6:20 - what are the purple and blue diamonds appearing on the screen when you pan around?
@STRThermal8 ай бұрын
Those are pinpoints I’ve dropped at other locations. Pinpoint How-To for DJI Pilot 2 - DJI Mavic 3T 3E 3M Drone kzbin.info/www/bejne/Zp-5p32tmZecfLc
@ralphqueener8222 Жыл бұрын
Does the mavic 3t record all this data to the sd card, just like you show it here, like speed , altitude, ect? If it don't how do you get it to look like the one you are showing?
@STRThermal Жыл бұрын
In the screen recording, yes. But it does not show up in the raw recordings on the drone.
@STRThermal Жыл бұрын
Update…You can add some additional telemetry to the screen recording and recordings/images on the drone. I think it’s just the GPS coordinates. Go to the camera settings and timestamp/customize timestamp.
@kungfoochicken086 ай бұрын
@@STRThermalOn the regular Mavic 3, there’s a separate file for each video file that syncs up with your video. In most media players, you can select that file as the transcript for the video and it will print the timestamp, location, altitude, ISO, and a few other metrics.
@muhammadfahmib.muhammadisk68552 ай бұрын
How do you switch from normal to thermal mode, which button?
@STRThermal2 ай бұрын
Whatever your camera change button is…you can set a custom button. I have a video for that. You should also see, on the left side of the screen, buttons that indicate the wide, zoom, or IR(thermal) for switching cameras.
@STRThermal2 ай бұрын
Custom controls…I have my camera change using the 5D button(wide to zoom) and the c2 trigger for visual to thermal. JZ T30 Spotlight - Custom RC Pro Controls - DJI Mavic 3T 3E Enterprise Thermal kzbin.info/www/bejne/bKG0YXSNpcSZmMU
@garybarnes87437 ай бұрын
I can't seem to get my IR camera below 2x. I see your moving out to 1x. in video. What am I missing that I can't go below 2x?
@STRThermal7 ай бұрын
Notice the zoom indicator in the top middle of the screen says 2x. The slide indicator is for the main zoom camera. The IR is upsized from the base image to the match the 1080p(on the controller screen) image of the visible camera. If you download IR images to the controller, you can see how small they are on the controller image viewer, for comparison.
@garybarnes87437 ай бұрын
@@STRThermal Okay, Thanks for the info and fast reply
@tyef5725 ай бұрын
I just got a 3 t , and I have a very noob question. When I'm in thermal , and I take a picture, it takes it with the visible light camera. What am I doing wrong ? What setting am I missing ?
@STRThermal5 ай бұрын
Go to the CVI indication on the top right corner of your screen. C is current/screen view in 1080p, V is visible in 4K, and I is infrared/thermal in 640P. Select which you want to capture(this affects video and photos stored on the drone but does not affect screen-recordings and screenshots stored on the controller). I usually have all 3 selected. You can always delete what you don't want later.
@jorisbonson3867 ай бұрын
Can you overlay thermal image over normal image and zoom both together? If so what zoom distance?
@STRThermal7 ай бұрын
I assume you mean like the older Mavic 2 Enterprise(the Dual did this, I am not sure about the Advanced). The Mavic 3 does not do the overlay. But you can use side by side(the SBS button in the top right of your screen) which shows the thermal on one side of the screen and the zoom on the other. I'm not looking at my controls, but you may have to select link zoom(looks like two rings linked together in the top right when in the thermal view) before you get the SBS selection. I personally don't use the side by side as I don't like the waste of screen space, but I think it can be helpful for new thermal pilots to gain spatial awareness when in the thermal view. Hope that helps and answered your question.
@tdr.deerdrone Жыл бұрын
Yea probably should have ya to check up the hollee to the right.. did u scan that just flying in or out?
@STRThermal Жыл бұрын
What do you mean?
@tdr.deerdrone Жыл бұрын
Sorry I copied and pasted wrong thing. Lol I was wondering how to set the alarm on when something on the screen is in a certain temperature range
@STRThermal Жыл бұрын
@@tdr.deerdrone In thermal view, drag your finger like your making a box and the box will appear. Click the bell icon to turn on the temp alert. This will alert when the temp is over your setting. Otherwise the box shows the coldest and hottest pixel. Isotherms(can turn this on/off from the palette menu) is another method for limiting the temp response of the sensor but for deer I would not suggest it…it could hurt more than help.
@tdr.deerdrone Жыл бұрын
@@STRThermal why is that? At what temperature would you set it?
@STRThermal Жыл бұрын
I don't use either feature. I feel like everything pops well enough purely by visual indication on the screen.
@weekender38 Жыл бұрын
When a person is first starting out, never flown a drone, do you apply for part 107 first or buy a drone first?
