How to Build a Homemade Tool for Copper Wire Stripping - DIY

Are you a copper collector? If so then congratulations! The following tool is very much needed for you! In the next video I made I will show you an easy and quick way to build a tool for peeling copper wires easily. To facilitate the process of building the tool, I avoided using welding and tools that are not available to anyone. Of course, I have tried to use the materials that everyone has in their workshop or home. Certainly as a considered collector, this tool has made my life a lot better and that is why I decided to build it. So if you were looking for an easy and quick way to build such a tool watch the video and tell me what you think about it in the comments here.
Follow me and stay tuned:
Instagram / diyfixman
KZbin / diyfixman
Facebook / diyfixman
Pinterest / diyfixman
TikTok / diyfixman
Watch all my Videos bit.ly/2kHCZq0
No matter what language you speak, join our global Facebook group now.
There you can see DIY works of people from around the world!
Join now: / diyfixman
Thank you very much to all my KZbin followers. Thank you for your great support. You are the ones who motivate me to make interesting new videos for you. Without you it would not have happened! if you like my videos please let me know in the comments, like, share and follow me, your help is much appreciated. If you would like to support my videos feel free to like, share and subscribe, that helps me a lot. I wish everyone a pleasent and enjoyable viewing.
#DIY #homemadetools #wirestripper

[@DIYFixMan]

How I Built a War Hammer - Look What I Did To Him kzbin.info/www/bejne/nX-ni4mdfKmBhbs

[@siyad206]

I need this meche

[@siyad206]

8943261467

[@Junkdrawerfindz]

How much to buy one?

[@DIYFixMan]

5$

[@suryaselvam1178]

@@siyad206 you

[@iamnickyj]

Great design man, super simple, easy to get parts, and to build, and inexpensive. Well done. Definitely building one

[@MOUNTAINEAGLES]

Excellent work!!!

[@DIYFixMan]

Thank you so much for watching my video

[@JM-dp9xl]

Soon as I saw the grease fitting, i knew it was gonna be good!

[@StepvanDan]

Great job ,i am going to make one for myself, thank you for sharing .very cool

[@DIYFixMan]

thank you ❤️❤️❤️

[@miguelnation1722]

That's the most creative thing I ever seen. I'm about to make me one I have some wire laying around that need cleaning

[@wingsuae]

We nice piece of work there, thanks for sharing, i will definitely build one for myself - two thumbs up

[@DIYFixMan]

thank you 😊

[@ecstaticpenguin768]

This is going to make life so much easier. Thank you!

[@ecstaticpenguin768]

I can't express the amount of gratitude. 😫

[@DIYFixMan]

Thank you very much my dear friend, I am very glad you liked my video. And I thank you with all my heart for your support!

[@smoxen]

Best made DIY (and simple) that I have seen !!...Thank You !!

[@DIYFixMan]

thanks bro ❤️❤️❤️

[@rustedratchetgarage6788]

Take a board clamp.it to a table drill a series of holes each larger than the last in a line keeping one edge of each hole 1 in from edge the screw 1.25in screws into the holes enough to pierce insulation after inserting wire through appropriate size hole create a crank handle to pull the wire and spool it on a dowel

[@billkirkland6389]

Great design and tool. I would really like to build one but need more detailed plans with deminsions. What are the two tapered gears that you are usings? The plate appears to be 4" X 4" and the threaded stoch is 1/2"?

[@jedclampett6466]

Excellent design of concept. For large volume of heavy gauge scrap the proportion of this device could be increased with an addition of a electric motor and gear reduction. Thanks for the vid.

[@DIYFixMan]

thank you ❤️❤️❤️

[@thorgeist666]

C’est simple mais efficace , excellent !👏🏻👏🏻

[@DIYFixMan]

thanks bro 😊

[@josephtincknell4708]

Very awesome! Now just need to hook up a dc motor to replace the crank and some kind of way to hold the wire straight with a bit of tension so you can just start the feed and it’ll do the rest automatically.

[@dooleyknoted5951]

I really appreciate people like you! Especially during times such as these! Many valuable options for retaining our liberty is extremely helpful! Thanks for sharing! You've got a new sub!

[@DIYFixMan]

Thank you so much my friend! I was happy to read what you wrote here.

[@KathrynsWorldWildfireTracking]

Firstly, bravo. This is amazing, and filming is superb. Adjustment - is the biggest time-waster of strippng. If you could make the blade ratchet up/down with a tumbscrew click-click-click: You'd have a massive edge over competition.

[@michaelcoriglianol7197]

Took some simple regular items and crafted an amazing usefull tool congradulations nice work.

[@DIYFixMan]

thank you

[@alisha75006]

I think you made wonderful crancking tool and if I were you I would've install small motor instead and enjoy the process but overall your creativity inspired. Thanks for sharing.

