DIY TRUCK CAMPER / DODGE DAKOTA / PART 1

[@bobjarrard]

Welcome to the World of SixPac campers. They built using the same system. Good job. Bob

[@chusamusic1409]

The build and music! Tip top!!

[@robertcox2335]

The gloved hand under the plywood while sawing made me cringe…. But great video!

[@Airmanmx1]

Indeed

[@visamedic]

The difference between a clean cut and hamburger 😬

[@rogeralvarado6060]

Great job love your video and I never thought about insulation on the floor I thought about it on the walls and the ceiling and never the floors great job guys great job

[@TopQualityIronWorks]

I have a dodge Dakota 99 I use it for welding... Nice 👍🏼

[@becomingcannoy8242]

I just started my truck camping its so much fun.This video is big help in my future projects or up grade on my camper.

[@NovaSupernova]

Bud, never cut with your fingers on the underside of something. They will go missing. I've been a carpenter for over 40 years, trust me.

[@Nightwolf-zh4xk]

No u haven’t bro

[@Nightwolf-zh4xk]

Sussy baka

[@vargr]

I agree with @NovaSupernova, I watched a helper we had told a dozen times not to put his fingers under a board cut three off. When he came back to work he lasted till lunch before he was fired. Bossman had to work him half a day before he could fire him.

[@jefferyfowler5080]

The part I like, and attracted me the quickest, was how the (I don't know how to explain it well) the part that goes lateral just above the side of the truck bed: the walls. I like the fact that it was cantilevered, with two uprights per side. That makes me think it's a lot stronger than everybody else's type of build. And won't shake apart as bad going down the road. I have drawn up plans for at least three or four different slide-in campers. I've yet to build one. I did turn a huge school bus into a motorhome, with my father's help. And he and I built an RV from a step van. I currently live in a sleeping room. I don't have access to a place to work on such a project, or I would build one for my pickup truck. There's another build on here, that also is by a father-son team. My favorite part of that slide-in camper is the top-hinged, rear, half-size door. "Truck home Switzerland" (all one word) is the name. I thank you for the some good videos.

[@visamedic]

Yeah. I’ve been wanting to do this for my 83’ F350. I can’t justify carrying that load on the front and back walls. I think I’m going to go this route, and just set up those air gaps for storage.

[@visamedic]

And this is “TRUCKHOMESWITZERLAND”

[@jefferyfowler5080]

@@visamedic Thank you for the reply. I'm afraid I'm not going to be very enthusiastic on the subject right now, due to my wife's health taking a bad turn, and having to deal with that.

[@patrickmckowen2999]

Right away I new it was not Canada -- we cant find straight lumber 😂 The 2nd clue it was not North America - metric! Canada is metric but we still do alot of building in Imperial. 3rd clue it was European - torq head screws - nice, but no one using them here that Ive seen. Looking good - I would have glued and screwed! Looking forward to next vid 😁 Cheers

[@TruckHomeSwitzerland]

😂😂👍

[@roundsm18]

There’s loads of torx screws in the US. Many decking screws are. Irony also lots of trades even in Europe are done in imperial measure.

[@AdventuraHighway31]

@@roundsm18 No not really 😏

[@carmenperalta7207]

Aswesome ! Love to see creativity become a true genuine and unique reality in the making of camper shell ..let, your mind guide your own sweet ideas..great work !!

[@mundodebandeirante]

very good your videos. I'm building a camper and the information is very important.

[@buck9739]

Very clean

[@jlmraney2562]

What has surprised me is only using screws? I've built a lot of projects in my life including boats and always used screws and glue. Screws come loose.....

