DJI Naza GPS 2nd Test with Failsafe RTH

[@madmax1419]

Hi Ali, the failsave funktion is a really good item in Naza Controller. Today I tried it out and I have to say, you really need balls to shut down the radio during flight. But the copter does what the manual promissed. First it climbed up to 20 meters hight, then directly to home base point, waiting a little and than slowly down to ground. Shortly over ground the ground effect comes through, the copter was a little unstable over ground, a little up and down, but at the end save back down and shut off the motors. That’s really cool and a model saving feature. Thank you for your video, I enjoyed watching it. At this point I want to say Thank You to all Video makers in the world. I‘ve collected my know-how about my F550 by watching videos, identical which language is spoken. I prefer german, english so far my school english let me go, dutch is also understandable ( with a little fantasy) and then it becomes difficult. So far, so good, somebody has solved the problem, is posting a video and the community is richer by getting more Know-how. That‘s really great and it shows, that people around the world, can have fun with this hobby by giving a helping hand. I really love it!

[@TurkeyVids]

I would recommend starting with the F450. I did and it's been great and remains very stable in 10-15 mph wind. The F450 also gives you more options, for example, upgrading to an F550 by changing the plates and adding an extra two motors, arms and speed controllers.

[@gbraga67]

Hey Ali... That was a great demonstration! You made it easy and very confortable to watch. Thanks for flying! Regards from Brazil.

[@OndrejMejzr]

Ali, you provideing realy good channel! what more? Every one who watching your videos can feel that you love it! Nice to see videos like yours!100% by my side...

[@t.rexxer5007]

Ali. Very cool features of the Naza GPS system. Definitely going on my shopping list when I jump into FPV quads. Still perfecting my heli flying skills, but the naza sure takes a lot of fear of loss of crashing out of the equation. Thanks for the informative and nicely done vid.

[@youtubiano2008]

Gracias amigo, eres realmente una gran ayuda para los que comenzamos en esto, muchas gracias por tu dedicacion! Thanks buddy, you really are a great help to those who started this, thank you very much for your dedication!

[@daggad02]

Great video Alishanmao. I have learned a lot from different reviews and how to videos. Your enthusiasm and warm humor makes them even better. Keep up the good work !

[@birdmanbl]

Yep The Naza is the way to go. Failsafe video was awesome

[@breadfansbazaar]

Great video! Very informative for us who are new to the hobby. Thank you!

[@rongarvin8722]

Thats an impressive system! What an awesome thing technology is!

[@GeorgeBonez]

I got mt my Naza-M w/ GPS today! WooooHooooo! Thanks Ali for recommending the DJI-USA site man. I got it in only three days for $399.00. Man I cannot WAIT to get this thing mounted on my quad! :)

[@Saddlebum042]

Brilliant! You are becoming one of my favorite reviewers. keep it up!

[@nerys71]

man that return to home was WICKED cool. I can't wait till I can afford stuff like that.

[@TvstyleVideoPh]

Hello Ali, thanks for putting this all up in video, it helped me lot with the Naza + GPS set-up. I am learning aerial video shooting using a DJI Hexa and Gopro.

[@Afiso]

Nice video men and love how you make it funny

[@teneilp]

I love the way you do the videos, thank you.

[@JtagSheep]

Cant wait to get my DJI Naza F450 Kit !

[@knownoversight]

Love your enthusiasm and passion, great fun, good job...good video, thanks.

[@rogergeorge723]

great video do you have a video that shows how to set the GPS up if you don't then you're going to make one I will be looking forward to it

[@number2pensel]

sick video Ali!! you are the man!

[@CactusJackSlade]

This guy is great!.... and a crack up to watch and listen too!..... good video and information - THANKS!

[@johnrobertson7583]

Hiya Ali. Im sorry I missed your garage sale!! I just recently got 2 "new" multirotors. Both with Naza. A TBS discovery with M-Lite, and a tarot 680 with A2, v2. Set the TBS up tonite...and WOOT....what stable flight!!! I should have paid attention to all the references in your other videos about getting one! The only issue I have now is even though it came with a preconfigured T8J, the IOC wasnt set up. What i see it being used for is to choose a direction for the video platform to point, and then fly along sideways in forward mode. Ive read some hacks being done to make M Lite into V2, seen those references?