[@DIYFixMan]

Thank you very much my friend

[@Zappy1210]

In the process of making one of these for larger cable. I have tons of 350 and 4/0 GGC cable to strip which is difficult with just a razor knife... I have an electric stripper for the individual wires, just not the entire cable diameter. Going to figure out a way to drive it with the same motor as the electric stripper I already have.

[@HarrisonBennett1988]

This looks awesome!! Good work!

[@DIYFixMan]

thank bro 👍🏼

[@ronaldmiller285]

Awesome!!

[@DIYFixMan]

I'm happy, thank you very much

[@u2ooberboober]

Nice job. I like the non weld assembly!

[@DIYFixMan]

thanks man! ❤️❤️❤️

[@muzammildakhani3423]

Is it suitable for 1.0 mm wire

[@ThisHazeOnly]

Wow! This is definitely the best diy wire stripper design I've seen 👍👍 Using a pipe cutter wheel/disc instead of some sort of razor or blade, just brilliant!! And it quick adjusts for multiple size wire on the fly......?? Too cool! 😎😎 Thanks for sharing

[@DIYFixMan]

Thank you for your support

[@buentaste]

No it is not practical and easy to build for the average beginners. Where do you get those gear rollers, and if you don't have a vise how you keep this stripper unit steady? I bet you this stripper can not peel small stranded soft wire like the one that comes from extention cord or power cord from devices....

[@yogeshdharia7511]

very simple and effective......

[@DIYFixMan]

thanks ❤️

[@anandgaikwad9524]

You are really great.

[@DIYFixMan]

thank you my friend 😊

[@runsolo7418]

Well done.

[@richardmahan4197]

Genius!

[@user-bt7jg9ng9d]

You make good video clips. You are very attractive to follow. I just started making DIY clips. Thanks

[@DIYFixMan]

thanks man ❤️

[@Ra1276]

That's pretty cool...I just need two Honda Transmissions for those gears...

[@DIYFixMan]

😊

[@johannesthe5th154]

Nice touch with the tube cutter part. 👍 It can’t strip 1 mm cable?

[@AshokKumar-ft2kb]

such a great job keep it up frd if possible please send video how to make copper wire scrap granulator

[@DIYFixMan]

thanks ❤️❤️❤️

[@user-Xolyaj7679]

Молодец!

[@DIYFixMan]

Спасибо большое :)

[@alexandermcdougall8313]

Good pipe cutters have extra blades under the cap at the handle

[@lacgames8904]

#like parabéns pelo tutorial

[@BellyLachlan]

What size bevel gears are they? Awesome video I’m keen to make my own version thanks for the idea !

[@catsrocktheworld]

This is so cool

[@DIYFixMan]

thanks

[@arieldonbrais4310]

I haven't the half of those materials in my workshop :'( . Excelent tool, anyways.

[@DIYFixMan]

תודה רבה אריאל שצפית בסרטון שלי 🙏🏼🙏🏼🙏🏼

[@GermanMic]

Awesome work, man! My fav design yet, cool old school long last hand cranking tools Have always been my fav, no need to waste power for simple tasks! Thx for sharing! Love&blessings

[@DIYFixMan]

Thank you so much for watching this video, I thank you very much

[@innovationtime20]

good job bro i am a new subscriber 👍👍

[@DIYFixMan]

Thank you very much I am happy !!!

[@innovationtime20]

@@DIYFixMan 🌹🌹

[@frikkiesmit2695]

Busy to try and build similar one. Just dont have those gears.... Soo im gona try using big diameter gears on outside and between them smaller gears so you get the hourglass shape in center

[@AnastasiosPotamitis]

I didn't see any stranded, let's say #8 down to copper...As an idea, the construction durable but the cutting wheel trouble to adjust. Just my opinion

[@jksprecast2957]

My brother-in-law strips wire by hand and it takes him a long time. He has and collects a lot of wire so I think I will make one of these for him. You did a really nice video 👌👍😊.

[@DIYFixMan]

Thank you very much dear friend, I wish you good luck in the construction process

[@allenmckinney9533]

Always nice to be surprised with a stripper. Lol

[@johngarcia7735]

@@allenmckinney9533 i see reddit is leaking

[@rickyscott9019]

I appreciate it if you could make me one. I’m just an old tired trucker that’s scraping to pay Paul lol 7:21

[@10gurussingh]

Prepare a video on rope wire cutter small for havey wire too and plastic crusher

[@harbourdogNL]

That's so 'overbuilt'...you must be German! Impressive!

[@DIYFixMan]

Thank you, my friend!