[@ashleymille2193]

Put a nail in 2 2x4's n pull em apart then try the same wit a board screwed

[@marcusmarrs]

Yes and drilling directly into the end grain instead of a pocket hole style entering in an angle

[@falkenvir]

nice foam lining on the bottom, i would assume thats for insulation

[@TruckHomeSwitzerland]

Yes the floor is 2cm armacell, all the rest is done with 4cm armacell. So this thing in insulated really good. Lots of people using armacell for their van builds in europe

[@mikesniedze9122]

Sweet! I’m making a truck camper my self … so far a 20 part video series lol… still lots to come … nice build

[@puremetrix]

It would be much better if the loud rock music was turned down and more voice explaining the build

[@Wanderinghealer]

I just build A diy camper. I forgot to think about got to secure it to the bed!!! How does your secure yours?? I need advice?

[@denniscarreno8151]

Well made!

[@warrenbenton9033]

Did you use non treated ply? Any advantages in using treated ply like a H3.2?

[@tytraulich4987]

I have a 99’ 45” between the wheel wells. It’s older so I wanna cut the wheel wells back an inch on both sides so I can fit a ready made camper. 6.5’ bed. Idk if all truck campers are 8’ or 6.5’ Gutted they weigh around 800-1100 lbs.

[@TruckHomeSwitzerland]

Yes be careful not putting a too heavy cabin in the back.. Build a camper yourself or might get some sort of gofast camper set up (much lighter).

[@liteazwell1913]

Good tune. Justin Johnson?

[@ATumblelinaTruth7777]

Beautiful

Hi, ein super Projekt. Mit deinen Videos als Vorlage traue ich mir den Selbstbsu jetzt auch zu 👍 Eine Frage noch was für ein Holz hast du benutzt und welche größe / Maße haben die Latten. Bei welchem Herstellern hast du die Fenster gefunden?

[@TruckHomeSwitzerland]

Hallo, danke erstmal :) das freut mich natürlich zu hören. Ich wünsche dir schonmal viel erfolg bei deinem vorhaben. Aussenplatten sind 8mm albasia sperrholz, die rahmenkonstruktion besteht aus 4×4cm fichten kantholz. Die längsträger sind als einizige 4×6cm. Die fenster alle bestellt bei campingwagner.de hersteller carbest..

[@giuseppevillella9445]

Ottimo lavoro bravo 👏👍🎞

[@ericneering6357]

Been watching a lot of videos on how to build your own truck bed camper I think people are missing something why not start with a ladder rack and build off of that and then you got the whole bed of the truck for space

[@shawnhenderson1130]

There are so many reasons that wouldn't work as well. Insulation being number one

[@jimgersky]

well if i ever need to be reminded on how to saw wood. i know where to go,

[@tonymccoy5032]

Why the 350 blocks? Just curious

[@leogant2793]

Not sure why you’re not glueing it also?

[@user-leonid1985]

Доброго времени суток! Я из России звать меня Леонид. Понравилась ваша работа!!! Подскажите сколько весом получился кемпинг. Магу ли я сделать такой же на авто прицеп???

[@kameailliams1440]

Did you frame with 2x2’s or 2x1’s?

[@patrick35400]

Don't use Pu or SIKA ? Already heavyweight! Woods not traded against moistures etc.

[@jimmysavo8829]

Nice job, to me using glue give more structural rigidity

[@TruckHomeSwitzerland]

yes you're right.. we used glue for the walls and roof

[@campgoerOne]

Is this the 6' Dakota bed your building? How can I get your prototype?

[@guviso]

bien...........................hermoso.

[@robertvanausdall6772]

Awesome build!! Considering doing one myself, do you by chance have rough lumber list and or total cost

[@joewoodchuck3824]

Just do a sketch and add up the plywood needs. Each piece will have a typical number of support pieces. If you have a certain area to cover with sheets you know you'll have maybe another 20% in frame cost as an example. As for a lumber list, you'll need to stop the video whenever you see something else to add. Another method I use is to build a model with cardboard or foam board, and include all pieces that you would use to build the real one. Hobby shops sell all sorts of miniature lumber. My current favorite is hobby lobby.

