Sienna oil change ANY viewer SHOULD appreciate indeed! WITH Bob's permission, I would like to share few tips of my own in addition to rephrase, reminder never hurts anyone indeed (!), Bob's illutrations. FIRST OFF, {some oil WILL BE inside oil chamber n NEED some times to go down to oil engine pan, SO, U cannot really measure HOW MUCH oil is in oil pan n personally, I wait 20-30-minutes after warm up engine and then measure oil level!). WE MUST NOT forget "19.5-torque-4-MAIN-oil-HOUSING-assembly-N-9.5-torque-in-the-MIDDLE-part-of-main-oil-assemly-that is "CRITICALLY" important NOT to drip of oil come out OVER the 9k-10k miles depending conditions we drive! NOW, many of us, lots of people, FORGET to "loosen oil cap and oil dip stick way up IN ORDER TO LOOSEN or to REMOVE pressue inside of oil champer!! WE SHOULD MAKE SURE loosen oil inserting cap n oil dip stick PULL ON to remove pressure inside engine-chamber-N-via oil pan and WILL help "drain oil faster N better even common sense should tell U that"!! AND NOW, as it can be seen Bob's excellent demonstration, which I agree fully, "proper way" chaning Siennia oil change (or any of oil that is filter based), is to MAKING sure DRAIN middle oil filter-housing-by-loosening middle part of the MAIN oil housing assembly by using ratch N using 3/8 size wranch extention rod as Bob showed to us WHICH will make quite eaiser to loosen the MAIN-oil-assembly housing assembly due to "removing-the-most of pressure that has been build up inside of MAIN oil housing assembly that will come off much easier!" PLUS making sure 2-replace-{EVERY-TIME-SHOULD-indeed-), paper-gasket-every-time-(!)-to prevent oil leak is absolutly neceassary! APPLY clean oil rather than using dirty oil to lubriate two rubber oil gaskets (small N large) rings SHOULD be way 2-go!! WHY use dirty oil to lubriate rubber gaskets before inserting rubber gaskets to small-N-large-OIL-rubber-gaskets? USE clearn oil to lubricate seem common sense 2-me! Before reassembing or inserting the MAIN-OIL-ASSEMBLY-UNIT-2-make SURE wipe-out-all that dirty oil "residues-surrounding oil drain plug itself N around oil drain hole" BEFORE inserting back regular MAIN-oil-assembly-housing-N-of course even oil drain gasket area BEFORE retightening oil drain gasket with BRAND-NEW-PAPER-GASKET-(every time) OIL DRAIN 14-MM bolt. *Tip is using codeless ratch to loosen MOST of oil drain (I have cordless ratchers N I do as I said suggested here!), bolt BEFORE finally loosen to let out oil and size we all know is 14-mm (I have been told virtually ALL Toyota oil drain plug is 14-mm-that makes whole of sense from economic sense by seperate size to manefacture that takes extra machine cuts and all that rest?). So, comforting to know all Toyota drain plug size is 14-mm. *I have been using 14-mm-craftman-made-wrench-all-these-years-N-NEVER-rust (!)-I-found-the best-(cheap immitate one's do rust after a while-but NOT craftman wrench after all these years! Naturally I have NEVER been nor any friend works for Sears, before n now. SO, I personally recommend to get quality wrench made with quality metal LIKE Craftman-wrench or Sears partner LIKE Dodge's partner Cummins supply due to "lasting durability N quality N dependerability of Cumins, now Cummins engine maker does supply its bread n butter Cummin engine to Ford 550 Truck. I have just made another example to strengthing m point of LASTING dependerablity tool like Craftman tool-N-after all Craftman tool has life time warranty is for one thing but NEVER have to go Sears to replace cz the Craftma tool I have NEVER built up rust, except plastic part of digital tork wrench, not recommend that Craftman digital tork wrench but I do recommend either price Precision (I just purchased as sucker for tools!) and or more affortable LEVON TORK WRENCHES BOTH 3/8 N 1/2 N like very much I purchased BOTH aformentioend brand, again, LEXIVON tork wrenchs N FLIP LUG NUT 1/2 drive impact socket set as well. I am for one VERY GLAD that, thank got, Sears or Craftman still survive thanks to new Searrs owner who purchased Sears during chaper 13 bankrupicy who used to be Sears executive according the aritlce I have read on the article that is public fact indeed! This much I can share anyone care to read 4 one time. USA
@winstonreid50096 жыл бұрын
that was a good step by step teacher ,which seams very easy to follow . One more practicing lesson and I am on my way.