[@tattoodrdoke]

Lol you a funmy dude, im looking into something more advanced after owning a ar drone. Ive got a small quad coptor that i use at home to focus on keeping my skills sharp. It looks good

[@stheodorus]

Nice you have it, Nice performance.

[@QuadroRC]

Please read the 6 animated photos on page 21 of the manual, then watch your video again. It doesn't seem to me that you know what the NAZA would do next @ the moment you turned off that transmitter. Cheers

[@anddreas2lair]

Sweet man. That's a solid system!!! I like this copter. Which one is it? I am trying to build one...

[@eastrockaway11518]

Ali . Thanks 4 the video. I am thinking of making one

[@adventureicecream]

That's an awesome piece of kit.

[@probante]

you need steel balls to try RTH by switching off your radio. Nice to see but hard to try!!!! btw great job asu usual Ali.

[@richard76rama]

This has the same controller as sa DJI Phantom. Quite intelligent beast.

[@probante]

I do agree with that but again, you need nerves cause elettronic can let you down any moment..

[@MrMrwilem]

Great info Alishanmao. love your videos man

[@nektariosattitis3841]

again you are the best

[@hillbillypetej]

Wow now that's cool well done just amasing bit out of my league. Hehehe

[@analynliguit913]

Hello sir.. Can you please make a video Haw to set up DJI naza mlite flight controller to flysky Fs-i6s 10ch AFHDS touch screen with Fs-iA 10b reciever

[@jjgonzo66]

Great video extremely informative & helpful,

[@40ozDiRtYHaRrY40oz]

ima move to china to hang out with ali ahah i wish i could i live all the way in michigan nice vid ali !

[@UnderTheRadar1976]

looks like fun i got some helis and planes im not so good on the planes (crash) lol think i may think about a quad

[@Tinnntin]

It´s almost i hear Joe Pesci talking, like you video´s. Keep it going!

[@therealcapecodbob]

Your video was interesting, especially to me, a newbe! Can you tell me what the cost would be for a setup like you have in the video? I'm trying to figure out what all this might cost me. Thanks!

[@kutay_ozkeskin]

I've watched almost all the videos on your channel.. with assambling my naza, it would be very very hard if u didnt share step by step guide.. Hope to have more quadcopter tips and videos :D Tnx alot :)

[@jpthedelawarebeeman6239]

I love all your videos, keep up the good work.What was the RTH Alt set to ?

[@stonelax]

awesome stuff!! how much will it cost to build a setup like this (excluding go pro). Also, are you guys in China?

[@RoboCNCnl]

Hi there... I aske you this question because you seem to be the quadcopter Guru on YT. Im planning to by a DJI naza and flamewheel F550 (for aerial media). I'm really confused in finding a transmitter, and read a lot confusing forums. I'm currently in doubt about the Spektrum DX8, and the Graupner MX-16 HoTT. Can you give some advise? Thanks in advance.. !

[@ViceVersaMusik1]

Hey Ali, first...love your videos man! Umm....I just bought a used futaba 10c and was wondering if you could do a complete video on setting it up with a quadcopter or hex. Also how to erase what the person before me had on the radio,know what I mean? Please help. I don't have manual so I'm trying to get it on my own and if I can't figure it out I'm just gonna get a DX9.

[@maxun1]

Love your videos. can you show me the radio set up in the computer naza sofware, how you set up you futaba 10c thanks. Beautiful. video

[@Cammeraatje]

Hello, nice video.. i have the same one and i am using een tbs discovery with naza gps. How do you program your transmitter? i haven the same ( futaba t10) when i'm turning it off it will not go in failsafe, only by switch.

[@anddreas2lair]

Dude, you're soooo funny :P haha, love how you go under and use it as a fan.

[@Gloch9]

Cool video. How do you activate failsafe by turning off your TX? I can't figure it out?

[@y14rge]

Great video. You answered so many questions for me. 5*

[@Artelian1]

Hi Ali. I need to upgrade the radio (I have DX6) and I wanted the MX-20 hott, but is to expensive now. So..I thinking to buy a "intemediate" radio for use it with hexa before I will be able to biu MX-20. I was wathting the Aurora 9. What do You think about that radio ? Seems the ony one with 9 ch at that price, and not loose more money when I change to MX-20. Nice video.

[@Ec130Rhine]

Hi am thinking if getting the dji phantom with the built in naza & GPS I wanted to know will it handle strong wind like a 450 size cents it's a 330 size? It's has the same motors as a 450 quadcopter will the naza & GPS work with all size quadcopter the same in stronge wind?

