잘보았습니다. 공교롭게도 아는분이 액정 가루가 된 S9 가져오셔서 덱스모드로 전화번호랑 이것저것 옮겨드린게 있는데 그 분은 가고 액정 가루된 S9만 남았는데... 저는 배터리가 있는 휴대용 모니터에 붙여서 활용해 볼까 생각했었는데 이렇게 과감하게 도전하는 방법도 있겠군요. 정말 재미있게 잘보고 갑니다.
@sun_woo_3 жыл бұрын
사실 가장 일반적인 대응방법이죠 ㅎㅎ
@nackdong41202 жыл бұрын
어떻게 하면 가능한건가요? 저도 갤럭시 s9+ 액정 완전 박살난게 있는데 대리점 가니까 못 옮겨준다고 그러더라구요 할 수 있는거 다 아는데 안해주는 것 같더라구요
@중훈김-z8z2 жыл бұрын
@@nackdong4120 귀찮은거죠.
@경상도-z8r2 жыл бұрын
@@nackdong4120 컴퓨터 연결만 하면 될텐데 참너무한곳이네요
@jaimeanaya-yo6vm Жыл бұрын
This man is everything I personally aspire to be as a tech enthusiast and lover of tech. This was so badass to see thank you very much! Frankly its getting to see the beautiful work ppl like this can do and are willing to share and teach that makes us all a better species
@reynard49762 жыл бұрын
Prossimo vídeo: como fazer uma Bomba Nuclear com um Nokia.
@therealthatcatstabe3602 жыл бұрын
This video literally takes the term "Modern problems require modern solution" to a whole new level
@dglee18263 жыл бұрын
폰을 뜯는다 -> 액정 연결 부분을 덱스로 연결한다 -> 유투버 납치해서 시킨다. 정말 빠르고 간편한 방법이네요
@ThomasKim01283 жыл бұрын
[속보] 유투버 닥모씨 납치되 핸폰 태블릿 개조하고 풀려나...ㅋㅋ
@Spinodal233 жыл бұрын
ㅋㅋㅋㅋㅋㅋㅋㅋㅋ
@Lee_serafim3 жыл бұрын
ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
@징검다리-b4q2 жыл бұрын
ㅋㅋㅋㅋㅋㅋ
@TribitFanOpex2 жыл бұрын
Even though it looks messy on the inside, It looks like a glorious peice of art.
@acumenium81573 жыл бұрын
You did amazing work as always. And thanks for repurposing a broken phone. With the move to OLED, replacing screens never makes any sense money-wise, so a lot of good phones just get thrown out, and that's bad. But you did great here.
@aussiefurbymogwaifan6621 Жыл бұрын
I have the same phone shown here, but it's the regular s9. I also have got a feeling that the og fold will get it's last major update this year, as it's going to be four years old, which is also this year. Surprised that the screen isn't broken on the one featured in the video
@su-yeongjeong3 жыл бұрын
거의 궁극기급 아니에요!? 대박이십니다. 금손이 따로 없으셔서 매우 부럽습니다.
@엄-x3d3 жыл бұрын
저 덱스로 태블릿으로 개조가 가능하다니 진짜 안드로이드와 삼성의 ONE UI가 잘만든 작품이라는게 느껴지네요...! 저도 마음같으면 망가진 핸드폰을 태블릿으로 만들고 싶지만 망가진것중에 덱스를 지원하는 폰이 없어서.... 아쉽네요
@DIYDrK3 жыл бұрын
미러링으로도 되긴 됩니다만... 제가 해본결과 덱스모드가 백배는 더 편합니다. 미러링 모드는 회전에 문제가 있어서요.
@judgejung488 Жыл бұрын
@@DIYDrK s9 이전 모델들은 프로세서나 메모리 땜시 너무 버벅거릴것 같아요. 안드로이드 버젼도 문제공.
@donaizak3 жыл бұрын
Estoy seguro de que algún día tu canal será gigantesco este contenido tiene mucho esfuerzo y trabajo ganaste un nuevo sub y un like 👍
@nintendero652 жыл бұрын
@@anzaichiyomi2893 tu callate
@권현우-o4z3 жыл бұрын
역시 이과는 대단해...
