DJI Inspire2 3D Printed model

[@Apocalypse_30]

From where I can get the files for this drone

[@andywillcya]

Any chance you have information on this build? Amazing job!

[@zdenek620]

A more detailed guide is being worked on.

[@stuartfrancis9183]

@@zdenek620 guide availible yet? Can donate towards it

[@zdenek620]

@@stuartfrancis9183 OK, I'm preparing instructions. The image of the exploded model is used for composition and bearings and other data are written in the description.

[@marcobencomo3915]

It doesn't look like the thingiverse link is working. Was it removed?

[@anthonypsantos]

Hello there, just wondering if you included the parts list in your files such as screws? The gimbal connector you used is there a part number I can look up? Thank you I look forward to your reply and keep up the good work!

[@zdenek620]

Good day. I did not write a summary of the parts in the files. This is at the discretion of the builder. I used M2.5 and M3mm screws, as needed. Servo for arm stroke 20Kg 360 °, trapezoidal screw with nut. As a gimbal connector, I used two sockets for a 20pin integrated circuit.

[@marcosrocha7526]

como ficou seus ajustes de ganho PID?

[@dronesvisionsaeriennes]

Hello, Zdenek, very good work from your side. For my part, despite my many hours of research on the net, the "PinChangeInt.h" library remains obsolete..! Would you be kind enough to share your arduino program so that I can finally raise/lower the arms of the drone? Cordially Philip

[@ryanthorp9016]

i have bought your files for this on cults do you have a complete bom for it so i know what i need to get for it

[@nantatech3563]

hello sir,can i get this product,i will buy it compleate model plus motor,how much,can u send to indonesia

[@dronesvisionsaeriennes]

Very nice jon, excellent ...what kind of battery do you used ? thank, happy flights Philip

[@zdenek620]

Hi, I used a 5200mA 6s battery for 360kv motors, 13x5.5 propellers

[@iamvinsblack]

How was the extra compass (with gps) shielded? A high compass error occurs.

[@zdenek620]

Sorry I'm ill as possible will be files on Thingiverse

[@davidecaputo5488]

great!

[@davidecaputo5488]

if you want to send me the stl this is the email [e-mail] thank you

[@wheelsonhills6461]

Thank you sir

[@dronesvisionsaeriennes]

Hy Zdenek, i always an issue to move arms up/down due to arduino code...since weeks....Do you have one thats works properly...Thank's a lot Philip

[@nadunmenaka9850]

Sir can you give me the circuit of this drone here?

[@miroslavkubin9348]

Ahoj Zdeňku no tak to je masakr. Fakt hustý.

[@zdenek620]

Ahoj Mirku , byla to makačka to nakreslit, ale myslím, že se to vyplatilo.

[@孙郑]

[e-mail]

[@michellyrodrigues7737]

Olá bom dia com qual preenchimento em % você usou pra imprimir as peças? Ótimo trabalho comprei seu modelo, tentar imprimir agora obg 😁😁

[@zdenek620]

Oi, este é um motor diferente monta e T nos ombros um preenchimento maior, por exemplo, 50% - 65%. 30% é suficiente para a fuselagem. Para que não seja difícil.

[@ot_FTW]

hi Mr. Seky.......... great work ...........are the stl files available for download or purchase ?

[@nadunmenaka9850]

Sir, make a video on how to install from scratch

[@aviationRCfly]

I am facing some problem

[@zdenek620]

What do you need to know ?

[@casadioDesign]

I also made a 3D printed drone, but that's insane!

[@aiueo1157]

Sir can you explain how the servo works?

[@zdenek620]

Hi Servo I used: www.aliexpress.com/item/32943529775.html?spm=a2g0s.9042311.0.0.27424c4dB7WHt9

[@aiueo1157]

@@zdenek620. Thank you sir, can you explain in this section 2:32 I still don't understand how the mechanism works

[@zdenek620]

@@aiueo1157 the mechanism controls the trapezoidal screw from the 3D printer, which rotates the servo.

[@aleixclemente6170]

můžete vložit tiskové parametry dílů pouzdra? hlavně proto, že existuje mnoho míst, kde se stěny nesetkávají v. Děkuju

[@uandeleon290]

Hey how Much Did You spend ti Build It

[@zdenek620]

I haven't calculated it exactly, I've been building it for a long time. But about $ 300

[@uandeleon290]

😯😯😯 That's Not that Much It's Awesome Love It 300 for The quad

[@uandeleon290]

Can You Build Me one Sir🙂

[@zdenek620]

I am from the Czech Republic, how would I give it to you?