[@Umeshsingh-rq8rt]

I am learning a lot from your video to pursue my hobby.Thanks for such an excellent well explained video. In near future I am going make a drone using F330 frame DJI Naza V2 controller. I have seen your video that one has to remove ESC red wire before connecting to controller. My question is why it is so ? Other you tuber connecting without removing red wire. I am totally confused. What is the technical fact. please give your opinion for safeguard of my controller. Thanks and regards

[@alishanmao]

just for safety, you just need 5v from one ESC,

[@guymador]

hi ali, i see you use pluse esc with the naza. what kind of adapter are you using. i have tried connect them straight and it did not worked well thanks, guy

[@CollinRandallOutdoors]

my naza m lite doesn't have a switch for gps position hold, does it? I just have gps mode attitude mode failsafe?

[@Raptor50aus]

Ali , Are you able to connect an OSD to the Naza GPS when flying FPV.?

[@gilbertcollie7108]

This guy is the quadcopter whisper.

[@romanekster]

Are you still flying these days? I started flying in 2013 round about the time dji naza came out. Always used to watch your videos for inspiration! Anyway I still have a tbs discovery but have moved on to 5" mini quads - flying full acro now :)

[@alishanmao]

yup still flying. Also flying FPV Racing and Free Styling but mostly to smaller ones, toothpicks, Whoops. they are more fun and safer to fly.

[@warunaerandaperera]

dear sir can you tell me how to set Rth for naza m lite .i use flysky i6 with f450 frame..thak u very much

[@poeli1]

nice video :)

[@Mickey-P77]

lol dude you are to funny, love your videos.

[@BenHayat]

Ali, which radio do you like the best for everyday flying: Brand? Model? Thanks! ..Ben

[@алтониголденберг]

Hello Alishan, my name is Altoni im from Kazakhstan,So here is a little question for you, how mach this is toy?

[@kenlee6003]

Not so, though, made in China, but the price is not dominant, I want to know if you like DJI products, and think DJI products?

[@QuadroRC]

It would be nice if you could read and soaked up all the informations given in the manual before you do this video. It also helps you to look more like a Profesional.(there are 6 animated photos regards to ARTH which are very easy to understand). People watching your video are expecting to learn things from you. I hope that you would take this as a constructional commend

[@billwelch1177]

that is very cool!

[@sealbay]

Hi Ali i have a question.. i have a Futaba T8FG radio my forced Failsafe is set on a 2 position switch and RTH also works when turning off the radio. But if i try to disarm Failsafe while in flight and regain control the only way to do this is to switch to manual mode. Failsafe switch is not working or turning the radio back on is not working

[@ds.nhaque9935]

i'd like to buy a sencond hand cheap naza combo anh still operation good. where can i buy? because i'm a student in vietnam and i have not enough money to buy a new combo thank you very much

[@maskystudio9193]

incase quad not landimg the last position gps lock.what button can i handle counter again

[@skimowhite586]

mine sucks it hovers nicely but it moves to the side and it doesn't stop it keeps going.

[@cafersas]

hello Ali , tonight finally solve the problem with my motors , basically I did everything again , put my turnigy tgy i10 in airplane mode not quadcopter in that way the mixing and the end points can be changed . The only thing I can do is find satellites , could you explain me the positions in the switches when you start the quad using the manual mode? If I understood the switch A (in my radio) is in manual position and the other switch (IOC) in off position . maybe that make that my quad dont find any satellite, I try it outside in the yard , so is not the house

[@scottfinnie6467]

Hi AL how do you get a live feed from the gopro to a laptop on the ground? thanks

[@RichWinning]

Where can I get that landing skid for my F450 Alien quad? The Naza m Lite holds position before landing in RTH to allow you to regain control - if it hasn't been mentioned

[@alishanmao]

try seeker 450 V2 SE brushless gimbal upgrade at my site.

[@paland4]

Can somebody (alishanmao ?) tell me that in altitude or gps hold mode what does the throttle stick actually do? What happens if you set it in center, up, down? Is it just a "relative" control to go lower or upper? Thank you!