@STRThermal Жыл бұрын
You will only need the part 107 if you will be flying for business purposes in the national airspace. If you are flying purely for recreation, you don't. Recreational flyers still need to pass the TRUST exam. Additionally, recreational drones above 250 grams need to registered with the FAA. Visit the FAA Drone Zone for the details. faadronezone-access.faa.gov/#/
@markbailey7519 Жыл бұрын
Part 107 is required if you use a sUAV for monetary gain. For hobby / recreational use, take the simple free online TRUST course to obtain that certificate. Keep educating yourself and stay informed on the subject.
@billweis411210 ай бұрын
Just to clarify, monetary gain is not the key (although often times it is) to needing part 107. If it is not recreational, you need part 107. Example, if you create a video for a realtor and don't charge for it, that is not by definition recreational flying and requires a Part 107@@markbailey7519
@markbailey751910 ай бұрын
Yes. That video footage would require the pilot to be certified, as the relator would be using it for its business purposes.
@STRThermal10 ай бұрын
@@billweis4112 You are correct.
@MikePizzolatt9 ай бұрын
Great video, would these Mavic 3T settings transfer over to the M30T? thanks and keep them coming. Why did you choose the 3T over the M30T. thanks. i'm looking to get into thermal drones and looking at a M30T right now. Haven't pulled the trigger yet. thanks again
@STRThermal9 ай бұрын
Hey Mike, glad it was helpful to you. Most settings will apply to the M30T. The temperature range(high/low gain) and color palettes for instance. Here is another video that should be helpful in your decision making. Ultimately I did not think the extra features(zoom and IP rating being the ones that really matter) justified the extra cost(for me). I also looked at it from a payback(revenue versus investment) perspective and even considered that the influx of deer recovery across the US could affect the stat regulations. So, I chose to start with the M3T. I am in no way disappointed. kzbin.info/www/bejne/m2LWmn-wr66apcUsi=ODLGdEW2tANZWopO
@fly-r6247 Жыл бұрын
How to record an image from the controller so that you can see the settings etc.?
@STRThermal Жыл бұрын
A “screenshot”, back button + photo shutter button, will take an image of exactly what you see on the controller. Likewise, a “screen recording”, back button + record, will take a video of what you see on the screen and will include Audio from the internal mic.
@albertchang108 Жыл бұрын
I’m borrowing the M3T right now and this is so helpful. Thanks for the informative yet concise vid!
@STRThermal Жыл бұрын
Glad it was helpful!
@gunnar455411 ай бұрын
What kind of daytime temperatures are you able to work through for mammal location? I'm in Australia and will be using these for Koala surveys, so obviously smaller animals than Deer, and it gets hot here so the usable window of the day temperature wise is a peak consideration of mine. I'd really appreciate a response, and how much does the temperature range adjustment allow for making it usable during hotter periods? How hot was this day? Was it a 90f day? THANKS!
@STRThermal11 ай бұрын
Hey Gunnar, Koala surveys is a cool usage of the M3T. This video was filmed around June 10 and we had high temps during the day of about 90-92F and sunny. I filmed this and my SAR workflow video on the same day around 1 hrs or so before sunset and from watching the video there may have been some clouds on the horizon helping conditions. The issues with flying while the sun is up is that the suns energy quickly throws off your thermal picture due to the way every object is heated by the sun or reflects the suns energy. Bright sunlight can quickly make your trees light up and your koalas disappear(blend in). We always recommend doing any thermal work while the sun is low(late evening, early morning, or at night) or on cloudy/overcast days. I do deer surveys on, preferably, an overcast day because I want to know the daylight bedding locations. We do carcass searches in late evening or during the dark(working in daylight can prevent your need for a spotlight). But most of my videos are shot in the light just prior to sunset for best thermal results. With practice you’ll understand the times that work better for you.
@gunnar455411 ай бұрын
@@STRThermal Thanks for your response. I just purchased a M3T and look forward to testing it here in AUS. Take care.
@STRThermal11 ай бұрын
@@gunnar4554 I have lot of videos that apply to what you do. But if you have specific questions, you’ll find my email on the channel homepage. Dont hesitate to reach out.
@deadwater87 Жыл бұрын
How well does it work trying to find one bedded down in the woods during the fall ?
@STRThermal Жыл бұрын
The primary issue is the tree canopy. Sometimes I can see the heat signature on the thermal and not be able to find a large enough break in the canopy to put eyes on the deer. But all depends on what you're searching in.
@deadwater87 Жыл бұрын
@@STRThermal so if most the leaves have fallen it’s fine ? I have one showing up Saturday
@STRThermal Жыл бұрын
@@deadwater87 Definitey, I just mean in the absolute thickest hardwoods with leaves still on.