@dougwachs6 жыл бұрын
Finally!!! Someone who knows what he's talking about :-) Yay, thank you! I especially liked the details on torque wrench settings and how to reset the maintenance light... You are now my personal hero!
@PickyOne5 жыл бұрын
1:37 finally someone knows how to use the breather.
@Vfh........y5 жыл бұрын
I don't take the small cap off ever and don't use the Breather obviously. Just crack it and let it drain into your pan. When you're finished take $0.10 worth of carb cleaner and spray off the housing. Then you don't have to change that small seal and risk it leaking. Just my take on it.
@stevensevek61514 жыл бұрын
Breather? Oh, you mean the drain attachment for the oil filter housing.
@njsongwriter4 жыл бұрын
The instructions on the Toyota oil filter box calls it a "service pipe".
@kaleikaumaka70113 жыл бұрын
That’s what that’s for? Damn. What if I put the smaller washer inside the filter?... anyone know
@degenviking60684 жыл бұрын
man you changed the oil like a boss thanks!
@keithhastings40925 жыл бұрын
Nice video...you need a a 7th quart. Oil capacity is 6.4qts. I don’t know why Toyota did it that way but that’s what my ‘12 Sienna takes...major props on using a Toyota filter. Don’t use anything else. Same goes for spark plugs. Use oem. You don’t want to do that job twice...
@jackiemercer9474 жыл бұрын
This was video is the best I have seen. Very informative.
@ChrisWilliams-nu1sf4 жыл бұрын
Finally a person I can relate to. Great video.
@timjerome89424 жыл бұрын
Nice presentation Bob, thanks man!
@L35inColorado3 жыл бұрын
Excellent video, man -- thank you so much!
@techwaagegy4 жыл бұрын
Good pace for us noobs. Thanks for posting!
@MyLe-yt4ne6 жыл бұрын
wonderful video. a little time with all information how to do oil change diy. thank you for your video. it's good educated video.
@kingdavid20184 жыл бұрын
You didn't pre lube the filter?
@2871marti5 жыл бұрын
Nice video... hope to make more video like flashing brake fluids and coolant, tanks
@mannyacosta43562 жыл бұрын
Best video changing oil
@GypsyKing75 жыл бұрын
very well done beautiful Video i give it 98 Rotten Tomatoes
@rkwpark4 жыл бұрын
Nice diy funnel!
@thesoundpainterbkny34652 жыл бұрын
THANK YOU FOR THE POUNDAGE 19.5 AND 9.5. NO ONE ELSE GAVE BOTH POUNDAGES.
@TheWilferch2 жыл бұрын
The cap actually has 25 NM ( Newton-Meters) printed on it.....translates to 18.5 ft/lbs.
@juniali1233 жыл бұрын
Would be better if you also mention where you got the seals and do you have to replaced every oil changed.
@BigAlWillis4 жыл бұрын
where did you get the oil filter wrench? nice vid , thumbs up
@rubiconklbrutorowman75774 жыл бұрын
U can get from Sears or Craftman or Amazon or Walt mart every where or price Toyota dealer, but paper oil drain gasket SHOULD get OEM, I just go Toyota dealer NOT to take chance on online sometimes, lots of times, different than what I saw on computer and return headache all that! Besides it is below two buck for one gasket n know U will have 100 percent OEM part!
@BigAlWillis4 жыл бұрын
@@rubiconklbrutorowman7577 bought a motivx mx 2321 strong well built, worked great. 5 star reviews
@BisdakAdventurer5 жыл бұрын
do you think it will work on my 2018 toyota siena base model? i tried the other videos how to reset but no luck. i just change the oil even though no maintenance light on the dash.
@njsongwriter4 жыл бұрын
I don't understand why you left it at least a ½ quart low?
@timbersflooringserviceswar49894 жыл бұрын
Thank you for this great video👍🏼 now off to buy the tools 👍🏼😘
@eliefrancis93563 жыл бұрын
Thank you for the video...I watched it after i changed oil...and they did a mistake for me...the small rubber thing they put it from the opposite side from where you put it...meaning they put the small rubber ring then the filter above...will that cause a problem? I can ignore it till the next time I change oil and filter?? Thank you
@mourningfamily12343 жыл бұрын
You showed that plastic piece popping in but mine had threads, screwed it in and drained just fine.