@sen_hikari2 жыл бұрын
이과의 기술력은 세계 제일!!
@xxelnombrexxpastero63832 жыл бұрын
Entiendo
@서강준-t5e2 жыл бұрын
99%의 이과: ??? 어케했노
@user-cong312 жыл бұрын
갤럭시라서 액정이 은하수처럼 깨졌냐는....
@지후-j7v2 жыл бұрын
이과아님
@maniek79 Жыл бұрын
Greetings from Poland! I am really glad that you have put English subtitles on your videos, we seem to have very similar interests and I'm really glad language isn't a barrier here. Keep up you awesome cyberpunk-esque inventions coming! Maybe one day I'll be brave enough to share videos of my projects
@pixelatedzephyr63256 ай бұрын
let me know if you do
@MinC-KIM3 жыл бұрын
3D 프린터로 마감한 부분은 전기 인두로 평평하게 할때는 면이 넓은 것을 쓰면 빠르고 편합니다. 한번 만들어 보고 싶네요. 단지 집에 굴러다니는 폰은 갤노트5랑 아이폰 6S라서...
@marksmithcollins3 жыл бұрын
칼팁..
@이민서-o5r Жыл бұрын
나도 문과에서 이과될래
@pastoralejandrogomezgarcia1732 жыл бұрын
tus videos son de lo mejor que he encontrado en youtube, gracias por agregar subtítulos para poder apreciar mejor tus obras
@Queenochee2 жыл бұрын
Impresionante tus videos 👌👌👌😎👏👏👏👏👏genio!!!... Saludos desde Argentina 🇦🇷
@L1Q2 жыл бұрын
someone posted ins on r/SamsungDex and it made a highlight of the day for me. you certainly have skill to solder pretty well, yet improvise USB extension cables instead of soldering the USB port out of the hub and connecting things directly. not to discourage, was a fun watch, I'm happy to see you are having fun!
@김보성-b3l2 жыл бұрын
분명 성능은 갤럭시S9급인데 폰으로 즐기는것보다 성능이 더좋아요. 창조주 이런분이 LG에 계셨더라면 LG는 MC사업부 흑자전환 가능했을걸요.^^ 스피커도 3W×2 6W로하고 요정도 디스플레이 크기람 누워서 까까 주워먹으면서 영화나 애니감상하면 집안의 영화관도 될뜻합니다. 저는 다시초심으로 돌아가 설계와IT를 공부하겠습니다.^^
@DIYDrK2 жыл бұрын
저도 항상 초심으로 제작하고 있습니다. 감사합니다.
@jesuscabrera12233 жыл бұрын
os quedó super bien, un poco tosca en algunos aspectos pero se ve genial 😎
@revoltosotintan2 жыл бұрын
Yo apenas lo descubri y hace unas modificaciones bien chulas
@1109rna Жыл бұрын
이제 부터라도 3D프린터 배워서 만듭시다???
@marcosjsantos45602 жыл бұрын
Muito bom!!!! trabalho com manutenção de celulares .. e admiro muito o conhecimento e criatividade de vocês.
@daniloaugustodacruz1622 жыл бұрын
É Chinês ou Japonês?
@kitex55482 жыл бұрын
coréen
@hinotle2 жыл бұрын
@@daniloaugustodacruz162 Coreano
@haraki31172 жыл бұрын
@@hinotle ._.
@diego_af2 жыл бұрын
Jamais imaginava que tinha BR perdido por aqui kkkkkkkk
@BlueGirlCandy2 жыл бұрын
*Buen trabajo, eres un genio, muchas bendiciones para ti amigo.*
@oherman2 жыл бұрын
Because of the smashed display of the phone, will the phone malfunction if you tried taking out the broken display? Taking the electronics of the phone and laying it out on the tablet might help it become thinner and help in heat dissipation too. This is a novel idea that can be improved with 3d printing, aluminum backbone and some downsizing from the original phone, including making the sim tray accessible and relocating the camera. It may be extra unnecessary work but its rebirth as a tablet should come out nice.