[@uandeleon290]

😂 Philippines Its Hard But can You make a Video Of How The Arm transform and What Parts Did You use Because I really Wanna Build My own And I wanna Be like Yours Pls🙂 make a Video Of How to Build It Just make a Video Which Shows What Motors How The arms Works Pls make One🙂❤️

[@zdenek620]

@@uandeleon290 That's really far :-), I'll try to shoot a video. I will not disassemble this model, I would have to build another one :-) I'll do something.

[@zdenek620]

@@uandeleon290 kzbin.info/www/bejne/q6KZnmigmcaDepI

[@nadunmenaka9850]

Sir, make a video on how to install from scratch

[@jaymedina7791]

hi! are the stl files for sale? cheers!

[@zdenek620]

Yes here - cults3d.com/en/3d-model/game/inspire-2

[@pamathsaminda5834]

can i get a way to contact you because i need some details on this project i am pleased if you help me on this project

[@zdenek620]

Write me an email.

[@pamathsaminda5834]

Can i get your mail adress

[@justoramonherrerosimal9446]

Hi. can you put the link of the 3d pieces? Thank

[@uandeleon290]

This is far one of the best clone

[@zdenek620]

Thank you very much

[@uandeleon290]

No Don't Thank me Thank you so it is possible to build a match size clone why other clone smaller like a mini replica not the same size as the real one

[@zdenek620]

@@uandeleon290 Yes it is, I tried to make the most faithful copy possible. I only did it based on photos I found on the net. I did not have access to the original. Thank you for a nice review.

[@uandeleon290]

And You did great

[@uandeleon290]

I hope There's Someone selling copies like that so cool copy just some small finish it's the best copy

[@HamZty]

I bought this from cults.. it would be great if you can tell me how long the carbon tubes are :)!

[@zdenek620]

I'm sorry, I already added it to the description of the model. 22x20mm length 390mm, 25x23mm length 200mm, 8x6 length 210mm

[@HamZty]

@@zdenek620 thank you so much!

[@HamZty]

@@zdenek620 i have another question: can you post a picture or explain how to put the inner t pieces together? And what about bearings? I really enjoy your project but its quite hard to understand the whole construction

[@zdenek620]

@@HamZty The inner T-piece is simple. The bearing MR128ZZ - 8x12x3.5 mm is fitted on each side, the shaft is an aluminum tube with a diameter of 8x6 mm. A trapezoidal screw for 3D printers with a nut is used to lift the arms.

[@HamZty]

@@zdenek620 i am stuck at the Center of the Model..i dont know how to connect the servo with the trapezoidal screw and which other compenents are needed to get the arms lifting. Can you make a Video or Share a picture of the Details please?

[@mingli3787]

为何不继续更新了呢

[@nipunagunarathne4882]

How long did the print take and how much filament did it take for this?

[@zdenek620]

Stl files can be downloaded here: cults3d.com/en/3d-model/game/inspire-2

[@dxtechnology4078]

Please send me designs for 3D printed file

[@dxtechnology4078]

Please please send me file ([e-mail]) my email

[@kenistanmoraes]

Awesome

[@sangeethrajapaksha629]

Brushless motor kv?

[@zdenek620]

Motor 360kv

[@mingli3787]

好久没更新了

[@mingli3787]

完美

[@ВасяКовтун-щ5с]

Je ozdobený, jsi skvělý. Dal jsem dohromady první verzi. Po tom, co jsem viděl, se chci pokusit sbírat ty tvoje !!! Pokud můžete sdílet STL nebo 3D výkres, budu vám vděčný. Zaručuji, že vaše soubory nikomu nepřenesu !!!! "[e-mail]" Он прикрасен, Вы молодцы. Я собрал первую версию. После увиденого хочу попробовать собрать вашу!!! Если можете поделитса STL или 3D чертижом, буду вам признателен. Гарантирую что некому ваши файлы не переброшу!!!! "[e-mail]"

[@zdenek620]

Stl files can be downloaded here: cults3d.com/en/3d-model/game/inspire-2

[@krystofpojer2670]

Dobrý den super práce. Chtěl jsem se zeptat zda by bylo možné poslat soubory pro tisk. Už se 4 dny snažím vymodelovat díly ale nemám čeho se chytit. Mail [e-mail]

[@zdenek620]

Taky jsem to dělal jen podle fotografií. Přístup k originálu je tady nemožný. Soubory jsou ke stažení tady @t

[@harimeruva6660]

అది రేటెంత నా