I was having a spot of trouble tuning the YZ85 so I cobbled together a leakdown tester to check for leaks. (Found a couple) Tees & Stickers: teespring.com/... Music Outro Retnik Beats: (www.youtube/c/...)
Пікірлер: 14
@stevenn84493 жыл бұрын
Simplest tutorial I've seen yet. No over-complicated setup, just a few bits and pieces and you've got a functional leak down tester for not much money. Thanks for the great info!
@GarageAddiction3 жыл бұрын
Glad you liked it!
@kerryyeroyan8212Ай бұрын
Good job on the video and way to be creative. One bit of advice, if you keep your thread tape on the roll instead of tearing it off and roll it in the opposite direction that you did, it won’t have a tendency to unwind when putting fitting’s together!
@ashbridgeprojects69163 жыл бұрын
Shopping list: FYI, the exhaust plug is called a "drain test plug" mine was 40mm or 1.5".
@AutoBeta2T Жыл бұрын
Just what I was looking for - thank you.
@JWhit-bb3nu3 жыл бұрын
Very helpful video. Thank you!
@GarageAddiction3 жыл бұрын
Glad it was useful!
@AndrewBoundy3 жыл бұрын
Excellent. I have seen a few homemade ones - yours is very elegant in its simplicity. The fitting with the Schrader vve on it is absolutely perfect as was the plug (40 and 50mm) - I found all on Amazon. The $270 kit from MP will thus be built for $21 plus a PVC male to plain nipple (with a bush for different applications). More channel genius - thanks again! I'll look for a bulb type inflator (bit less aggressive) and a stethoscope (both from a blood pressure cheapo kit on amazon) to complete my system - the box will cost more :-)
@GarageAddiction3 жыл бұрын
Glad it helped! I've used it on a few builds so far with just a little electrical tape adjustments for boots
@thomasmoonan7040 Жыл бұрын
What did you search for to find the fitting with the Schrader valve and pressure gauge?
@swonn94352 ай бұрын
anyone got tips for plugging the exhuast on a kx250? exhaust port is larger and no plugs to plug it
@GarageAddiction2 ай бұрын
On my cr85 I picked up one of these in a 1 inch. Not sure how big the 250 exhaust is but you might find something. amzn.to/3VVPoW4
@killerballs Жыл бұрын
Did you ever get bike tuned right?
@GarageAddiction Жыл бұрын
I did! Funny enough it was the gearing followed by some high temp hose melting between the expansion chamber and the stinger choking the engine out