[@airmen1103]

Moin, eine Frage zum TÜV, gilt der Aufbau als " Ladung " und wie weit darf er hinten überstehen? Ich will bei meinem Ranger die Ladeklappe mitbenutzen

[@TruckHomeSwitzerland]

Ja, gilt als ladung und muss in der schweiz nicht eingetragen werden. Soviel ich weiss darfst du hinten mind 1m überstehen sofern du deine rücklichter nicht blockierst, dh. der überstehende bereich sollte nicht viel breiter sein wie deine bodenbreite zwischen den radkasten..

[@airmen1103]

@@TruckHomeSwitzerland Vielen Dank für die Prompte Antwort

[@airmen1103]

Nachtrag, jetzt muss ich nur noch herausfinden, wie du die Verstärkungen für die Zurrpunkte n der Struktur der Kabine verankert hast. Ich habe bei mir noch etwas Bedenken bezüglich der Windlast unter dem Kabinenüberbau ( Alkoven)

[@TruckHomeSwitzerland]

@@airmen1103 als zurrpunkt habe ich gewindestangen, aussen ist der o-ring, innen gekontert mit einer kleinen metallplatte + mutter. Auf der ladefläche dasselbe jedoch mit einer grösseren konterplatte. Die originalen zurrpunkte vom pickup würde ich dir eher nicht zur kabinenbefestigung empfehlen.

[@철마-i6u]

좋은 것 배웁니다

[@barbarabrown5709]

Like the video it would be nice to have you comment on what you are doing instead of the music

[@piercerich9]

How do you like american trucks?

[@TruckHomeSwitzerland]

My first truck was a quad cab dodge dakota in canada, since then i have never owned a non american car. So yes i really like the american style and power for sure. My next truck/camper project will be a dodge ram i think :)

[@chrisstaylor8377]

no glue //?

[@themilkman3537]

Using 2x2 for the studs?

[@jimmieburnett8543]

Should have used 2 by 4 .

[@daviddrury3581]

What is the thickness of wood please

[@TruckHomeSwitzerland]

The sidewalls are 8mm, the main structure 4×4cm and 4×6cm

[@marcioolionimoraes2698]

belo projeto sou brasileiro estou fazendo algo parecido so e para colocar em uma clássica pickupi 1975 esta sendo preparada restaurada para viajar brasil a fora,,,poderia me falar que tipo de madeira e esta que esta usando para fazer a estrutura do camper abração e boa sorte!!!

[@denden760]

Way too much electric guitar. Too many close ups of cutting, drilling etc instead of showing the overall build. I couldn't figure out where you were in the build.

[@3dvorator]

4:07 , do you really consider that, the best spot to put your left hand?

[@barbarabrown5709]

I would not wear gloves when sawing blade could snag it and grab your hand

[@jebert327]

Glue???

[@norbertogarcia9963]

Hola muy bueno el vídeo pero sería MEJOR que lo traduscan en Castellano y pondríamos entender mejor ....TRADUSCAN TRADUSCAN

[@nashaunglave3025]

Hi

[@davidfoulkes9627]

The music is unbearable. Otherwise it's very interesting.

[@intexas9434]

Dude needs to learn how to snap a line.

[@angelah1622]

Next time please lower the music 🎶 please

[@robertduchaine2553]

Proper

[@denden760]

Confusing to the point of distraction! Jumping from a cut or measure every few seconds might be good for teenagers with empty heads but definitely NOT the way to make things coherent!

[@kotkotow6492]

Диз нечего не показал ! или показал чтоб не поняли !

[@bobmoss4016]

Music is utterly annoying....WHY?>?

[@ruslainirusli7257]

P

[@alancall5113]

the music is so annoying

[@xpabz]

Thumbs down for background music.

[@monserratfelix672]

I cant watch this to many mistakes.

[@guybrock837]

I gave the video a thumbs down,...because of the music,...could have done without it.

[@brianandlynphilippines]

God loves a nice person.

[@deathtooglobalists6891]

I didn't like watching him cut the plywood with his hands under the wood not smart. And I wonder how he is going to stop the rain from damaging the wood that will fall down the tail gate and cab. He has over hang on the sides of the bed but not front or back.

[@denniswilkins4514]

Your Rock And Roll ruined the video. If I want go to a concert I will.