Homemade track sled. Hope this video helps someone out with their build. If you have any questions, don’t hesitate to ask. You can reach me at: cuhlemann1@gmail.com
Пікірлер: 38
@laurakoehn1336 Жыл бұрын
Very cool ! 😊
@sliversandsparks Жыл бұрын
Nice work 👍
@lokirussell5891 Жыл бұрын
Cool !
@danarioso92638 ай бұрын
Thanks for the info! Im in the process of building my track sled.
@chaeuhlemann8 ай бұрын
Don’t over think it, very simple fabrication and gearing. I recommend going 8hp and a 40 series or larger torque converter though, for a bigger belt
@benjiang64937 ай бұрын
@@chaeuhlemannI am looking for knock off cvt converter. I see most comments are positive to 30 series, however 40 series maybe not easy to source good quality products. Do you have any recommendations for aftermarket 40 series? Thanks!
@chaeuhlemann7 ай бұрын
@@benjiang6493 I would definitely go with a bigger CVT than a 30 series, belts aren’t big enough to handle all that torque of a snowmobile track. Look at the Comet clutches, like a 500 series
@user-mr4fy7nn3o7 ай бұрын
Sweet
@natebissell7 ай бұрын
This makes me want to start ice fishing, so I have a reason to make a track sled...
@chaeuhlemann7 ай бұрын
Just make one and call it your homemade tank. They are pretty cool machines
@twt000 Жыл бұрын
Taryl Dactyl the famous YT'er is making one right now. Next episode on Sunday.
@MuskratOutdoors Жыл бұрын
Looks nice. I built one a couple of years ago for trapping. I love it! Fun to ride, but not very warm! Mine has too big of an engine, I went with a 14 horse. It has more power than it needs, but is top heavy and tips over too easy. A 6 1/2 horse would have been better.
@chaeuhlemann Жыл бұрын
I had watched your videos, thank you for your comment. The track sleds definitely have their purpose. It is a perfect machine for me where I live and for the purpose I use it. I can’t justify having a snowmobile. Love watching your videos, keep up the good work.
@alexvanepps95416 ай бұрын
Please send me a part lists and step by step instructions 🙏
@nathanmciver6496 Жыл бұрын
Correct, nope! Wise to think about weight! Lol :)
@larryw5429 Жыл бұрын
Why not just cut the bulk head off the snowmobile and use the back half and put a plate on top to mount your engine? To me you disassembled the part only to remake it lol! You could of attached the transmission to the jackshaft and all the work was done. Already a chaincase and gears and if you get a parts sled with reverse you can utilize that feature!
@chaeuhlemann Жыл бұрын
And you absolutely can. I like the look of the open frame better than the used snowmobile. And I like making things and wanted to do something different, so that’s what I did.
@garyhoefferle5098 Жыл бұрын
Did you use #40 chain on the whole build? Did you block out the suspension? What is you thoughts on the suspension as far as using it or not and how it affects traction ect?
@chaeuhlemann Жыл бұрын
Yes, used #40 chain for both sections. I did not lock out the suspension. Has great traction, lean it to the side to make sharp turns in the snow. I think suspension is not needed in these builds though since your not riding on it.
@coryhitchens8670 Жыл бұрын
You had mentioned that you built the second one because you had all the measurements and were able to fab it up in a couple hours, do you have the measurements to what you used? Diagram/Sketch of the layout?
@chaeuhlemann Жыл бұрын
Both builds were different frame size because the tracks were different. The length of the frame was just a little bigger than the track. Then the body mount brackets were spaced apart from the original measurement from the track on the sled. Each build was custom but super easy, that’s why second build went quicker. Not much to these track sleds
@Fullyautomaticmechanic7 ай бұрын
Where did you buy your chain sprockets, jack shaft and pillow bearings?
@chaeuhlemann7 ай бұрын
mdsofmi.com
@chaeuhlemann7 ай бұрын
Got the 1” shaft from a local metal stock supplier, cut my own 1/4” keyway with a cut off wheel. Everything else, chain, sprockets, bearings, ordered from mdsofmi.com
@samuelfrandsen89657 ай бұрын
Where did you get your sprockets and chains from? Also, what size of drive shaft did you end up using?
@chaeuhlemann7 ай бұрын
Mdsofmi.com
@chaeuhlemann7 ай бұрын
1” shaft
@curtiszabel9870 Жыл бұрын
What did you use to cover the front of frame by motor?
@chaeuhlemann Жыл бұрын
I used thin (16ga) sheet metal. I was going to put side panels on but they are not needed. Definitely need the underbelly, between track and motor covered.
@AGoutdoordad6 ай бұрын
how much was the total cost of a build?
@chaeuhlemann6 ай бұрын
If you can get a used track for under $200 and all the bogie wheels are good, we built one for $800, the other build was $1,100
@highseed69 Жыл бұрын
the cargo carrier is 100% illegal because it is blocking your license plate
@chaeuhlemann Жыл бұрын
I was pulled over by an officer, thought it was because of the plate being obstructed, but then the officer said he was just wanting to check out the Track-Sled!!!
@larryw5429 Жыл бұрын
Karen in the comments!! So does pulling a trailer block the plate lol and millions of people tow! The cops don't care as long as your not doing something illegal to get pulled over. But maybe you live in Commifornastan and can't help yourself!
@highseed69 Жыл бұрын
@@larryw5429first off trailers have their own plates. second it all depends on the cop weather they wanna charge u for plate obstruction which is illegal in canada and usa. third i don't care if their plate is blocked that their problem not mine, its called being nice because some forget or don't know all the laws.
@marktapey7678 Жыл бұрын
Now get ready to fill out paperwork and pay up to register it, they've changed the wording and are making us register in Colorado. Total BS.
@chaeuhlemann Жыл бұрын
So far in Indiana they are not having us register, but I can see it coming
@marktapey7678 Жыл бұрын
@Bin Godii Oh trust me I've put up a fight, this year they even changed the wording to cover just about everything with a motor or track. Next the green koolaid drinkers will be charging us a carbon tax. Leftards have ruined Colorado, the once great state I was born and raised has been turned into a SH,, hole! Have I registered it, "NOPE".