@deadwater87 Жыл бұрын
@@STRThermal perfect ! Thank you . I’ll bug you some more when I get mine up in the and have some questions 😂
@UltraHawke18 ай бұрын
Any info on how to download videos photos to your phone on the 3T, I’m struggling. Thanks
@STRThermal8 ай бұрын
You can use One Drive, Google Drive, or other file sharing app installed on the controller and phone. Is video shows One Drive. DJI RC Pro and RC Plus - Transfer or Sharing Files Wireless Method kzbin.info/www/bejne/hX66dKx6mK6MnNU
@ssmarsch Жыл бұрын
Thank you! Have had the Mavic 3 since it came out. Ordered this Monday night to help look for a lost dog. Want to be ready to go when it arrives. This will help a lot! Thanks!
@STRThermal Жыл бұрын
Good luck!
@jonmike316 Жыл бұрын
Give us an update!
@equious84136 ай бұрын
DID YOU FIND THE DOG!?
@ralphqueener8222 Жыл бұрын
Ok, I'm new to this, can you explain the difference between raw recording and screen recording and how to get them ?
@STRThermal Жыл бұрын
Download the RC pro manual. So you have your video record and photo buttons on the front/top of the controller. Those will record the images or videos on the drone(dcim folder on the sd card) in full res(according to each camera’s capability). When you hold the back button AND click the record/photo button, you get a screen recording or screenshot. Those will save on the controller(Files app, Internal Storage/Movies and Internal Storage/Pictures/screenshots folders)
@MannyDer Жыл бұрын
I've never gotten mine to go to a 1x zoom on the thermal. I even just tried to do it with link zoom
@STRThermal Жыл бұрын
I think this has to do with the difference in resolutions, the feed from the drone to controller is 1080p, the thermal is 640p. So the thermal image wouldn’t fill up the screen if shown in 1x. That said, 2x on thermal looks like you are actually closer to the ground then 1x in the wide(zoom) camera. But I think the intent is that the thermal image fills up the controller screen. If you download and review images from the drone(set CVI to get all three variants) it may make more sense. This is my own understanding but I haven’t researched it past what I’ve shared here.
@WW5RM5 ай бұрын
Something ive noticed is when you click Link Zoom the difference between them will be locked. When it first starts / boots up the default is 7X. So when you switch between Thermal and Zoom it will jump to that 7X. Which could be useful as long as you know that. Thus saving time zooming all the way in i suppose. But as STRT said the Thermal is locked to 2X to fit the screen. I personally zoom all the way back to 1X before i Lock Zoom. But if seconds count i suppose leaving it locked to 7X could save time over the duration of a full flight. It just seems more appealing to the eye for video to me. For people watching a video zooming in seems more appealing, i think. But for SAR leaving it at the default 7X might be the best option.
@SzkolaPartyzantow18 күн бұрын
Thanks. Great tips.
@STRThermal17 күн бұрын
No problem!
@elysianbridgetownaccommodation9 ай бұрын
Anyone have a tutorial for this on a 2 advanced? Need to set it for missing dog search
@STRThermal9 ай бұрын
I don't have a M2EA, but I know it has a high and low gain mode based on notes in the manual....the manual does not instruct how to change between the modes. I suspect you would find these in either the camera three bars menu, the main three-dots menu, or the palette menu.
@russellaradine9786 Жыл бұрын
Excellent tutorial. Just what I was looking for. My thermal setting are all messed up from me playing around while looking for deer at night.
@STRThermal Жыл бұрын
If these setting don’t fix you, might want to reset the camera altogether and try these basic settings again. Also, turn isotherms(find the thermometer icon on the palette window) off. Good luck!
@STRThermal10 ай бұрын
If you want to be a deer recovery drone pilot or are just looking for a thermal drone, get your DJI Mavic 3T or Matrice 30T at... thermalhunting.com/collections/thermal-drones Tell them Savage Tactical Recon sent you!
@jbellafato Жыл бұрын
Great tips. Watching your videos I’ve noticed I probably live within 10 miles of where you’re filming the way the crow flies. I am new to the Mavic 3T. I’m finding this very helpful.
@STRThermal Жыл бұрын
Awesome dude. Glad you’re finding it helpful.
@zsoltnemeth80114 ай бұрын
Great instructional video, lots of easy to understand info. Thanks!
@STRThermal4 ай бұрын
Glad you enjoyed it!
