DIY Epoxy Table Build - Step By Step Guide (uncut)

Online Epoxy Table Master Class... CLICK HERE...
www.diywithgreg.com/product-p...
How you can find DIY With Greg:
Instagram - / diywithgreg
Facebook - / diywithgreg
DISCLAIMER:
All my videos are for entertainment purposes only. Woodworking and Metal Working are very dangerous activities and should only be performed by trained professionals.
#woodworking #resin #epoxytable

[@user-lc1gy3zc5m]

Congratulations 💐 My brother waoooooooooooooooooo beautiful work ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@dottiemathews6853]

Man, this table is killer sick beautiful!! LOVE IT!!!!

[@micoabojamamedetera5231]

I love the way u build my dreams.. hopefully I could make it too.. very nice..😊

[@offroadcrazy]

Dude you should market that planing sled as a kit. I'd buy it. That's definitely the best one I've seen yet. I really like the frame of it. It looks cool to. Great video!!👍👍

[@WoodlandRevivals]

This actually isn't a bad idea at all bro. Brand them and slang them to other builders 🙌

[@patricialozano4877]

¡¡¡¡EXCELENTE !!!! CÓRDOBA ARGENTINA.

[@JvsH1924]

Stunning. Love the partially translucent blue epoxy.

[@M-O-V-E-M-E-N-T]

You are well done ! this is a cool job! Thanks for the hard work!!!

[@malindakidder1308]

Stunning table.. Thanks Greg

[@woodenporium]

It is beautiful work, with an excellent finish. I watched the entire video and learned a lot👌👍👏👏👏

[@elyseruben4143]

Next time I would explain each step verbally as you are building so newbies could follow a little better. Nice work

[@anatbarin7405]

Супер!!!! Большой стол, и много работы! Респект!

[@SadePoetry]

Masterpiece!!!

[@GodOfThe5un]

This is amazing!!

[@casa2435]

really great performance thank you so much ...peace and love

[@blinGblinGBlah99]

That is a very mesmerising video. Wow.

[@salmanzaheer5060]

That's brilliant

[@trollmode3863]

Beautiful work

[@lifegemslostknowledge6230]

best 1 yet!!! omg this is the 1

[@uncleknife9887]

Killer Job!

[@KenyWoodturning]

Table so beautiful❤❤

[@reanwart205]

Sjoe ...dis kwaai.... you are the man... one day I will build my own tables.

[@timwilde4200]

Probably my favourite of your table tops.

[@abbasishahid3464]

It's outstanding really

[@Ali-qi8jb]

Well done buddy!

[@48H-REAL]

You are simply intelligent and a creative mind. From the making of the needed tools to do your project. To the finish of the actual epoxy table. Amazing job man.

[@fairviejo2297]

Exelente desde Aguazul casanare Colombia un abrazo fuerte 🎇

[@Gocrungnoipho]

nice, cool job 😘

[@georgeowoh9130]

Nice work. The finishing is superb. Many thanks for sharing this video.

[@diywithgreg]

Thank you! Cheers!

[@ilariabrunetti6475]

Bellissimo questa è arte

[@shawnshomali6556]

Hi after polishing the epoxy,if I put odies oil on the epoxy, will it make it shinier and scratch resistant?

[@josemiguelalvaradovictor5801]

Súper waooooii❤

[@shakhawathossain9289]

Could we use teak wood? What is the best ratio for epoxy and hardener? You are such an awesome artist😍.... God bless you with more ideas. Cheers

[@scottmulholland1329]

You really put a ton of time and effort into the design and build of this truly gorgeous finished piece, not to mention the production and editing of the video. Speaking of- Thank you for condensing each step into a manageable 30 minute video for numpties like myself! I know a table like this takes literally months of hard work (daily) to get to the finish line. Thanks. Btw that’s an ingenious little router slab device you’ve constructed- when you consider that Woodpeckers sells their Router Sleds for over a $1000 and yours is just as effective for a fraction of the cost: that’s a very clever design indeed! I’ve seen other videos on making DIY Router sleds- yours is brilliant! Simple yet clever! ……..I do have one quick question. I am currently in the process of building my own Rputer sled. I have not seen a Router Slab Bit for your sled as the heavy duty/big/wide yellow one that you have in your Router. Where did you buy this bit? It looks like a 1/2” shank, or is it a 1/4”? Thanks in advance for your help and attention to this question. I also look forward to more of your epoxy table/woodworking videos in the future. Cheers! Scott.

