Honda Odyssey Tail Light Removal How to Replace Remove 2018 2019 2020 2021 2022 2023 Replacement

[@upsyndrome7560]

Thank you so much, this video is very helpful. More power to your channel!

[@DavidBeach-ds6ez]

This video was perfect. Every step was clearly shown and described. Pulling panels with those plastic tabs is nerve racking as you are never sure if there is something else holding them but you gave me the confidence to do it. I found the connectors on the back of the Honda chrome molding that houses the camera difficult to release (9:53 in video) so rather than risk breaking them I left them connected and I tied the trim to the rear wiper. Thank for your very detailed video

[@pandashadowplayz9232]

Finally, you made my day easier. Thank you for your video. I am going to install my inner tail light driver side soon. I hope you can do right fog lamp installation video. I am going to change my broken glass fog lamp. Thank for your very detailed video.

[@michaelleejames6596]

I tried to replace my brake light bulb but those damn clips kept breaking with my steak knife [no pry tool). I dropped 2 of those bolts inside the body but I think this magnet from harbor freight will get them...but where do I buy them if I may have lost a couple?

[@johnbutler1980]

I did it myself, thanks a lot mate. Those 8mm bolts were difficult to remove. Showroom quoted about 500 and i just paid for parts using amazon link. However it took me 2hrs in total alone

[@ryannelson6228]

This is exactly what I needed, thank you!!

[@xavieramercedes606]

Hello, i used your video to replace tail light and my headlight. My tail light still isn’t working. I don’t really understand why. Is there a fuse that may be out, or maybe something else. because both the left LeD headlight light and rear led head lights are not working. The reverse lights work and the headlight in front works but the Led portions will not come on. do you have any advice you could give? thank you for posting these very helpful videos.

[@michaelleejames6596]

There's a panel under the 2nd row that has master fuses. To remove the row pull the release cords while pulling firmly on the right side, then run to the other side making sure the other side doesn't re engage. Remove the second side. Lean it forward and remove the 6 inch bolt that holds the seat belt.. feed the belt threw the buckle until the buckle is free. This should reveal a metal plate with 4 tabs and one small spot wold. Just tap a grinder on the spot weld to break it apart. You may have to tap it with a hammer or a couple whacks with a xhizzle. After the plate is removed disconnect the battery before the next step. Some models will need the front headlight removed to get to the the tray under the battery to reach the side post. After that, then popp off the panel behind the row to reveal a fuse box panel cover. It has 10 twist n pop clips that take needle nose and a small flat head screwdriver. I think that's where one of the fuses are. The 2ndary fuse is under the center console. I wouldn't mess with that son of a batch though.😊