It has become very photoristic for the look I like the way it is and so it is a very unique piece that I like!The technical solution is very creative and works well as I see it!Congratulations on a nice workflow and ingorious video!Look at me too welcome to see you here!Have another nice day! 👍☀️🍀👆
@andmathanitopia82783 жыл бұрын
이건 아무것도 모르는 저조차도 따라해보고 싶을 정도로 유용하네요. 잘보고 갑니다. ^^
@jungsik07072 жыл бұрын
터치스크린의 USB를 허브쪽에 연결할때 USB A커넥터에 납땜을 하고 허브에 꼽는것보다 허브의 USB커넥터를 적출하고 거기에 납땜하는 편이 여러므로 낫지 않았을까요?
@user-sidiyi3 жыл бұрын
와 신박하네요 ! 3D 프린터기만 있었다면 완성도가 ㅎㅎ
@노란천사-l4g Жыл бұрын
승우 아빠 : 태블릿은 사드세요.
@edgaradrianhuizar14412 жыл бұрын
Con unas lijas se puede dar buen acabado a los bordes amigo. Me impresionan tus proyectos!
@angelitoflowers2 жыл бұрын
Creo que te quedó muy bien, aunque parece que gastaste un muchas cosas.
@GAnimeRO2 жыл бұрын
Thank you for adding english subtitles! Watching your tinkering videos is so cool!
@DocMW3 жыл бұрын
I'd put a baking sheet on the 3d printed sides and use an iron to smooth the sides and if it was a working phone you could make side walls, glue the USB port to it and slide the phone in and out. I made this thing with a wooden frame but I couldn't think of making a 12v battery. I'll use your tips. Thank you for the video!
@DIYDrK3 жыл бұрын
I wish you make a wonderful tablet!
@DocMW3 жыл бұрын
Thank you)
@RealEpikCartfrenYT2 жыл бұрын
I would have added an aluminium plate to the back of the screen to provide rigidity, and i would have made the casing from wood instead of transparent polycarbonate. But still, the tablet turned out pretty good, despite its messy appearance. Good work
@dizzythakidd73502 жыл бұрын
post something better bro ? lets see what you got can you even do what this guy does ?
@RealEpikCartfrenYT2 жыл бұрын
@@dizzythakidd7350 i would if i had the parts to it. But I don't so I won't.
@dizzythakidd73502 жыл бұрын
@@RealEpikCartfrenYT alright man sorry to page you like that it seems you are genuine i thought you were trying to say you could do better then him or some shit lol
@marksmithcollins2 жыл бұрын
If you don't have aluminium sheet or wood, you might better not talk about electronics modding plans.
@PeNsiONnNeR2 жыл бұрын
Типичный планшет с AliExpress
@justryingmybest2 жыл бұрын
This helps prevent e-waste, and you made a really powerful tablet for much less than what they would charge. Great work!
@otistically2 жыл бұрын
**포요** ~ (Cool point Sean.)
@jtag79 Жыл бұрын
7еппапнр
@gamja47 ай бұрын
인두기 할수만 있으면 따라 할수 있을까요?
@ohsoonho94402 жыл бұрын
폰에서 보드 적출하고 폰 보드에 태블릿배터리 연결해주는식으로 하면 뒷면 회로부 공간 확보가 더 쉽고 좋을것같네요ㅎㅎ 영상 잘 보았습니다
@slimeproanimation22362 жыл бұрын
squid game 24:22
@MrSoftypolimer2 жыл бұрын
Absolutely good idea. A proper screen replacement can be expensive for many smartphones. Especially the high-end one that is no longer the latest model but far from being obsolete. You can easily get them used with about the same as the official repairing service price and the third party screen can have some quirk and are usually expensive during this time. So why not just get a new phone (or used one) and breathe an old trusty one a new life. I don't have much soldering skill so I simply connect the broken screen Huawei P30 pro to a living room TV.
@wafdsjhnszfgdgjesawetr2 жыл бұрын
are you sure that all that things in there is not more expensive than replacing the screen?
@AJ-fq6pw2 жыл бұрын
There are cheaper alternatives, this is just for fun DIY project. portable screens available in market, some even have type c input (no need of converters) with much better screen and touch quality and have their own battery.