[@palashkumarchowdhury2998]

ণণনণণণণণণণনণণণনণণণণষণণণণণনণণণণণনণণষণণণণণণণণণননণনণণণণণণনননণণণণনণণণনণণণণণণণণণণণণণণনণণণণণনণণষ্ট।

[@diywithgreg]

Thanks so much for the kind words and support. Think the brand we buy is only from South Africa

[@jm2784]

Nos minutos 13:44 você passou uma Cêra pra que a cêra?

[@mustanglx351w]

Awesome work, how much epoxy did you end up using/needing? I am doing abiut same size and am unsure how much i need

[@chrishebert3240]

When you are done with the top of the table, what do you do with the bottom of the table?

[@primeboysander]

Do you ever have any issues sanding that high with Rubio? Don't they claim to stop sanding at 180 or 220?

[@asdhamecha3949]

Hi friend good work

[@Kava217]

Ой гуцалык муцацалык гуцацюнька гуцаца 👍👍👍 !!!!

[@roym.1141]

Greg you need better breathing protection and a better track saw! love the videos though

[@diywithgreg]

Roy, thanks. This is an older video, you should check out our new videos. Much better 👌🏻

[@bitsurfer0101]

Do you have any plans for the sled for sale?

[@fairviejo2297]

Muchas gracias 😂

[@-NimalKumara]

What is the *cream* used for polishing? Is it a * polish* ? i am interesting !!

[@hdelbrinalo434]

جميل جداً

[@Fincher123]

It got really Flat? Iam wondering becausethe rig is so wonky youcan see it clearly in 3:35.

[@SONYSTARMUSIC]

This great work is hard to learn? Can you create a nice table for me ?

[@diywithgreg]

Yes I can

[@timwilde4200]

I'm curious. I'm thinking of trying something like this both for a dining table and a desk. With the latter, would you keep it strictly a match with the wood used for the desk top as far as the drawer frame and drawer fronts are concerned, or try to get the epoxy and identical color in? I'm leaning to keeping it just wood so that the accent is on the desk top. Any thoughts?

[@diywithgreg]

Your idea sounds about what we would have done. Sounds good

[@Abdulloh_Tojir]

Good luck

[@Josaido]

What is the release wax you use in the mould? I've seen many people using tape instead so wondered if wax gives a better result.

[@garyburnett7378]

You have to be careful with melamine. If the epoxy heats up too much during curing, it can melt the vinyl part of the melamine and stick to your project. Tyvek or similar tape avoids this. It may require a little more sanding because of the lapping of the tape can leave a slightly uneven surface. But compared to prying the melted melamine off and then grinding and sanding the rest of it off, I will chose the Tyvek every time. Good luck.

[@annazukovski5053]

Хочу дать совет, приварите по краям стола уголки по 1,5м и проведите трос, и перекинуть провод через трос и вам не нодобудет его держать руками.

[@rameshshankar1010]

Had you put a smaller haphazardly cut piece in the big open space would ve saved the epoxy cost

[@diywithgreg]

Great idea, definitely

[@Chris60540]

Looks amazing 😊. But what kind of epoxy is it? Isnt it quite expensive, and what about fumes? Im tought up with epoxy being extremely poisonous, both inhaling it and by touch. But you Seem like you are handling a product thats harmless.

[@carlosalbertogarbijr6212]

What about under that table? There might be some parts of the wood the epoxy didn´t get so it´s not straight?

[@JeremyBrowning-qh8nv]

What thickness is the table top mate ?

[@raylenenorris680]

Good day Greg. I'd like to know where about are you guys situated? How do we get it touch with you?

[@diywithgreg]

South Africa

[@offroadcrazy]

What's the song that starts at 9 min? Love it!!!

[@WoodlandRevivals]

Locked Up by Autumn

[@user-bu7wy7xy3n]

pag magpapa gawa po ng ganyan magkano po aabutin? thank you

[@2aarms129]

In a work area with the open doors, how do you keep things from getting in the resin while it is curing?

