DIY USB OTG Cable

[@IONHowTo]

Amazon: OTG rex.red/otg-cable * USB Adapter kit rex.red/usb-adapter-kit * Heat shrink rex.red/heat-shrink-set * Female to Female adapter rex.red/usb-female-to-female-adapter * Female to Male rex.red/usb-female-to-male-adapter * USB to USB-C rex.red/usb-to-usb-c-male-adapter * USB-C to USB rex.red/usb-c-to-usb-adapter * Micro USB to USB-C rex.red/micro-usb-to-usb-c-adapter * As an Amazon Associate I earn from qualifying purchases. Affiliate links are marked with a star. *

[@jassen22]

Thankyou for this video. I make my own OTG Cable prettyeasily pretty cool... and it's working..

[@Beyondhumanlimits1]

Se vede ca esti roman frate. Doar un roman putea sa faca un video asa de bine explicat, no bullshit. Felicitari.

[@pierpa_76pierpaolo]

I need these connectors: USB A ---------------> USB MINI B. But I can't find the mini B ........ . Now I start from USB A and then solder the various wires directly to the existing connector of my Arduino Nano\Uno. And I solve like this. I can't wait to get started but first I have to get some materials. :)

[@IONHowTo]

The mini usb is not easy to find but some shops might still have USB cables how you need it. You could cut the cable and make it how you need it. Enjoy the tinkering!

[@pierpa_76pierpaolo]

@@IONHowTo 👍

[@benjaminsprint441]

Very nice 👍. Sir am subscribing because u used English in the video and I like that

[@imikegaming2070]

So what I would like to build is a way to have my android phone plugged into a keyboard and mouse as well as charge if possible. Is there a cord in exstiance like this or could you show me how to make one? Thank you so much btw Appreciate your time

[@IONHowTo]

Not sure if it works but try a powered usb hub and use a type-a to usbc or microusb

[@imikegaming2070]

@@IONHowTo thank you bro been on Ebay for last hour or so looking found me a 4 slot hub for under 5$ USC. On one of the slots could I add a usb to hdmi adapter and also plug it into my TV or monitor aswell? Or would it not read?

[@imikegaming2070]

Tanbin 4 in 1 Micro USB HUB Adaptor with Power Powered,Charging Charge OTG Host Cable Cord Adapter Connector for Android Smart Phone Tablet Samsung Galaxy S3 S4 S5 Note 2 3 4 Edge HTC One M7 M8 Desire www.amazon.com/dp/B06XD73SCH/ref=cm_sw_r_cp_apa_i_iRWsEbQ0VVZC5

[@IONHowTo]

If the phone supports hdmi out thru usb(c) maybe, have no idea if it would work

[@iamHuman389]

Finally!! Thanks man!

[@paulmanhart4481]

Hi. I like your video. But I don’t know where to get those parts. I have a rpm sensor with three fine wires. Two for dc power and one for signal. I want to connect them to my control box with some panel mounted connector. I was thinking of using a USB. What can you recommend? Thanks, Paul

[@CHARLIE.SKITCHEN]

Hi i have some dought on otg cable can u help me

[@e99g]

Really cool :) And could you also try to make a iphone lightning cable to charge?

[@Adam-xr6fj]

The 100k resistor could go between pin 4 and 5, or it could be left out as shown in the video.

[@IONHowTo]

There are different modes and the resistor sets those. Simplest is without any resistor just a wire.

[@davey2k12]

​@@IONHowTowithout resistor and usb power it will not charge Found Samsung tab a 2016 works with 82k on id pin

[@lizyaj5805]

I like your style buddy.

[@BAK87]

Thanks for sharing. Good vid. cheers

[@IONHowTo]

Thank you for the nice comment! 👻

[@Juniorfinger999]

Please layout diagram

[@zoemeow7677]

Unbelievable you did it amazing 🎇🎆🎉🎊💞💖💖💖💖

[@-mose191]

Can I have a question?... Is it ok without the resistor?

[@IONHowTo]

Yes, I used it without a resistor, just a wire. It depends on the phone. The resistor or wire sets different OTG modes. Many phones will work fine with a wire. Some are more picky. It won't damage anything worst that could happen is not to work. Be careful with +5v and GND. Don't reverse those.

[@-mose191]

@@IONHowTo Thank you!

[@Tech_481]

Can wait for the new video

[@felixbaum2180]

thanks man!!

[@jamesallen6007]

Thanks.😷🇬🇧

[@anyonecanmakeit718]

Does it work really?

[@Tech_481]

Nice video love it

[@DhanjitMr]

Sir Can u help me out otg for iPad...

[@technicalas8335]

How to Make a micro usb female to usb male Connector adapter

[@jamesallen6007]

Thanks.🇬🇧👍

[@radon5120]

I have not 4 pin . IM only have 1 2 3 5 pins

[@niezzyss684]

Wow chiar e tare

[@zoubawnatiti9338]

❤

[@hertddhgccb6662]

😍🤩😘🥰👍👍👍👍

[@manabendrasarkar5226]

Nice

[@IONHowTo]

Nice

[@aliismail8419]

هنا كيف يمكنني أن أوصل تفريعة ثانية للشحن

[@niezzyss684]

Speak enghlish :)) he is FROM Romania