DIY Winter Face Mask

These are videos related to the manufacture and testing of masks.
Protective mask testing: • Face Mask Test
Mask and goggles from available materials: • 🔅 Face Mask & Safety G...
Respirator # 3: • 🔅 DIY Respirator #3 (u...
Respirator # 2: • 🔅 DIY Respirator #2 (i...
Gas Mask: • 🔅 Gas Mask - DIY
The cold came, and all the shortcomings of the factory masks were immediately revealed.
Firstly, the masks immediately began to condense moisture, and secondly, when using them, the lenses of the glasses began to fog up.
Taking into account the above and the existing developments in the field of protective equipment, I have designed a respirator that is devoid of most of the known disadvantages. The respirator is equipped with serious inlet and outlet filters. Thanks to the rigid body, the respirator is securely pressed against the face. The magnetic latch makes it easy to put on and take off the respirator. The respirator is equipped with a membrane that transmits high sound frequencies when speaking, which significantly increases speech intelligibility. The bonus of this respirator is your smile that everyone can see.
List of materials
1. PET bottle 5L - 3pcs.
2. PET bottle 3L - 1pc.
3. PET bottle for milk or juice - 8 pcs.
4. Surgical glove - 1 pc.
5. Neodymium ring magnets - 2 pcs.
6. Screw M2.5x8 - 8 pcs.
7. Nut М2.5 - 16 pcs.
8. Washer М2,5 - 8 pcs.
9. Elastic band - 700mm
10. Double-sided adhesive tape - 900x12mm
11. Staple clips - 8 pcs.
12. Polyethylene foam - 4x40x400mm
13. Polypropylene film - Ø70x0.03mm
14. Foam rubber filter - Ø35x4mm - 2 pcs.
15. HEPA filter - Ø45mm
16. Steel plate - 1x8x96mm
17. Thick paper 400x5x0.35mm
Download the drawing: oldoctober.com/youtube/Respir...
Mirror: drive.google.com/file/d/18-95...
#facemask #coronavirus #protectivemask

[@leetae-kyoung1084]

I love Russian style technique. Simple and appropriate. ♥

[@user-ul3od8pm9e]

Nice work!

[@grayeaglej]

Impressive.

[@crazyskaterjackyt2160]

Cool video keep up the good work👍👍👍/крутое видео продолжай в том же духе👍👍👍

[@MackeyDeez]

Love it.

[@jorgemonroy5993]

Master, style and detail is perfect! I want to set up a work area for family use masks and in my workshop for paints, dust, etc., at the same COVID. You will have tutorial of masks for gas or gases and other particles. Also if possible some tools or accessories that you recommend to make or use for this purpose! Greetings and thanks

[@IurisWorkshop]

You can use an activated carbon filter. A similar filter is used in factory gas masks: kzbin.info/www/bejne/Y2armZ16erOZfLM But you should consult with a chemist additionally.

[@bonganimkhwanazi5097]

How to make that cutting thing I see other skills beside making mask, please tell us how to make that cutter

[@bonganimkhwanazi5097]

I did subscribe I'm waiting 🤣😂for that cutting leizer Video

[@z_ecMb_]

Интересный дядька)Для поделок бы 3д принтер ещё приобрести,на новый уровень бы всё вышло)

[@IurisWorkshop]

Серьёзный (лазерный) 3D принтер может позволить себе приобрести только большая компания. А то что доступно любителям, позволяет печатать только довольно специфические вещи. Причём более или менее точная печать занимает слишком много времени. Хотя есть много чего, что было бы рациональнее напечатать, чем выпиливать.

[@Geneu97]

Может я могу для вас трансляцию по английскому сделаю, а то голос робота звучит очень странно.

[@Iuris_Workshop]

Спасибо! Но у меня очень скромные доходы, чтобы нанимать фрилансера читать текст. К тому же это выйдет дороже доходов от подобного ролика, то есть будет нерентабельным. Мои самые популярные ролики вообще без озвучки.

[@Menshinin]

Что-то там с площадью фильтрующей поверхности приблизительно никак.

[@Iuris_Workshop]

Проверено на людях. Площадь зависит от эффективности фильтров.