[@vadim3976]

@@DIYFixMan only one country(our) uses such electric sockets. :)

[@stevenhopson5916]

Would be nice if you added a parts list and possibly links to purchase in the description.

[@JohnDisque]

Where would a fellow get those angled gears that pull the wire and hold it in place? Thanks

[@user-bi9pd9bh4y]

Подскажите от чего эти конические шестерни? И то на что крепятся вал этих шестерен и если можно размеры этих деталей и конструкции. И еще нож от чего?

[@sheeplesallaround8861]

Very creative, I love the idea and the way you built it. Does it work on smaller gauge wire like 14? Subbed and bell on!

[@Wa3ypx]

Have you built this? And, did it work on 14 ga. ?

[@tomarnold8379]

Oh my gosh who new I can get all these parts from work. Who would of thought working on a rock crusher would be useful

[@jimdeck8670]

That's impressive bro! You have bolts at your work? Wow are you some kind of special agent or something?? All this time and we had nuts and bolts on site after all! I'll go ahead and tip off the media. This is going to be a HUGE story. Your work must be like the Pentagon.

[@jimdeck8670]

I'm guessing your wife wears flannel pajama pants and looney tunes tshirts.

[@tomarnold8379]

Not even close but I'm guessing u don't have a wife?

[@DIYFixMan]

Friends should not quarrel ....

[@tomarnold8379]

@@DIYFixMan i don't even know this guy

[@104littleal6]

Use a 1/2" drill on it for longer wire.

[@joestreet7036]

I like it but wonder if it needs giide to keep wire in right pisition

[@desinfector]

I get the same price with the outer insulation still on. I would have to strip the inner ones too, to get more money.

[@lucashunnisett3066]

Love the video I’m gonna have to make one. I just don’t know what the part is that looks like a gear. Also the parts that mounts to the bottom plate with the bearings in it. I don’t know the name of those parts or where to get them. Cheers

[@DIYFixMan]

thanks 😊

[@Jonas-qu8ht]

How do you stripe the smal cables? Does it work with 1.5mm2?

[@viktorkunzhusum]

👍👍👍

[@michaelpetrik334]

Brilliant design! Where did you source the gears from?

[@jasonpaden7315]

Right ..Where'd you get the gears cuz it wasnt home depot

[@adrianr4971]

Hi there , Might i ask for measurments regarding the bevel bearings , or better ask you to leave links for us to follow at all ????? I'm in desparate need of this device in my world , I'm going to make a double one ,,,,,,, one for big wire , and the other for small :) Much thanks , Adrian

[@thecreativebanglachannel1943]

great work bro☺😍☺

[@DIYFixMan]

Thank you very much dear man

[@thecreativebanglachannel1943]

Welcome brother🙂🙂

[@sworf1sh]

Very nice video! I'm your new follower! Do anyone knows if this does work for thin cables? Like 1.5mm?

[@DIYFixMan]

Hey friend! Thank you so much for your support! The answer is yes, it works great even on 1.5mm wire

[@matthewmatthew5123]

great job just an idea instead of the knob that takes up space (if you have little space) why don't you fix the drill spindle?

[@DIYFixMan]

You're right, that's a good option too

[@hammadsadiq5716]

Excellent work brother. I really appreciate your effort and work. Really amazing. But something is lacking that is components name. Plz also add and upload components names in subtitle.

[@DIYFixMan]

You're absolutely right bro, I'll update this later

[@hammadsadiq5716]

@@DIYFixMan I am waiting brother

[@bl-ou3or]

Super

[@DIYFixMan]

thanks

[@islandseeker1260]

How well does it work for stripping the copper wire out of the plastic insulation? All I saw was stripping three smaller insulated wires out of a larger wire... or was this the sole intended purpose?

[@mattyal9347]

What did you take those gears from?

[@nasiralisayyed6603]

Gear factory

[@Isupportisreal2023]

They are Transmission type gears.

[@jamiskromo2079]

Gears of war 2

[@Kultakala_Design_Studio]

Good work !

[@DIYFixMan]

❤️

[@leslielam187]

What the thinnest wire can it strip?

[@user-gd1xq9ph7f]

СУПЕР!!!

[@arvineancelgonzales9053]

List of materials plss. God bless. Thank you

[@GABBYMusic]

Awesome 👍

[@lisevivier1878]

Hello, I bought a hand crank wire stripper but the gears do not hold the wire, they just slide under the wire. Do you know where I can find the gears you are using. Maybe they would work better. Thank you.

[@MrDeeks559]

Thank you so much for this diy video! But I was wondering what that component is called at 1:26? Thank you so much in advance!

[@DIYFixMan]

These are gears I disassembled from an old industrial machine

[@bartosztumielewicz3426]

@@DIYFixMan and what's the name of those 2 parts at 1:37?