@judgejung488 Жыл бұрын
@@wafdsjhnszfgdgjesawetr 이 유튜버가 마지막에 말했잖아... 비용과 작업 시간을 생각하면 명백히 손해인건 아는데... 만드는게 재미있어서 한다고... 휴대폰은 어차피 S9 고쳐 쓰느니 신형으로 구입하면 되는거고.
@aussiefurbymogwaifan6621 Жыл бұрын
*ESPECIALLY* if it's got Samsung's infamous curved screen
@mashacergeeva33212 жыл бұрын
Это че такой огромный планшет нечего себе я таких не видела😁
@MeMe-ys1zd3 жыл бұрын
전자회로랑 임베디드 시스템에서 배우던걸 직접 하시는 군요.... 존경합니다
@indrequinenillas44653 жыл бұрын
your genius in your kind of way , but please be gentle on tinkering your invention
@yuuta85572 жыл бұрын
Screen has a bad touch response delay as i could see but this is reeeeeealy nice. I actually like how it is a mess at the back. It shows how much hard work and dedication you gave. Please give more contents like this!
@Shan_Shah Жыл бұрын
Just buy a galaxy tab instead
@monimik3572 Жыл бұрын
@@Shan_Shah nobody asked
@Shan_Shah Жыл бұрын
@@monimik3572 Shatan
@Lewis94YouTube Жыл бұрын
@@Shan_Shah you will pay? Shut up
@HenriqueSouzaLima922 жыл бұрын
Belo trabalho amigo. O mais doido é ver ainda mais pra mim que estava na procura de um curso de eletrônica e falar " Fazer o circuito não foi difícil" kkkkkkkk' pra mim foi sinistro, mesmo que no vídeo pareceu simples mas eu sei que na hora de fazer tudo é diferente do que pensamos. Vários componentes que fazem total diferença se soldar positivo e negativo em lugar errado ai dar um ruim brabo. mas é isso me mostrou que mesmo com somente um LCD e um celular com a tela quebrada porem funcionando da pra fazer um tablet top. MAS AI DOIDEIRA, meus parabéns!!!
@blitzphone Жыл бұрын
Eu quero fazer um igual... Kkkk imagina? Tablet de 128GB e 6 GB de RAM? Tudo isso por +/- R$350
@muryllogabriel3169 Жыл бұрын
@@blitzphone PENSEI IGUAL
@muryllogabriel3169 Жыл бұрын
@@blitzphone da pra usar ate como uma mesa digitalizadora
@nicholas3092 жыл бұрын
recommend to reassemble the broken phone first then the tablet would be slimmer. Anyway the tablet feels great and cool~
@y0mgi3d3 ай бұрын
Tu as fait du très bon travail, respectueux pour l'environnement en plus! Bravo! 정말 훌륭한 일을 하셨습니다. 환경도 존중하셨습니다!
@computeranddrum3 жыл бұрын
이번 영상도 신박하고 좋네요 ㅎㅎ 잘 봤습니다 ^^
@philliplanos2 жыл бұрын
If someone 3D printed a tablet form factor like this where a phone can be taken out or put back in whenever it would change the game. I have the actual Tab S8+ and man o man - you basically made one from scratch! 🎉
@임도레미-o5d2 жыл бұрын
미친,,,중고시장에가서 싸구려 구형폰 사고 싶은 생각이 들정도로 잘만드셧네요~!!! 엄청난 장인인듯~!!
@samhajeb595511 ай бұрын
umm your galaxy phone can charge at 5v 9v and probably 12v depending on the model. look up the usb c specifications. your step down module is not necessary. I would have thought you knew this with your seemingly decent electronics experience. hmmm
@daehyunwi90452 жыл бұрын
그냥 어메이징 하다는 말 밖에 안나오네요. 최고 입니다!!!
@sup3r-d4n1-bg2 жыл бұрын
Me while watching the exact same phone as mine but BROKEN!😔😐
@bskim69653 жыл бұрын
저도 만드는걸 참 좋아하는데 보는걸로 만족할수 밖에 없네요 ㅎㅎ 항상 멋진 작품들 잘 보고 갑니다
@yxh96752 жыл бұрын
한국체널인데 외국댓글이 더 많음 It's a Korean channel, but there are more foreign comments.