@daveg78785 ай бұрын
The breather at 1:40 is plastic and can get brittle in winter. If you search, several folks sell a $15 reusable metal tool to make this job a lot more pleasant.
@dansklrvids73034 жыл бұрын
Excellent video
@dannyyang39796 жыл бұрын
Dude you are showing how the secret done ;) nice video showing detail ;)
@nha24483 жыл бұрын
Could you please show good spot for lift the sienna Van by jack floors
@stevensevek61514 жыл бұрын
Is there really pressure inside an oil filter housing when the engine (& oil pump) is not running)? I don't think so.
@TheWilferch2 жыл бұрын
No...the smaller center cap just give you a chance to drain a small extra volume of oil without a big "glug" spilling out otherwise. It will spill anyway so you don't need to do the center cap stuff.
@RicardoSanchez-ev5bq4 жыл бұрын
Good video thanks
@vibgyor815 жыл бұрын
Excellent video, Please advise best oil, best oil filter, where did you bought the tools? I don’t have oil filter cover opener and torque wrench. I have sienna 2007, with 195100 miles. Please guide
@keithhastings40925 жыл бұрын
Khawar Syed Mobil 1 in the weight prescribed for your van. Toyota oil filter, can be had for $6 at the dealer but I order mine online for about the same price. The tool can be found all over amazon...
@diydave6435 жыл бұрын
I've been using Pennzoil Full Synthetic in our 2008 Sienna for years now and I've been more than pleased with it. The tools are readily available at auto shops or Toyota directly, although they are a bit higher. The Mobil 1 branded filter is made exceptionally well.
@stevensevek61514 жыл бұрын
I use the Motivx # 2320 oil filter cap wrench along with Super Tech 0W-20 full synthetic oil and either a K&N, OEM Toyota or Super Tech oil filter. I change mine every 5,000 miles. The adapter that comes with the Super Tech filter to drain the oil from the oil filter is threaded instead of snapping in. Some find that style easier to use and less messy.
@Dormdad092 жыл бұрын
Thanks, I like the better funnel trick
@gabriels39093 жыл бұрын
What about the safety clip? Was it not in the way?
@robertslegers2572 жыл бұрын
You did not show the oil filter cannister actually break loose with the ratchet. Did you have to get a breaker bar or impact wrench? These are commonly over torqued.
@TheWilferch2 жыл бұрын
CAUTION !!!...... the oil cap "tool" to take the cap off....has a center 3/8" recess for a 3/8 drive....AND it has a 24 or 27 mm hex around that. These are on SO TIGHT (regardless if done by Toyota or the oil-change monkeys), that if you use the smaller 3/8 drive to LOOSEN the cap, you can BREAK or STRIP OUT the cap !. USE THE 27mm HEX TO *LOOSEN* THE CAP, AND FEEL FREE TO USE THE 3/8 DRIVE TO *TIGHTEN* THE CAP. Not too much,....just 18 ft/lbs to tighten back on. Most oil change places make it TOO TIGHT !!!!!
@dhavalchokshi29102 ай бұрын
What is the filter removal tool ?
@bechirdesir21816 жыл бұрын
Great void, thanks Mr Bob
@andyroid50283 жыл бұрын
And also, a great video. 😉
@csun25335 жыл бұрын
Great Video
@marlo9163 жыл бұрын
You put 5w30? I thought it needs 0w20?
@mpankevich4 жыл бұрын
Thank you!
@laviebanale5 жыл бұрын
Hey, what tools are you using to get the oil filter housing out? Can you give me the size and name?
@ggeorge27635 жыл бұрын
lavie maintenant you can buy at any dealer or auto parts store, just ask for oil filter wrench for Toyota
@stevensevek61514 жыл бұрын
I recommend the Motivx # 2320. It is one of the more expensive available but has the best reviews on Amazon. Technically it does not remove the housing. It removes the oil filter cap assembly and is called an oil filter cap wrench.
