If u have any Victron device,than u need an adaptor to connect to him.You can buy it or u can Diy it.I have to thank Viorel C for inspiring me.U have to buy JST 2.0 PH conector with 4 pins and USB to RS232 TTL PL2303HX adapter.
Пікірлер: 37
@nabarnes2 жыл бұрын
Thank you for the video - clear and simple and exactly what I needed to see (and your English is much much better than my Romanian!). Thank you again.
@diymariuselectro2 жыл бұрын
tnx man for your aprreciation.I hope that u can find other interesting things on my chanel
@sorinnicolau65842 жыл бұрын
Bravo...ffff importanta iformatia..
@diymariuselectro2 жыл бұрын
multumesc si eu pt apreciere.sper ca ai dat si like pt ca asta ajuta canalul sa creasca :)
@mindless44262 жыл бұрын
very relaxing, prietene!
@diymariuselectro2 жыл бұрын
Unii prieteni imi spun ca se uita seara la clipurile mele ca sa adoarma mai usor :)
@mrki4937 Жыл бұрын
If you would add the red cable, could you then connect a standard USB-Bluetooth dongle in order to connect your phone wirelessly?
@diymariuselectro Жыл бұрын
I bet this is not that simple and is not working.someone should reverse engineer original ve BT interface
@tonyhsu32692 жыл бұрын
Thank you for sharing. Can you please provide links for where you got the parts from?
@diymariuselectro2 жыл бұрын
i dont have the links anymore,but u have the name and un can find it in your area.
@luisdemoraisecastrosimaole3802 жыл бұрын
Hi, thank you for your vídeo, can you tell me if I can connect with USBC for Victron APP use, instead PC? What will be the pinout? Thanks!!!
@diymariuselectro2 жыл бұрын
I used this device with Usb-microUsb adapter on my old phone and works fine,and I am sure that it works also with Usb-UsbC adapteron my new phone. But I dont know the pinout, I will search and I will make P2 of this video if its working.Tnx for idea.
@b67fstb Жыл бұрын
Those are PH plugs w 2.0 terminals , I believe.
@diymariuselectro Жыл бұрын
yes u r right.I will edit now the description of the video.tnx. JST 2.0 PH
@Dave-jj9gf2 ай бұрын
1) +5V (red) in TTL PL2303HX not connecting to PIN? 2) Will the cable work with VenusOS (Raspberry Pi3+)? thanks 👍🙏
@diymariuselectro2 ай бұрын
1) not conected 2) I dont know bro u can try.
@Dave-jj9gf2 ай бұрын
working 🙏@@diymariuselectro
@AsifFareedch Жыл бұрын
Hi Nice to see your all videos. I have a problem just thinking that you might be able to solve it. I have Victron MPPT charge controller 75/10. It does not have built in bluetooth. I have succeeded to use the victronConnect S/W by using pl2303(USB to TTL) module through PC and and Android Mobile using OTG. The S/W runs smoothly without any problem. Now i just want to use VictronConnect Software with bluetooth module e.g HC05 or anyone like that. I have tried many times but got no results. How can i get the results ? please suggest if you have some idea in your mind.
@diymariuselectro Жыл бұрын
I also have in mind this idea to build diy VE direct bluetooth device,but is not as simple as it seems.Its a lot of protocols and setings to do.U have to reverse an original one to clone it.
@diymariuselectro Жыл бұрын
now I dont receive money for this chanel,I dot only for passion from 2 years.but if 3 good people donate money for this project,I can buy an original and try to clone it.
@TEKENGLOBAL Жыл бұрын
There are no links for any of the product or resources in your description???
@diymariuselectro Жыл бұрын
I didnt receive sponsorship.u have name to find it on internet.
@TEKENGLOBAL Жыл бұрын
@@diymariuselectro - You said in your video all of the links to the parts and where you purchased them would be in the description below. They obviously aren't listed in the description so you should really edit the video to say everyone will need to figure it out themselves. I don't understand how a video being sponsored has any relevance in helping out the community?!?
@diymariuselectro Жыл бұрын
@@TEKENGLOBAL my chanel is now small and seller doesnt give afiliate marketing link.If u want to help the chanel grow u can subscribe and share.you will find the names of parts in description and u can find for youself.
@AsifFareedch Жыл бұрын
Hi, it is very informative. how can we wire to rj45 connector. My Bt device is not working please give me solution to rj45 connection
@diymariuselectro Жыл бұрын
I cant help u because I dont know what are u talking about,pls give some details.
@AsifFareedch Жыл бұрын
@@diymariuselectro I have victron charge controller and my bluetooth device has been damaged. Now i want to connect my Victron charge controller to my computer through USB or LAN(RJ45). Is there any way to make a wire ?
@diymariuselectro Жыл бұрын
@@AsifFareedch you can make this cable for usb and will work.
@inmodreal97703 жыл бұрын
This this this some this this this aaaand this.
@diymariuselectro2 жыл бұрын
i dont know every word in english ,and I try to keep it simple so everyone can understand.tnx
@NigelM18 Жыл бұрын
These cables not so good idea. They no isolated cables and have ground loop issues.
@diymariuselectro Жыл бұрын
Mine is working perfect.
@constantinvacariu83272 жыл бұрын
Nu vinzi un exemplar ?
@diymariuselectro2 жыл бұрын
Scrieti un mail cu un nr si ne intelegem.
@constantinvacariu83272 жыл бұрын
@@diymariuselectro îmi puteți da o adresă de email ?