[@FDISTEJASPATIL]

really helpful brother,,, pls tell want to upgrade cheersion CX 20 with naza lite, don't want to change ESC, pwor distribution board , radio. is it works... pls tell

[@joshuahuang07]

no, don't bother the PDB has to be compatible with the naza m lite as in it has to be the PDB that came with the kit. Also ,the cx 20 probably won't support the extra weight (don't take my word i'm not sure)

[@ThinkGreen1976]

Ali, What Motors & ESC's are you using in this build?

[@dtmpowerboss]

does naza HAVE TO arm all the time before take of?

[@niharranjanmahali8549]

Is it dji naza m lite version flight controller....? Plz ans me...

[@DNA_YOUTUBE]

Dear Sir can you please help me out to setup my quadcopter. I am not being able to properly link my T10J and Naza V2 but the receiver R3008SB is having green led on when transmission is on...

[@TheRattleSnake3145]

How did you activate failsafe when you turned the TX off?

[@gurudattapanda]

what is the camera used on the drone?

[@gilbertcollie7108]

Hey boss! The plane the plane.

[@PYE172]

what is the range and the price please ?

[@SilverChevy2008]

Nice shorts, do they make them for men?

[@TheMrgoughy]

how much would it cost (GBP) for that whole setup?

[@gobiandreson3111]

I upgrade frimware version after the led is not working properly what problem occurred?

[@maskystudio9193]

hi, sir if i turn on failsafe then how can i handle my quad before landing.

[@amarnath2935]

Hi naza m lite send telemetry details... to jumper t16

[@DarklyBishop]

what program did you use to edit this video?

[@NEVdD]

Page 21 of manual says "hover 15s, then land" I see someone was too hurry to play with his Naza ;)

[@rajithkmr5292]

Which flight controller is best for stability??

[@Lenny7118]

Does the Naza have an Altitude hold mode ?

[@marianohernandez198]

Sir I got a 450 whit the naza v2 can u please list me gain setting I need help

[@PaweWWnukuLaboratory]

Can I use plush 30A whit Naza ?? They are not 400mHz...

[@alvadron]

Hi, i bought the naza m v2 and i am having a fly like using acro mode, do you know how could i get a stable fly? My drone fly but it doesnt stay in the same place and it is moving to the sides without giving any orther. Thanks a lot.

[@alishanmao]

setup flight modes switch in assist program and in radio

[@iJongo]

I knew it you are alvin the chipmunk

[@DjTeddyGram1]

you are a god where I come from.

[@gautamsenthilkumar823]

I want to buy dji naza do u sell ?

[@AnushK47]

Hey @alishanmao when we take off which mode should be set. I kept in manual mode, felt difficult to take off and quad flipped once. In atti it didnt take offf. i need help and im confued with the modes.

[@alishanmao]

GPS is best

[@andiazhar5680]

hello alishanmao, wanna ask, did u use naza stock gps? i was wondering either its ok with m8n ublox gps,

[@darrenwatson1539]

andi, I'm running the Naza m Lite v1 with the m8n gps. So, far, it seems to do a nice job. Hope that helps.

[@LetsTubetalk]

Was this video done with the Naza Lite or was it with the Naza M v2?

[@brendan636]

seeing as the video was out before the naza v2 I would guess it is a naza-m v1

[@LetsTubetalk]

Brendan Taylor Thank you... sorry I didn't even look at the published date... duh. my bad.

[@chrisharrisseacaptainchris]

Alishanmao,my name is chris,and i have a turnigy 450 w/6 ch tactic reciever w failsafe mode also have the transmitter ttx650.i got rid of kk2.0 for a naza lite w/gps setup . i followed all your instructions and im still having problems.when pluged into my laptop the indicator light is steady green.so i thought i had everything right,i clicked on a button at top and it asked for a 32 digit number and its not on thr box or invoice ,or recept.i tryied 3 times with numbers on box ,and invoice and it said invalid .i tried to pay a hobbycentral here in fla.and he gave it back,sayin he wasnt familiar w naza however im sure i got most everything calibrated but not sure if im supposed to write to controller after every calibration or just after im finished w everything? can you help me id be glad to pay you however you can take a payment .ill be glad to pay first before you help me if you will.i really dont want to ship it off for fear of damage.i got it at atlanta hobbies and they wont contact me back to give me the #.i have a ton of money in this,and im starting to think i shoulda wentw/airplanes ive flown them and set up. thanks if you cant help ill understand,and put it n the attic. sincerely capt chris