Amazing eyes you got. I am impressed you can remember what part goes where - not least what _screw_ goes where!
@vikumvinod36637 жыл бұрын
good job my friend. super flying. thank you. vikum from sri lanka
@publosprimos7 жыл бұрын
Crazy flying skills 👍🏼
@pagpag1987 жыл бұрын
hell of a pilot. afraid u will repair it again soon.
@youser237 жыл бұрын
hehe :) i'm not the one who broke it in the first place!
@plaidass17 жыл бұрын
Thanks for doing this video. Very helpful. Also you are an awesome pilot!
@alexvite50652 жыл бұрын
I replaced my ribbon cable with a new one. I met started well and I was happy it worked. Unfortunately, after flying for 20min, the same gimbal motor overload issue reappeared. And the gimbal gets hot really fast, only after starting the drone for 30sec it’s already very hot. I opened the gimbal again and tried fixing the ribbon cable. But it didn’t help. Any idea what else I could do? Replace the whole gimbal? Buy another ribbon cable from another company? Thanks
@petrjanek77636 жыл бұрын
very good job, it helps me fix my gimbal too
@Daimali6 жыл бұрын
This rflex fix saved my 3 hour of struggle
@Daimali6 жыл бұрын
But my horizontal motor is not working also my video is also not working i think i have loss any cable ??
@herreraid20105 жыл бұрын
Good job man. I tried mine but I got no image 😂 that flying though.... dang!
@YeshuaDisciple9164 жыл бұрын
What tools do you need to disassemble? Besides the hex screws, what kind of plastic clip removers, or whatever you call it, does one need? *PLEASE* get back to me ASAP* !! Thank you. I need to do a repair, however, I'm not sure exactly what it is I need. *PLEASE HELP* !!!!!
@youser234 жыл бұрын
just a screwdriver with the different tips
@lattcg54617 жыл бұрын
Thank you so much for your video . I am going to fix my Mavic too .Hope my mavic can fly again.lol
@loiclaforet7 жыл бұрын
Sorry for my poor English expression ... I crashed my pro mavir in a tree and the elastic that hold the camera are torn. I saw on one video that someone repaired it with string. Shall I dismantle everything to try a repair like him? Is there a way to get these elastics? Thank you for your answer
@ferzun20027 жыл бұрын
Perfect for me !!!! thank you .... :)
@thomthorne73064 жыл бұрын
What about the black silicon that holds the ribbon cable connections in place from the factory. Do you not have to reapply the Silicone Glue when installing the new ribbon?
@youser234 жыл бұрын
since its not critical for flying i didnt bother. so far it's not been a problem
@ayeapprove Жыл бұрын
How did you get the sticker from the top shell onto the new one?
@natepate61174 жыл бұрын
that gets a subscribe from me . and i groove on the flying skills! Can you tell me what mode do you fly in full and dumbed down or full speed mode? or what ever one because it seemed real responsive to stoping and turning without a lag.? please let me know your settings .gain nice flying skills
@youser234 жыл бұрын
thank you. i'm pretty sure it was normal P mode. definitely stock gain settings.
@terryedgerton75136 жыл бұрын
Gday Peter. Some time ago you did a video on Mavic Pro prop guards. Is there a prop guard for the Mavic Pro that operates with the low noise props? Cheers. 🇦🇺
@Themightymoze7 жыл бұрын
Thank you for this very informative video!
@wynandvanzyl87987 жыл бұрын
Very helpful highly recommended
@MrBerenguer673 жыл бұрын
Hi thank you four your video I have a Mavic Pro and now is Said remove the clamp the camera is hoverloding what you thing it is thank you very much
@youser233 жыл бұрын
this will come up if a motor current is too high for example when something is blocking one or several gimbal motors. or if you have som sort of short circuit in one of the motor phases.
@claudiocosterni64887 жыл бұрын
In your opinion, would be possible to put this gimbal-camera on a custom frame instead of using the usual Gopro or a bigger camera? I am thinking about this, but I do not have the expertise to do it. Would be a good solution to have a lighter frame, size 680 or bigger, to have more flight time and still good enough pictures and video quality and funtionality.
@youser237 жыл бұрын
the thing is that the mavic camera definately needs the mainboard of the mavic to work. So you wold have to swap a whole bunch of pcbs and electronics from the mavic frame to your other frame. i dont know if you would still have the benefit of the weight anymore then
@dashbrothers7 жыл бұрын
from where did u buyed your tools ? my drone just crashed and i guess i have the same problem with the motors also the cable seems a little bit damaged... hope it gets fine..
@youser237 жыл бұрын
you mean the spare cable or the screwdriver tools? cable can be shopped here goo.gl/LyKtE3
@Guytrains2 ай бұрын
I followed this but the gimbal doesn’t have power and no video either
@skycorpspain12487 жыл бұрын
Hello! I have a question. After you change the ribbon cable, is necessary to do a calibration of the camera? or something like that? Thanks you so much!
@youser237 жыл бұрын
if you notice a tilted horizon or something abnormal you should recalibrate - it never hurts to recalibrate
@jahivan7 жыл бұрын
ello guys, long story short, crashed my mavic, powered it on, received overloaded motor (gimbal didnt move at all) i get video tho. Ordered gimbal cable from FS LABS, replaced it, the gimbal moves but i still get overloaded errror and the gimbal doesnt follow controller commands (up / down) Bad cable? something else damaged? Please help, im desperate. BTW, after cable was replaced the camera body is getting extremely hot. is that normal? You know we start to see / feel weird/new stuff when we break something and try to repair it.
@mariaeduardasaraivarodrigu58346 жыл бұрын
Hi. Did you solve your mavic problem? I'm in the same situation.
@pumpupkman5 жыл бұрын
what are the cables (from the drone body) called you are connecting at 12:40 into the video?
@youser235 жыл бұрын
hey. try searching for mavic pro flex cable. and look for one that has only two ends (not like the one im replacing in the video)
@lanzmilay45167 жыл бұрын
How much did you get the broken mavic for?
@youser237 жыл бұрын
it's not mine. i repaired it for a friend
@tahitiprod17 жыл бұрын
good job!
@reqage6 жыл бұрын
If you're a masochist, you may enjoy doing this.
@yusafawi6 жыл бұрын
with kind of flying and wonder u know how fix it..
@danielcorona31907 жыл бұрын
where did you buy the ribbon table
@danielcorona31907 жыл бұрын
cable*
@youser237 жыл бұрын
hi. i put the shoplink in the description goo.gl/LyKtE3
@oviss59466 жыл бұрын
Good Job..
@Abimanyu-zu2eh7 жыл бұрын
Mantap sekali
@bosco56526 жыл бұрын
It will never fly again!
@christopherlaos96117 жыл бұрын
Stop talking like that😡😡😡😤😤😤😤 that's really really annoying