[@diywithgreg]

We have a dust free room

[@user-ye4vp9eq5y]

❤❤❤ جميله جدا

[@hakanama50kg]

how many liter you use epoxy for this ?

[@merkanmustafov8132]

May I ask what you polish the table with?

[@diywithgreg]

We using the Festool system now

[@radow869]

Have you thought about doing a whole wall?

[@fanara33]

how much does a table like this cost? good job 💥

[@diywithgreg]

Depending on size

[@royaljanab814]

Which ruter bite use in video?

[@diywithgreg]

45 digress chamfer bit

[@bouhmidimohamed3555]

❤❤❤❤❤❤❤❤❤

[@pahmedia]

Paste wax like car wax?

[@ishitamahajan5592]

What you use to make mould

[@diywithgreg]

White melamine

[@kakacal.3847]

😊❤

[@mrdusadonja9549]

Kolko je trajao citav proces

[@ved-5522]

Sir size , thikness plz tell me

[@user-bu7wy7xy3n]

magkano po ang ganyan?

[@sraghu2898]

How many gallons did you used for this project

[@elyseruben4143]

If I had to guess I would say 40 to 50 liters at least I have done many epoxy tables and there was alot of open space on this table...maybe more??

[@Iwatchyourvideos]

DIY if you have a $30000 shop and $10000 in tools!

[@Beebop-ow9ge]

So you’re saying there’s a chance

[@Jacapojacapo]

😂😂😂you two really got me!

[@shaunparsons9610]

The gantry on your sled flexes and the wheels lift up. There's no way that's 100% flat or level.

[@radow869]

A front door would be cool.

[@storyteller3243]

Omg I'd love that

[@Imcat788]

Do you live in the United States?

[@diywithgreg]

South Africa

[@aaronfreeman8436]

Question: why is it you didn’t feel like you needed to put braces under the table like other KZbinrs do? I agree aesthetically it would look bad on this table because the beautiful transparent epoxy would show them. But apparently (I don’t really know) the wood warps over time. Which seems logical.

[@diywithgreg]

Our steel legs has a supportive structure underneath

[@aaronfreeman8436]

@@diywithgreg thank you 🙏

[@buildandmakewithnila]

explain how you used length X width X height on an irregular shape OMG

[@StringBanger]

It's an average..

[@JohnDavis-qw3he]

Can I, or Hollywood have a room,walls and floor like that please. For a nightclub room in the lounge.🤔

[@ZainubRassoolKhota]

😂😅

[@gst4043]

7000 dollars in isa

[@jqlmanufacturing9129]

step by step, but no narration? board is warped, severely. maybe talk through that so the new ppl to WW can fix their issues when they come across them.

[@diywithgreg]

Have many other videos going into our builds

[@jqlmanufacturing9129]

@@diywithgreg love it

[@yannickmestres2493]

sans protection c est du n importe quoi

[@ooxOBHOxoo]

Why did you have to ruin it with carving your brand on it ? At least put it on a hidden place.

[@diywithgreg]

Does artist sign their work at the back of their art?

[@ooxOBHOxoo]

​@@diywithgreg mate, although it's a nice table, it's still a table. "Art" ? Back to reality plz.

[@diywithgreg]

So you only see art as someone that paints something on a canvas?

[@ooxOBHOxoo]

@@diywithgreg What I see is someone who ain't worthy of my time, so keep branding you work if it makes you feel better about yourself. Mr great artist.

[@diywithgreg]

Okay no wait a sec. You compliment me on how beautiful the table is, and complain on our branding methods thats not according to your taste. Then all of a sudden im not worthy of your time anymore, sounds like we need to have this conversation once you have grown up.. so let me know once you have.. #(please do continue to comment like a non grown up, because it helps with the KZbin algorithm) ✌🏻

[@JohnBrown-cn9oh]

Lol do it yourself it says...

[@powermud1]

How you can put ...DIY to this is laughable ...

[@rcairflr]

@22:19 > To do that without a mask is just plain stupid...

[@mim2046]

Don't you mean 100% flat and not level? There's a big difference

[@buckkw5108]

You're fired.. I'm lookin at that slab wiggle and wobble while you "attempt"to flatten it..

[@diywithgreg]

Wiggle wiggle wiggle..