Wrapping this carbon roof spoiler as an alternative to repainting. Its seen better days so I figured why not. Don’t forget to Like, Comment and Subscribe!
Пікірлер: 59
@NDBBDB8 жыл бұрын
Nice vid mate, showing the difficulties you can be faced with when wrapping. Cheers man.
@aldo.z34854 жыл бұрын
Chinese vinyl? Or a brand one?
@olgapilarinos53905 жыл бұрын
what brand is that wrap and where did you get it from ?
@Desmolders5 жыл бұрын
Nice job for a rookie
@andisadler28974 жыл бұрын
How much for wrapping bud? from where? I have a Irmscher spoiler i want doing.
@MrMickyama8 жыл бұрын
what carbonfiber vinyl do you use? 3d,4d or 5d? Great job btw!
@KantstandlamGarage8 жыл бұрын
Micky Ama I used 5D carbon fiber
@Wildstyle_aus7 жыл бұрын
Whats stopping you from polishing the CF rather than wrapping it?
@JustinAbroad4 жыл бұрын
Sun destroys carbon fiber. It will start yellowing if you drive alot or if it's not garage kept
@Dragon-Slay3r Жыл бұрын
@@JustinAbroad what in the lungs? You leave me breathless
@youngflyfella3 жыл бұрын
What Drake song is that In the back ground music?
@onedegreewest93032 ай бұрын
one of these video that's harder to do than it looks..
@rin45209 ай бұрын
hi is it okay to wrap without using the heat gun thing
@perryh.53067 жыл бұрын
The Thicker the Material....Sometimes,....the easier to work with....With a heat gun...Not a blow Dryer! This Piece....I can do in 30 Mins With a Thick Wrap....15 with a thin. NO Heat Applied. Any Piece Off the car.....U shouldn't have to add heat...Stretch and pull/! But NEVER Use a Blow Dryer with Vinyl.....UNLESS your DIY
@laurencefeby5 жыл бұрын
Nice job!! Just curious wouldnt it be easier to wet sand and buff the piece?
@KantstandlamGarage5 жыл бұрын
Yeah possibly. but i just wanted to wrap the spoiler for fun
@bryanhsisjebe70114 жыл бұрын
Hey brotha I know this video is kinda old but do you know if I can do my spoiler in 6d cf vinyl
@Cjrelectrical7 жыл бұрын
Cool nice one going to do my Honda spoiler 👍🏻
@realtywithseankemp97047 жыл бұрын
I REALLY LIKE HOW VOLK TRIED TO CHARGE ME $4500 FOR THIER WHEELS BUT THEN VIVID RACING SAID $2800 BAHAHAHHAHAHAHAHAH!!! WHAT THE FUCK?!
@BoredAsUsual46754 жыл бұрын
My parents woulda executed me for sprayin that adhesive remover like that with no towel under 😭
@rstezza7 жыл бұрын
What vinyl is that? 3m 1080 5D gloss carbon??
@realtywithseankemp97047 жыл бұрын
Hey man if you are interested RWCarbon has some really nice and affordable cf parts. Not frp base with cf wrap either its all carbon fiber. They have everything well kind of lol.
@XBrandonLeeX7658 жыл бұрын
I'll definitely wait. I'm in no hurry, just did the 60k service. Fun funds are exhausted! I'm in Miami and the Heat/humidity is putting a beating on the paint.
@little__cezz87633 жыл бұрын
Where did you get that wrap
@TheBolebard6 жыл бұрын
How much is that size and where to buy? Thanks
@realtywithseankemp97047 жыл бұрын
You should watch the video of wrap master where he does a hood on a blue audi in front of an audience. He is insanely good but also gives a great tutorial . I belive he is the one that started wrapping academy or something like that
@notfromhere61258 жыл бұрын
Great wrap job. However roof spoilers will negate your rear spoiler airflow. IsFs need down force on their rear for high speed stability. Do you have a stock rear spoiler or larger?