[@tomiadventures]

i wonder how small a gauge u could do with this. 24AWG?

[@Majataka]

For those wondering what those gears are called. Those are Bevel Gears. I'll try to make this one myself. Only missing the bearings but I know a local dealer.

[@DIYFixMan]

Good luck you friend

[@ellieprice3396]

They're called "pillow blocks" in the trade and can be purchased at McMaster Carr or Graingers, etc. be sure to get the keyed type.

[@valeri7775]

Добрый день. Подскажите пожалуйста шестерни маркировку, или от чего они.Какой диаметп резьбовой шпильки?

[@josevalval6431]

Boa noite eu gostaria de perguntar quanto ficaria uma máquina dessa se você vende para Salvador

[@gabrielrachamim8969]

🔝🚀

[@piratboss]

what are those gears called? to "feed" the cable in? what r they from?

[@felipel6340]

They are called bevel gears, easily found on eBay. Like $20 for the pair.

[@edwood3114]

Where did you get the gears ?

[@bulletcatcher5318]

Where can I find the spider gears?

[@edilbertodiaz7489]

Mejor seria darle buen uso al cable encauchetado qe dañarlo de esa forma maqina para dañar cables es lo qe hiso usted

[@chrisseivert5858]

What size carrier bearings are they. I'm having a hard time finding them where I live. TIA

[@DIYFixMan]

those gears are called. Those are Bevel Gears.

[@u2ooberboober]

Looks to be half in or smaller pillow block bearings

[@jackdanielspittman3456]

Can you send me a list of where toget the gears and holders please

[@mick1gallagher]

A simple hole drilled in a piece of wood and a Stanley blade will do the same thing and no need for expensive bevel gears

[@lykanos9355]

any chance you got a vid showing an efficient setup? was thinking the same thing

[@tomnobody9294]

I'm not easily impressed but your good at what you do. 👍

[@sjf67gto]

Where did you get the gears from

[@hemansr3893]

Very cool, keep the videos coming!!! :>)>

[@DIYFixMan]

Thank you so much for watching my video

[@michaelthomas115]

Awesome build!!! Huge question!! How much to build one for a individual? I believe I could possibly follow your video IF I had the tools,flat stock,all thread, gears and most of all the patients lol... But would much rather buy one from you and know it's right and works.

[@DIYFixMan]

Hey, where do you live? I can send you one

[@michaelthomas115]

@@DIYFixMan Awesome, live in Tennessee. How much do you charge per unit?

[@poormansadventures4625]

I'm in ohio and would be interested in buying one also

[@TheNiccodemus]

Massachusetts, USA here and I'd also buy one depending on price. I love the hand crank.

[@eyejuander2695]

@@DIYFixMan Hello sir, Im impressed with the wire stripper that you made. Im Del from Philippines. And Id like to have that kind of wire stripping machine that you built. Amazing

[@frikkiesmit2695]

I started mine but not working correct i must adjust few things

[@siddiqhamedAwad]

What I see that there is no any welding works in this idea !!! what a nice job ...But with little of thinking to add hard spring to push down cutting holder instead of balance it Manually

[@DIYFixMan]

Thank you so much for watching my video! You're definitely right I didn't think about it

[@siddiqhamedAwad]

@@DIYFixMan you well come. I took your idear but for 300 mm cables i made it with biger size gears

[@rafisayeds8345]

Sir i want these

[@hjjkth8hygfjhhfutvruydfwygtd4r]

I want to buy this machine

[@JOEY22445]

So this a really cool idea only problem is you haven't mentioned what size of anything you used. Could you put that information in the description or perhaps pin the comment? Thank you.

[@RafTokar]

А можете скинуть эскизы хомутов и какие шестерни использовались ?

[@kevinwest9524]

Where did you come across the gears for this project?

[@ulfhenarpolymathmilitant6258]

well .........a junk riding lawnmower where you can part away with the transmission ........many gears inside .

[@cryptoocean7621]

would have been nice to have a parts list i don't know what size cogs or bearing you have used ?

[@DIYFixMan]

Do you believe me that I don't know either?

[@user-qo2iz7nm5t]

Если поставить пружину между пластиной и гайкой, то ролик будет автоматически выбирать давление и зазор на провод

[@charliebecker2216]

I could have used this today . I was stripping heavy duty plastic off aluminum wire . Design looks great I wonder if 3/4 plywood be sufficient.? Works like a champ.

[@Denis-dy2vj]

Где такие шестерни большие взяли ???

[@appstube9157]

What's the name of that roller accessory

[@vicferrari9380]

Now show us it strip some down to bare bright please

[@SANGREAZULCREMA7]

Can you do one for me please?