dji Mavic Air battery repair and flying drone with repaired batterys.

Programs I used. Im not a expert so use at your own risk!
www.dji.com/downloads/product...
DJI Assistant for battery firmware update
Then
DJI Battery killer program. master-club.org/drone/software/
Music
Get What You Waiting For by Daniel Meade and over 1M + mainstream tracks here go.lickd.co/Music
License ID: vLnOwyEmnjJ

[@ivanashley5943]

I just used my regular battery charger (connecting + to + and - to - with simple wires) to charge a cell that was below 2V up to 2.1V. The other two cells were already around 2.1-2.8V. This allowed me to run the software and unlock the battery. The regular charger took care of the rest. I didn't perform any welding or other complex procedures like the ones shown in the video you mentioned. Just so you know, I used the software and equipment demonstrated in the "Battery Mavic Air Repair (Remove Permanent Fail)" video.

[@prairiebuilder]

Great video Stan. I used the information you provided in this video along with other videos and written instructions I've looked at to successfully revived two of my Mavic Air 1 batteries. The only thing I did differently than your method was that after I slow charged the entire battery above 12v, I removed the charging wires I soldered to those two terminals and then closed the battery back up and proceeded to use the debug board. I hooked up a positive and neutral lead to a small 12v sealed battery to activate it for programming, but it reduced the amount of soldering required and meant that I didn't have to open the battery back up to remove the positive lead after reprogramming the chip. Thanks again for inspiring me to have the confidence to do it myself. BTW I like the artist you had playing while you were testing and soldering the battery.

[@mattyttv]

bro, you should charge each cell one by one with 1S lipo charger to 4.2v each. cells need to be balanced and rate of charge not more than 1-2C. You really gave these batteries a heart attack. Surprised that u did not start a fire.

[@RednecksGoneWild]

KABOOM !

[@Loverboy_Bernice1977]

Still a great drone! ❤❤❤🎉🎉🎉😊😊😊. God bless you

[@Tr4Maranhao]

Does anyone knows if is used tungsten solder to sold the cells in case of change them ? A friend sad to me that the solder to use has to be for aluminium.

[@kgcustomscalemodles4762]

I just got a manic air got it cheap looks new came with 3 batteries one don’t work can you fix mine for me please

[@BudzFPV]

What program do you use sir?

[@MrDlow6977]

Really appreciate the info...I'm hoping this works. I'll keep ya posted...plus gonna try the glue gun instead of soldering.Hopefully all goes well...😂

[@stanwoomer]

Good luck 👍

[@laaganvlog478]

Tested po sir? You can edit the voltage,?

[@stanwoomer]

I don't understand the question, sorry.

[@onurmanaz7628]

Mavic mini battery repair???

[@laaganvlog478]

Try my 3 battry dead

[@pawanbajpai711]

Hi sir, I followed exactly same step as your video, after charging battery cells and connecting jumper, drone got power on and I manage to update firmware too. After updating firmware I tried to reset/unseal using CP2112 but it still shows error saying ERROR: Could not perform SMBus read 0x00. Any idea what else I can try to revive it? Thanks in advance:)

[@MrNdinotenda]

Did you manage to find a solution. I am having the same issue

[@TheBelfastBikerOfficial]

​@@MrNdinotenda I had this issue too a few months ago. I just needed more Voltage.

[@mikelowsrchobby6863]

If I send my battery to you, can you fix it for me? I'll pay you

[@rebeccasheikh548]

promo sm

[@maccarnes8736]

Do you have a way I can contact you? Very interesting video. I have the DJI Spark with the same batteries.