@DIYDrK2 жыл бұрын
아무래도 외국에 덕후님들이 더 많죠 ㅋ
@marksmithcollins3 жыл бұрын
그러니까 평소에 보호케이스를 쓰면 이 모든 고생을 안해도 된다는 주제인거죠?
@DIYDrK3 жыл бұрын
그... 그렇죠?
@빠니보틀니-v4k2 жыл бұрын
안그래도 액정 파손된 갤s8+ 태블릿으로 만들까 했는데 좋은 아이디어네요 ! ㅋㅋㅋ 그리고 3d펜 작업시 환기 필요할것 같아요. 3d프린터의 경우 요즘 육종암(혈액암) 이슈가 있더라구요. ABS필라멘트를 작은 공간에서 여러대로 쉼없이 돌렸다 하더라구요. PLA의 경우 ABS에 비해 18%정도 유독물질이 있다지만 없는건 아니라서 되도록 작업시 환기를 필히 시키 시는게 좋을것 같습니다. 환기여부를 잘 모르지만 걱정되서 주제넘게 댓글 남겨봐요^^ 앞으로도 좋은 영상 기대하겠습니다!
@DIYDrK2 жыл бұрын
네, 그렇게 하고 있습니다. 공기 청정기도 돌리구요. 3D 프린터 만큼은 아니라도 조심하는게 좋겠죠?
@tvamazingeee41862 жыл бұрын
제목보고 나도 해봐야지 했다가... 영상보고 뭔가 컴퓨터를 한대 만드는 수준이네요^^ 3D 펜으로 작업하는 부분은 무언가 소소한 게 재미있어보이네요^^
@gunheo43612 жыл бұрын
저도 이런 상상을 했었는데 직접하시다니 대단합니다 핸드폰 cpu가 상당히 좋아지고 기능도 얼마나 많습니까 충분히 다양한 방법으로 개조 해 볼 만 합니다
@ggonyang23 жыл бұрын
유익한 튜닝이네요. 집에 s8 폰 굴러다니는거 덱스모드 되면 시도해봐야겠네요. 영상 늘 잼있게 보고 있습니다. 화이팅
@SearInMinecraft3 жыл бұрын
I don't understand or speak Korean but this is genius
@deividbezeng66362 жыл бұрын
projeto muito bom me deu uma boa ideia aki tem um cara vendendo um s8 tela trincada de 200 reais ja tenho a tela agora so falta as baterias e modulo pra carregamento e vou fazer uma tampa traseira mais profissional
@loop57202 жыл бұрын
I've always had an idea like this, not gonna lie, Korean tech youtubers just implement most of them from my head without me knowing so, lol. This is too good.
@김우람-h7s2 жыл бұрын
닥터 케이 님의 유튜브 동영상을 구독 후 몇번이나 시청하는데, 사실 궁금한 점이 있습니다. 덱스 테블릿을 만드는데, 테두리 부분이 나무로 만든 것도 되나요?
@DIYDrK2 жыл бұрын
상관 없습니다. 플라스틱보다는 발열 면에서 좀 더 안좋긴 하겠지요.
@kurtjeon3 жыл бұрын
정말 예전부터 생각했던건데 지식이 없어서 못했는데. 부품들 디테일하게 목록받을수 있을까요? 보면서 따라하는거는 잘해요. 3디 프린터는 할 줄 하니까 제거 만들면 보내드릴게요.
@DIYDrK3 жыл бұрын
대략적인 부품 리스트는 영상 설명에 나와있습니다.
@rainbow-reflection2 жыл бұрын
잘봤습니다. 와 인건비도 안나오겠어요 ㅋㅋㅋ 질문 2가지만요! 노란색테이프는 뭐라고 검색해야하나요? 그리고 글루건대비 3d 펜의 장점은 뭐가있나요?
@DIYDrK2 жыл бұрын
1. 캡톤테이프 2. 강도가 수십배입니다. 글루건 - 문구용 가위로도 잘린다. 3D펜 - 강력한 니퍼로도 간신히 자른다.