@KantstandlamGarage8 жыл бұрын
Thats good to know! I have stock but i plan to upgrade to a taller Trunk spoiler
@notfromhere61258 жыл бұрын
After doing a fair amount of research, I think a good downforce set up would be 1. a front lip with a smooth transition to the underbody that goes about 1.5-2 feet length back ie. the skid plate. 2. A rear diffuser that actually is functional. ie. the angle allows air to slope up and out so the airstream does not detach as opposed to sharp angles like toms. Toms is for show only. 3. A duck bill spoiler approx 4-6 inches length back. 4.possibly side skirts but it depends. More research needed. Im not an Engineer but i am a new isf owner and im pretty good at learning the quirks of specific cars then finding out how to minimize the problem areas.
@Legends3 ай бұрын
@notfromhere6125 so all that you listed is that everything that you're running on your ISF now?
@theVRpilot6 жыл бұрын
Great videos brother. Im wrapping my lexus Ct200h, learning a lot from you.
@XBrandonLeeX7658 жыл бұрын
Keep the videos coming brother! There getting better and better! I appreciate what you do for the F community. Question, my trunk spoiler on my '11 Obsidian is hazing up pretty bad. I want to wrap it, but don't want to remove it. I don't want the clips to break. Can I wrap it with the spoiler installed?
@KantstandlamGarage8 жыл бұрын
Thanks for the feedback!! Mines is also faded pretty badly and I was considering wrapping it. Ive seen someone did it on the forums but based off my experience and the nature of the thick carbon vinyl, it may be difficult to do to be honest. Im sure you’ll get by if you do it yourself. Just a matter of tucking the vinyl away in-between the spoiler and trunk. Look into vinyl primer from 3m. Ill make a video on that as well actually. Maybe if you wait, ill wrap my trunk spoiler.
@drazenveselic29022 жыл бұрын
so easy,,in one piece,,do it
@gloelizabeth55356 жыл бұрын
5:35 Did you overlay the edges as if you were wrapping a corner on a box?? If you get what I mean.
@billyguther79677 жыл бұрын
Hi, where did you buy this vinyl wrap? and how much? i see a lot on ebay but theyre not as glossy as this
@paullyriseabove5 жыл бұрын
Great video. Nice work!
@natet537 жыл бұрын
More Lexus MODDDDDDDDDDDDDS. Someone in your squad should get a 3rd gen IS =D
@robynmcquiston83747 жыл бұрын
how long did the wrap last?
@theruggednorth4 жыл бұрын
Beautiful work! Where did you get your roof spoiler?
@xDiloveyouu8 жыл бұрын
Awesome videos, love your car. How is the fitment of the roof spoiler on your back window? I bought a carbon fiber one off ebay for my is350 but the fitment seems terribly warped and never laid flat on all sides on the window. 3M tape holds it pretty well, but one side is starting to lift after a couple weeks already due to warp. Wondering if they're all like this or should i try buying a different one?
@KantstandlamGarage8 жыл бұрын
Yeah I had to add 2 layers of tape on the sides, but left the middle on the spoiler with 1 layer. its holding pretty well so far since my last video. I think the replica ones are like this..
@BoredAsUsual46754 жыл бұрын
Flawless results
@miguelvillalobos47187 жыл бұрын
What size is your vinyl
@jzxwood4 жыл бұрын
Looks Perfect man! Thanks for good tips!
@cops20087 жыл бұрын
what brand is this ? looks great
@rudy11thegreat6 жыл бұрын
Can u share the link of this vinyl
@jonathanmelendez16693 жыл бұрын
Send link to wrap
@KantstandlamGarage3 жыл бұрын
This is an old video so I can no longer source the original one. Maybe try “5d carbon fiber vinyl”
@jonathanmelendez16693 жыл бұрын
@@KantstandlamGarage thank you so much, I found one on Amazon is that where you got yours?
@josepatino3228 жыл бұрын
good work man
@Pitchpullin57 жыл бұрын
@ 2:25. Sucks you got dirt under your vinyl. Good video!
@NC-rw8fi6 жыл бұрын
Ray E good eye
@Pitchpullin56 жыл бұрын
How is your vinyl holding up? I will be wrapping my spoiler soon
@NC-rw8fi6 жыл бұрын
Ray E this isn't my video I have however wrapped mine and its held up great use a heat gun though for the corners etc