@TheWilferch2 жыл бұрын
@@stevensevek6151 ....CAUTION !!!, especially if you use a cheaper tool...... the oil cap "tool" to take the cap off....has a center 3/8" recess for a 3/8 drive....AND it has a 24 or 27 mm hex around that. These are on SO TIGHT (regardless if done by Toyota or the oil-change monkeys), that if you use the smaller 3/8 drive to LOOSEN the cap, you can BREAK or STRIP OUT the cap !. USE THE 27mm HEX TO LOOSEN THE CAP, AND FEEL FREE TO USE THE 3/8 DRIVE TO TIGHTEN THE CAP. Not too much,....just 18 ft/lbs to tighten back on. Most oil change places make it TOO TIGHT !!!!!
@davidweber23084 жыл бұрын
Thanks.
@davidcastle654 жыл бұрын
I don't think it is spring loaded it's the o ring giving resistance
@ewayjeng13 жыл бұрын
Where can you get that plastic bleeder tool?
@michaelmcguinn99125 жыл бұрын
Awesome. Thanks
@kk0dj3 жыл бұрын
Good video. Thank you.
@tamtrinh79444 жыл бұрын
Thanks sir 👍👍👍
@zl1bandit6845 жыл бұрын
Where you get the gloves from? Amazing video man keep it up
@andyroid50283 жыл бұрын
Amazon, of course. Or sometimes, my family Doctor 'donates' to my DIY car stuff. Seriously, when I'm in there getting my yearly physical after he's done 'tossing my salad while I cough', I usually ask him for a few pair. He always gives me about 5 pair. LOL.
@zl1bandit6843 жыл бұрын
@@andyroid5028 completely forgot about this comment. I go to Costco bc of covid and quality.
@cyrium15 жыл бұрын
where do you get that special housing tool from?
@njsongwriter4 жыл бұрын
The one I like is here... www.amazon.com/dp/B00XTAGHU0/ref=sspa_dk_hqp_detail_aax_0?psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzVlZCV0tMOUhHQ0JMJmVuY3J5cHRlZElkPUEwODEzNjQ0MU4xTElaVjhISFJKUCZlbmNyeXB0ZWRBZElkPUEwNTQwMDE1MjFQWjRIR1lHOFZOUCZ3aWRnZXROYW1lPXNwX2hxcF9zaGFyZWQmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
@skideric4 жыл бұрын
Large Channel Locks wil work fine,if like me & can't afford to buy extra tools,when can get by without it...
@diydave6435 жыл бұрын
I was *literally* just getting ready to start editing down my video for a DIY oil job on a 2008 Sienna, but I'm not sure I'll bother. This is a clean, concise how-to and I'm not sure I could improve on it, although I've always loaded up 6 quarts first, not five, and leveled up from there. I can't stand that secondary oil breather on the filter cannister lid; I see zero point in it. The first time I tried to remove it separately, it just rotated the main cap off. I now just use the removal tool to rotate off the main cap, get ready for the extra glurb of oil, and call it good.
@patrickmurphy92665 жыл бұрын
Why dìd toyota not use a spin on filter .
@TheWilferch2 жыл бұрын
@@patrickmurphy9266......everyone is going to this stupid design. It's more "eco-friendly" by throwing out only the paper element, and not the metal can (too).
@nha24483 жыл бұрын
Thank you mr pham
@roadrunner7935 жыл бұрын
Hoq did you loosen that nut? mine is super tight I tried spraying it liquid wrench still doesn't come off.
@BobPham5 жыл бұрын
if its not leaking it should be fine. My old tundra was stuck on as well, i couldnt get it off. so i had to buy new cap from the dealer.
@stevensevek61514 жыл бұрын
That's what happens when they are over-torqued.
@TheWilferch2 жыл бұрын
CAUTION !!!...... the oil cap "tool" to take the cap off....has a center 3/8" recess for a 3/8 drive....AND it has a 24 or 27 mm hex around that. These are on SO TIGHT (regardless if done by Toyota or the oil-change monkeys), that if you use the smaller 3/8 drive to LOOSEN the cap, you can BREAK or STRIP OUT the cap !. USE THE 27mm HEX TO LOOSEN THE CAP, AND FEEL FREE TO USE THE 3/8 DRIVE TO TIGHTEN THE CAP. Not too much,....just 18 ft/lbs to tighten back on. Most oil change places make it TOO TIGHT !!!!!
