DJI O3 RX LOSS 4m in front - HELP NEEDED - DJI RC2 - Integra - Air Unit O3 - FPV Action Team -

[@cianuri]

happens to me almost every time i use the DJI RC2.. Luckily most of the times i don't even feel it in flight, only see it in my osd, but I think we will have to keep the RC2 for the Avata and DJI FPV.. Also this is a well known and sadly ignored issue by DJI. What is more weird is that it doesn't happen at all on Avata or DJI FPV, it happens often when using the quads with O3, and not so often when I'm using on my Caddx Vista quads..

[@underlightcro1407]

happens to me if you set channel manualy and not automatic

[@cianuri]

@@underlightcro1407 for me it happens no matter what.. when it happens it's just happens. I'm keeping my channel on automatic by default, but I've also tried with manual and I even have the hamcfg file, so I've tried on each channel and no difference. Sometime it just doesn't happen at all and sometimes i have a billion rxloss messages on osd, especially when I'm really close(less that 10m) around me..

[@underlightcro1407]

@@cianuri i usually get that when i flew behind my back, that is why i switched to ELRS and no rx loss for the past year However, who ever have BNF drones with O3 like Nazgul and Mark5, they have no issue with RX on RC2 Ask me why, i really 🤷‍♂️

[@davidpride3160]

I have O3 and TBS nano - am getting exact same issue. RX Loss about 50m out. On my non-O3 quads, the TBS goes for literally miles. Super pissed off with all this atm. Can’t trust it which kinda dents the flying experience 😢

[@mattvesta5721]

Could you fix it

[@davidpride3160]

@@mattvesta5721 Yup. My issue was the crap stock antenna on both the Darkstar and the Pavo20. I swapped out for Immortal-T antenna - no more issues. Nothing to do with the O3 unit in the end!

[@LongboardersMD]

Hello, I have changed to automatic channel mode and the issue with RX Loss disappeared. Quite strange behavior…

[@sahil_fpv]

Are you sure auto will solve . Had rx loss today and end with broken arm . Mine was in manual CH1

[@LongboardersMD]

@@sahil_fpv In my case it was working. I flew five packs without any notable interferences. In the time I had the issue, I was in manual channel mode (CH2). After I changed back to automatic channel mode, there where not issues at all.

[@mattvesta5721]

Im having a fresh new dji 03, tbs tango 2 and havinf the same issue,i had a caddx vista and it was the same, could you fix it already? Many thanks in advance

[@LongboardersMD]

Have you read all comments? I have change the channel mode to automatic and everything was solved.

[@CoreyFPV]

Bin the Controller 2 and go Crossfire buddy. Most will say ERLS but CF is a much easier and better option.

[@janezhitori6203]

Never use dji controller on fpv. Buy separate radio and rx (elrs is cheapest), for example radiomaster pocket on a budget, radiomaster boxer, xt16s,... Have separate links for video and radio is much better and safer.