@rainbow-reflection2 жыл бұрын
@@DIYDrK 빠른 답변 감사합니다. 3D펜 강도가 살벌하네요 거의 믹스앤픽스급이네요 하나 들여놓으면 요긴하게 쓰일것 같네요 그냥 싼거 아무거나 사면 안돼겠죠? ㅎㅎ
@DIYDrK2 жыл бұрын
그럼요. 제것도 5만원 안되는 제품입니다.
@andrievbastichy85512 жыл бұрын
Good job bro.. but im too lazy for all that.. maybe u should do some kits and put them on ebay! and all the person has to do is slide in the phone.
@ShanLiuGBM2 жыл бұрын
I do enjoy the idea, but if a hdmi input is added to switch the tablet to a monitor, it would be nice. I know hdmi is hard to solder, but small kvm can be harvested to make one.
@JacksgapKIMHO Жыл бұрын
노트북 스마트폰 만들어!!좋아!! good 안드로이드dex 갤럭시폰pc have 댓글하다!!!
@Jv_jvliette2 жыл бұрын
The tablet is so stylish! It would litteraly work like a samsung version of the microsoft surface and I love that design! I think i will try this kind of 2nd life for old phones and to play a little
@agentburningbutters36552 жыл бұрын
Your a born genius! I will definingly want your whole stock :)
@genesismaitte36192 жыл бұрын
Excelente no entendí nada pero me gustó todo el proceso gracias por los subtitulado
@이세진-d9e Жыл бұрын
프라모델이나 모으는 것들 그냥 완성품 이나 다 모아져있는 것들 사지 뭐하러 직접 모으겠나요, 당연히 만드는게 재미있어서 하는건데 물어보는 사람들도 있긴한가보네요 ㅋㅋ
@JYJ-u6q3 жыл бұрын
혹시 휴대폰 방전 상태일시 다시 충전후에 삼성DEX 진입을 따로 조작 없이 가능한건가용!!?? 그리구 휴대폰쪽 이랑 디스플레이쪽 이랑 맞닿은 부분은 발열이 상당할텐데 괜찮던가용..?? 너무 멋진 아이디어 였어요!!!
@DIYDrK3 жыл бұрын
네, 전원만 들어가면 부팅직후 자동 진입입니다. 발열은 어쩔 수 없는데 워낙 커서 다른 부분에 열이 전혀 없기 때문에 괜찮습니다.
@JYJ-u6q3 жыл бұрын
@@DIYDrK 디스플레이쪽 특정부분 계속 열발생시키면 6개월정도면 해당 부분 터치나 화면 깨짐발생이 잦더라구요 ㅠ 그래서 구리스패드 정도 붙이면 어떨까해서...
You need invest in some 3d printer. It would be looking much better.
@LeninuZ2 жыл бұрын
Genial, me gustaría algún día hacer algo similar
@DIYDrK2 жыл бұрын
You can do it.
@manugamebox7592 жыл бұрын
Sos un genio hermano
@judgejung488 Жыл бұрын
오우! 제 S10 맛탱이 가면 꼭 시도해 봐야 겠네요. 이놈에 레노보 p11너무 버벅거려서 프로버젼 살까 말까 했었는데.. 님의 이 물건이 더 성능이 좋아 보이네요. 폰도 분해해 PCB만 뽑아내는 등 더 시간을 들이면 아주 깔끔한 고성능으로 제작 하실 수 있을것 같은데 빨리 보여주고 싶으셔서 급하게 만드신듯요. 첫눈에 구독했어요. ^^
@wavymon12 жыл бұрын
와이건 정말 대박이네요 ㅎㅎ 이렇게까지 사용할거란 생각을 못했네요
@Geriarts2 жыл бұрын
O projeto de eletrônica é genial mesmo (um pouco caro no Brasil), mas seu acabamento...ficou zuado hein!! Kkkkkk Parabéns.