@jorisbonson3862 ай бұрын
Why turn off Isotherms? Surely that's pretty much made for this job isn't it? Finally just got one of these drones :)
@STRThermal2 ай бұрын
You're gonna love your new M3T!! I have done a lot of testing to understand the function of the isotherms and the normal auto scaling that happens when isotherms aren't on and active. My results are that there is more risk of missing things(humans and animals) if isotherms are set wrong(even by just a degree or two) than headaches associated with false positives(logs, rocks, etc) if isotherms are turned off. I also have come to trust the system enough to know that when an human or animal is in the frame, the other warm appearing objects(like when all the tree tops are pink in tint pallette) will suddenly appear colder. Isotherms, in my opinion, can come in handy when you want to look at very hot things on a very cold background, or very cold things on a hot background. Think hot boiler, generator, etc on a cool, ambient background. In both these instances where the system would make the extreme temperatures only cover a small range of your color scale, isotherms will let you focus the full color scale on the small range of temperatures you're interested in.
@jorisbonson3862 ай бұрын
@STRThermal thanks for the awesome and detailed answer mate, that's great 🙂👍
@Bbawla20 Жыл бұрын
Thanks!
@Bbawla20 Жыл бұрын
Definitely helpful and well explained. Have had mine for about a week now getting ready to take it to the lease. Really appreciate it.
@STRThermal Жыл бұрын
Thanks so much!
@ernieschatz37834 ай бұрын
Aaaaaaaaand, still no real-time GPS lat/long readout. Still have to putz around with taking a still then looking at the geo stamp in the file info...DUMB! Nothing like making a rescue crew jump backwards through their butt to get a lat/long.
@STRThermal4 ай бұрын
@@ernieschatz3783 Actually you can have GPS coordinates showing on the screen. I’m not looking at it right now but in the on screen camera menu you can turn on “timestamp” I think it is and select what shows up in the timestamp. You can also move it where you want it I think. This is helpful so your screen recordings or drone side recordings will always show this info. I can double check the instructions when I get home. You can also drop a pin and look at the pin coordinates. You can share those coordinates(a Google maps link actually) with the share icon….this was an added feature after making this video.
@ernieschatz37834 ай бұрын
@@STRThermal Very nice! I remember watching a demo video several years ago where a search and rescue guy was demonstrating how to get the lat/long from a Mavic 2 Enterprise and it involved downloading the image file and getting GPS info from the file metadata. Horribly inefficient method when time is of the essence
@STRThermal4 ай бұрын
That sounds terrible lol. So from any camera view, click the “slider” menu button, then the three dots, then turn “timestamp” on, once timestamp is on, you can select “customize timestamp”, from there you can select what you want(aircraft info, date, time, coordinates+altitude, custom text, and timestamp location on the screen).
@STRThermal4 ай бұрын
That sounds terrible lol. So from any camera view, click the “slider” menu button at the right top of the camera view, then the three dots, then turn “timestamp” on, once timestamp is on, you can select “customize timestamp”, from there you can select what you want(aircraft info, date, time, coordinates+altitude, custom text, and timestamp location on the screen).
@STRThermal4 ай бұрын
Another thing, if you review an old flight record, you can see the coordinates at any given point and also use the pin icon(lower left of the screen) to pin a location in the flight path(your flight path may show that you hovered and circle a certain spot for instance). The pins made in this view will be named for the flight record file name and the timestamp of the aircraft location.
@BrianCrump0078 ай бұрын
Great video. Thanks. Just got this drone.
@STRThermal8 ай бұрын
You're welcome. Welcome to the M3T family.
@fltmed Жыл бұрын
About to get one of these and this is exactly what I needed to prep for using it. Thank you very much!
@STRThermal Жыл бұрын
Very welcome!
@fltmed Жыл бұрын
@@STRThermal Just got it in today. Sat in my office watching your video to help me set up things. Again, thank you very much!
@STRThermal Жыл бұрын
@@fltmed Awesome dude! Let me know if you have questions.
@fltmed Жыл бұрын
@@STRThermal Thanks! Did a short flight about an hour ago. Probably will head up to the hunting camp Saturday and practice. Need to find where those darn hogs are hiding, LOL
@allamericanadventures Жыл бұрын
Great video thanks for putting it together!
@STRThermal Жыл бұрын
Thank you my friend!
@billrose4975 Жыл бұрын
Another great video from STR!
@STRThermal Жыл бұрын
Editing the next one for you!
@tdr.deerdrone Жыл бұрын
Yea probably should have ya to check up the hollee to the right.. did u scan that just flying in or out?
@thehalfinchwrenchcrew5245 Жыл бұрын
That's really cool man I'm looking to buy the m3t for our bigfoot hunting sagas lol and for broll footage and I live I a small town and if there's ever a search and rescue I will be ready to deploy to assist anyway we can. Awsome video very good explaining. Liked and subscribed