@alexnguyen80255 жыл бұрын
you should put some oil into filter before you install the filter in, so when you start the engine the oil go to lubricate the engine right away, if you don't the oil will go to the filter first and the engine will be dry without oil to lubricate.
@davidgarcia012346 жыл бұрын
How do you change your spark plugs on a 2009 Sienna
@keithhastings40925 жыл бұрын
David Garcia four cylinder is easy, v6 not so much. There’s a good video for the v6 here on KZbin...just search for it...and go to Toyota for the plugs...
@LeftenantMalachi3 жыл бұрын
How do you remove the filter housing without that cap tool?
@TheWilferch2 жыл бұрын
You don't ...you need the tool. Don't break it....use the 27mm hex to rmove the cap....and feel free to use the 3/8 drive ( smaller, in the center) to tighten. If you try to loosen it with the 3/8, you can strip out the drive or break the tool, because these caps are often on TIGHT.
@megahq85574 жыл бұрын
Thank you A++++
@maximuskhann53183 жыл бұрын
Things would have been so, Easy if toyota had normal oil filter 🛢, One without rings and bare filter, Though video is good.
@SimonLiMD4 жыл бұрын
The oil plug torque is 40 N*m (408 kgf*cm, 30 ft.lbf).
@stevensevek61514 жыл бұрын
And... Oil filter cap torque: 25 (±5) N•m/18 (±3.5) ft lbs Oil filter drain plug torque: 13 N•m/10 ft lbs
@captainamericaamerica80902 жыл бұрын
NICE AND SNUG IS ALL YOU NEED
@carlman28423 жыл бұрын
Does anyone know why does Toyota use this type of oil filter instead of the spin-on canister type?
@TheWilferch2 жыл бұрын
Everyone is going to this stupid design. It's more "eco-friendly" by throwing out only the paper element, and not the metal can (too).
@TheWilferch2 жыл бұрын
That "proper" step by first spinning-off the center small portion of the oil cap...using the goofy drain valve, etc....all can be skipped. It's gonna be messy regardess....just drain via the normal drain opening a bit longer....and then just spin off the oil cap.....use nitrile gloves.....oil will spill but there is no "trapped air" to release....what you did the "proper" way just drains the extra bit of oil from the oil cap. If it was a spin-on filter......you'd be facing the same thing.....the filter having some amount of oil in it . Eliminates a step and another leak source by opening another area, needing another O-ring, etc...leave it alone. CAUTION !!!.... CAUTION !!!...... the oil cap "tool" to take the cap off....has a center 3/8" recess for a 3/8 drive....AND it has a 24 or 27 mm hex around that. These are on SO TIGHT (regardless if done by Toyota or the oil-change monkeys), that if you use the smaller 3/8 drive to LOOSEN the cap, you can BREAK or STRIP OUT the cap !. USE THE 27mm HEX TO LOOSEN THE CAP, AND FEEL FREE TO USE THE 3/8 DRIVE TO TIGHTEN THE CAP. Not too much,....just 18 ft/lbs to tighten back on. Most oil change places make it TOO TIGHT !!!!!
@squeaky614 жыл бұрын
Where do you get the breather and oil filter wrench?
@stevensevek61514 жыл бұрын
I know of no breather...?
@squeaky614 жыл бұрын
Did u not watch the video? He uses a breather to empty the oil filter housing first before removal
@stevensevek61514 жыл бұрын
@@squeaky61 It's simply a disposable plastic drain. Why do you call it a breather?
@squeaky614 жыл бұрын
Because the gentleman in the video did, he said it releases the vacuum in the housing and allows it to drain. Do u know where to get one, that was the original question
@stevensevek61514 жыл бұрын
@@squeaky61 There is oil in the housing. That hardly qualifies as a vacuum. The drain piece comes with a new oil filter.
@manuelvargas19684 жыл бұрын
mi camioneta no lubrica aceite motor sera la bomba
@mpabla5 жыл бұрын
Sienna takes 6.4 quarts of oil
@khoayeuha5 жыл бұрын
Use a 4 cup container. Convert the quart to liters or millimeters. Buy 2 5quarts jug. save the remaining one for next oil change.
@njsongwriter4 жыл бұрын
Yeah, I wonder why he didn't fill it?