@dianaminzer6266 Жыл бұрын
Me encantan tus vídeos, estudio ingeniería electrónica y hace mucho que youtube no me recomienda vídeos de electrónica. Solo que bueno, si un flex es demasiado largo, simplemente lo puedes cortar y seguirá funcionando xD. Me pone nerviosa cuando pegas las cosas con masilla o doblas los cables pero aún así está muy bien. :)
@jcodroid Жыл бұрын
acabo de ver este video y me a motivado de hacer uno pero tengo un sony podrias ayudarme? a entener un poquito mas :D
@Tipoda4564 ай бұрын
22:27 nice Tablet you made a Tablet nice work :) 👍
@DiegoEduardoResendiz952 жыл бұрын
Los asiáticos son otro nivel
@rja57482 жыл бұрын
Otro hasta yo puediera hacer comprando las partes se puede hacer 3 en uno tv pc monitor de 70 o mas pulgas con solo acoplarle a un tv plasma .
@ferencm.36352 жыл бұрын
Technik,Manual? Hm O.K. Wery Good,WOW.
@joosewoog3 жыл бұрын
처음엔 만만할 줄 알았는데 갈수록 부품이 늘어나는게... 쉬운게 없네요 ㅋ
@DIYDrK3 жыл бұрын
그렇죠.. 세상만사 모든것이 쉬운게 없죠.
@DIY.경주새천년미소10 ай бұрын
저기에 나중에 폰 고장나면 오드로이드 N2L 이나 이런 장치들도 추가해도 될듯 하네요
@VIVIZandNaV3 жыл бұрын
전 닥터케이님이 재미있게 만드시는 걸 보는게 재밌는 사람입니다..!
@DIYDrK3 жыл бұрын
오? ㅋ
@JAxD_ Жыл бұрын
Esta muy bueno yo lo hise con un s9 + que tenia por ahi y lo uso con un teclado y raton en la tv por hdmi y buen video saludos desde mexico 🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽
@kangyeungkim88142 жыл бұрын
닥터k님 질문 하나 남겨봅니다. ㅎㅎ 영상에서 구매하신 액정보다 더 큰 화면을 써도 제작에는 문제 없을까요?? 혹시나해서 여쭤봅니다 ㅎㅎ
@DIYDrK2 жыл бұрын
문제는 없습니다. 커지면 더 큰 배터리를 넣을 수도 있고 좋죠. 무게 빼고는요.
@kangyeungkim88142 жыл бұрын
답변 감사합니다 ㅎㅎ 추운 겨울 몸 조심하십쇼 ㅎ
@일반김밥-y2v2 жыл бұрын
3d 프린터로 케이스제작까지하시면 완전한 diy일 듯합니다
@마르코반바스텐-l1g2 жыл бұрын
와대박 금손이시네요ㅋㅋㅋ진짜 마음먹고만들면 근사하게 만들수있겠네요~~~나중에 기회가되면 따라해봐야겠어요 영상 잘보고 갑니다.
@federico-d5 ай бұрын
videos videos
@toto111312072 жыл бұрын
ㅋㅋㅋ 지금 닥터케이님 영상을 갤S8 액파폰을 TV에 연결하여 보고 있습니다. 액파폰 덱스모드 TV연결은 최고의 스마트TV 구현방법이죠. 영화, 유투브, 브라우징, NAS연결등등등 최곱니다~
@DIYDrK2 жыл бұрын
정말 알차게 잘 활용하시는군요 ㅎㅎ
@edwinmendoza85662 жыл бұрын
Saludos Desde México Gran Trabajo que as echo felicidades
@ぷにまるもぐもぐぽぽんた2 жыл бұрын
This is Samsung Galaxy Tab S"5" (not S5e)
@karinaFZ252 жыл бұрын
Você é muito inteligente,,amei o video gosto muito de eletrônica,,,parabéns
@rja57482 жыл бұрын
Hasta tu puedes hacervsi aprendes electronica
@TheBlackFoxMaster2 жыл бұрын
Я так и не понял, как ты подключил тачскрин.
@뙓-e4u3 жыл бұрын
와! 저도한번 따라해보고 싶네요! 근데 오늘도 퀄리티는 최고네요 !
@MAKCC460 Жыл бұрын
Cool idea! The only thing I would add more batteries, and connect them in parallel. And I would connect them to the charge controller board on the phone. And from the same battery I would connect a boost converter for the screen. In this case, the phone will display the total charge level in the system, and there will be no need for third-party charge indication. Still not enough to attach a keyboard / case