@haleiwahi274 жыл бұрын
Personally, when I do an oil change, I make my first quart Marvels Mystery Oil (MMO) then add the remaining 4 quarts and then check my dipstick. MMO will give you up to 10k between oil changes.
@mandarintutoring3 жыл бұрын
学习了
@hermyherm3653 жыл бұрын
Bro I have the exact same tool but I broke that sum bitch trying to remove that cartridge wtf did I do wrong ? I was going the same direction and everything???
@TheWilferch2 жыл бұрын
CAUTION !!!...... the oil cap "tool" to take the cap off....has a center 3/8" recess for a 3/8 drive....AND it has a 24 or 27 mm hex around that. These are on SO TIGHT (regardless if done by Toyota or the oil-change monkeys), that if you use the smaller 3/8 drive to LOOSEN the cap, you can BREAK or STRIP OUT the cap !. USE THE 27mm HEX TO LOOSEN THE CAP, AND FEEL FREE TO USE THE 3/8 DRIVE TO TIGHTEN THE CAP. Not too much,....just 18 ft/lbs to tighten back on. Most oil change places make it TOO TIGHT !!!!!
@alisaleh25097 ай бұрын
This needs 6.5qts
@marshallhall91663 ай бұрын
I think your jeans inthe dryer are done lol
@peytonbloom41235 жыл бұрын
How unbelievably stupid. My audi doesn't even require a special tool to take the oil filter out what's the point of designing it this way?
@zl1bandit6845 жыл бұрын
Peyton Bloom lol cars are engineered differently, you can drive any Toyota straight off the factory line without changing the oil for the 10+ years and it will start and run however it won’t run smooth but you’ll get home. The Audi’s are very very finakey where you have to change it based on how you drive. Even if the car sits you still have to change that oil. The point is cars are different.
@jhonnymartinez8134 жыл бұрын
I forget that there's only one kind of car in this world!! Ur kind
@stevensevek61514 жыл бұрын
You don't know why?! Toyota was trying to do the right thing but it seems there are a lot of old dogs out there that can't be taught a new trick. Why Cartridge Filters kzbin.info/www/bejne/p3maaqh6h5eMfK8
@tjlee99012 жыл бұрын
its stupid to have to do all that . cant blame people for not doing it
@outoftime7884 жыл бұрын
u da dude dawg shit
@Geo_Schiss3 жыл бұрын
Thats what that stupid plastic thing is for.....thanks!!
@seniorlife_35915 жыл бұрын
What Toyota engineer decided to use this type of oil filter changing process? I prefer the spin on oil filter. Spin off old oil filter. Clean around oil filter area. Spin on new filter. Done in less than 1 minute. This process makes you remove a drain plug from the oil filter housing, insert the special plastic drain thingamajig, drain the oil from the housing, remove the thingamajig, get another tool to remove the housing, remove the dirty filter, remove the two O-rings, clean the housing, replace the two O-rings.....what a big Toyota joke!!!!! This is the only reason why I'm not buying a Toyota. Too many areas for an oil leak happening.
@transit19995 жыл бұрын
Fidel Damasco i know i hate the toyota design. Just today i was changing the oil and filter and ended up breaking the filter wrench where the socket wrench fits in. It was on so tight. Guessing the heat of the engine and the aluminum canister seized up. Never had an old style filter get so tight.
@stevensevek61514 жыл бұрын
And it all takes about five minutes more...!
@stevensevek61514 жыл бұрын
@@transit1999 And last time it was changed it was only put on at 18 ft.lbs. as instructed?
@stevensevek61514 жыл бұрын
@@transit1999 I thought of replacing my plastic one with aluminum but decided not to when I heard of the problems some folks were having with galling of aluminum screwed into aluminum.
@TheWilferch2 жыл бұрын
@@stevensevek6151 .....very little chance of that if you have any "feel" at all to assure your're not cross-threading...and with all that oil in the vicinity coating everything.
@keangfamily4 жыл бұрын
It’s just simple oil filter but Toyota makes it like rocket machine. Bye bye Toyota brands.
@stevensevek61514 жыл бұрын
Are you kidding? Sorry, it's not rocket science.
@TheWilferch2 жыл бұрын
All newer cars are going to this design....it's more "Eco" friendly by disposing only paper....not paper with a steel casing. Don't blame Toyota only.