Tom my phantom4 update latest firmware but camera video is not see my android mobile Mobile device screen is black
@TAPPChannel7 жыл бұрын
now I don't have that downgrade option and I've updated my Drone yesterday right before my vacations.... Now my first day of filming on a vacation turned to terrible... Please help. How I can downgrade it??? I found the easy way to downgrade RC but still fighting with the drone
@amarettini17277 жыл бұрын
TAPP Channel contact the dji support
@Micoolaw8 жыл бұрын
Whenever I click the dji assistant download for my mac nothing comes up? help?
@Micoolaw8 жыл бұрын
my security preferences were blocking it. got it
@johnridge70788 жыл бұрын
Hi Tom - loved the video, but alas the procedure doesn't work for me. Everything looked fine, but after downloading 100% of the upgrade, the Assistant said "Upgrade failed". I rebooted the P4 and pressed the retry button, but it failed again. And again... iMac running OS 10.10.5 (Yosemite). My problem is that this happened to me yesterday, as well. Then I really was trying to upgrade to 401, and eventually succeeded by using DJI GO as the connector. Today I was trying to Downgrade (since 401 doesn't work properly on my P4). Unfortunately the DJI GO doesn't allow a downgrade! Any ideas? [iMac running OS 10.10.5 (Yosemite).]
@kyautotech32026 жыл бұрын
Hi , I have a problem after upgraded my Phantom 4 , i can't connected between RC and Aircraft. what should I do?
@johngurd26553 жыл бұрын
Hi. Tom I have a phantom4 every time I turn on the controller it ,beeps continually what could be Tahoe problem?
@uragontv37536 жыл бұрын
hi tom i have a problem with my gimbal, its moving very fast movement and i cannot make picture of video, please help me fix my dji phantom 4 pro V2.0
@BardhokNdoji8 жыл бұрын
Tom, nice video again thanks. I did the update with the dji go app (iPad mini 4) it went great apart from when it asked me to detach the USB cable and attach again to refresh the updating proces. But to me the updating through app seems very simple compare to the PC one.
@phantomflyer60877 жыл бұрын
Hey Tom, So, I recharged my battery and controller on the P4 and was required to update, I attached the iphone to the drone and it stopped at 99% it sat there for over an hour, then shut off, now when I turn it on it beeps .....constantly, ?? I see this is a common problem, So how do I fix it......cheers!! and keep up the video's
@dronin_ronin6 жыл бұрын
Hi Tom, thanks for great videos. When updating spare batteries should I use laptop for all of batteries. Many thanks 🙏
@raypows8 жыл бұрын
Thanks for this tutorial. I followed this exact protocol 3 times now, uninstalling assistant 2, restarting my iMac, reinstalling assistant 2, and each time after downloading 100% of firmware it tells me it failed. It hasn't done this in the past. Do you have some advice?
@tomwootton68338 жыл бұрын
Hey. Did you find a solution for this problem in the end? I am having exactly the same trouble and have no idea how to fix it...
@patrickager-photographer15368 жыл бұрын
Hi Tom - first class video. Made the latest update today and re-calibrated IMU etc. However, I noticed during a short test flight the I have a slight yaw and when hovering the P4 goes up and down a few inches as if it cannot find it's correct altitude? I have watched your IMU video and certain I did it right.... and issues for you?
@CV_CA8 жыл бұрын
How about the transmitter how do we suppose to downgrade the transmitter? I have problem with the last upgrade, want to go back.
@pgielzakdesign8 жыл бұрын
I just unbox Phantom 4 and my controler wont connect to P4... Everything is charged, green light on controler is green, and software (DJI Assistant2 and DJI GO) are up to date. I can go into (grey colored button) camera mode but dji go still says its disconected. Please help.
@RahmatTantular8 жыл бұрын
Hey, i have 2 batteries and i don't remember which battery that i used for update, but so far there's no notification to update my spare batteries. I'm using android not iOS btw. Will there be a problem if we don't update the spare battery?
@rickzilla098 жыл бұрын
I keep getting upgrade failed. I'm using an iMac. I did try to reboot the phantom and my computer and also tried deleting and re-installing the software. No luck! :(
@nelderaabreu12628 жыл бұрын
Helo Tom. I have a question. In the first time Only Phanton 4 is power? RC no? Excuse me, but I don't speak inghlish. Tanks.
@iansmith76988 жыл бұрын
Trying to upgrade using Assistant but getting nowhere because the App just keeps showing me the animated image saying I need to plug in the USB to the PC. It IS plugged in and the device is showing in my "Devices and Printers" (under Windows 10) under "Unspecified" category as "DJI USB Virtual COM (COM3)". The driver is the latest according to Windows 10.
@hiteshbodhani52287 жыл бұрын
there is no downgrade option in dji assistant... can anyone help please
@GeocachingTime8 жыл бұрын
Tom, how do I get the iPad to record the audio of the flight?
@FPVcambodia8 жыл бұрын
Tsk Tom, why would batteries need to be updated, by the way!? It's my first DJI (P4) and I updated the firmware with the tablet App (a few days ago), then flew all of my 3 batteries the same day, not having been asked to upgrade as you show while you reconnect the tablet after the Copter Laptop update!? would it mean that updating the copter with the tablet does not need to re update will all spare batteries!? Weird, thus my question. Cheers and Safe Flying!
@cericlawhorn60618 жыл бұрын
I'm having the same issue--no battery upgrades avail on PC or I-pad after update??? What does the battery upgrade do???
@78633488 жыл бұрын
Big help Tom. Sure happy I subbed last year. Keep up the great job your doing. Happy Holidays.
@viliuzk8 жыл бұрын
Hi Tom, have you finished with Phantom 3 videos?
@christopherjones12058 жыл бұрын
when updating batteries do you connect to any cables or is it wireless thanks
@Tom-if6fe8 жыл бұрын
Normal setup. Connect rc with mobile device. Power RC, than power Phantom. Just as you normally would. Stay tuned and fly safe!
@lloydledrew42008 жыл бұрын
Is it possible to slow down the rotational speed of the left control stick?
@samlim32338 жыл бұрын
I'm getting and esc error after updating and now plugging into my mac laptop the phantom 4 won't show up on the assistant app.
@PixelProduxiones8 жыл бұрын
hey tom one question... before the last update i could put my ph3 in atti mode and achieve faster flyghts , that was very usefull when i had wind situations that i needed the copter to come back faster, also when i put atti mode the sound was louder, like it was pushing a lot of power, after last update, both gps and atti mode achieve same speed and i dont hear the motors speed up in atti mode, is this normal? did dji do that or i need to set that up again?
@Befetti8 жыл бұрын
Hi Tim; an unrelated question. What software do you use to produce your KZbin videos? You get a very good result. Thanks
@reflexfilms8 жыл бұрын
its not the software....
@reflexfilms8 жыл бұрын
what sort of keyboard do you use to type?
@PinchnerHouse8 жыл бұрын
Where is it documented that DJI does not recommend the Go App for upgrading firmware? This makes no sense to me. Upgrading with the app and my iPad has worked flawlessly for me for every upgrade.
@yueeque8 жыл бұрын
Hi Tom, erstmal danke für deine ganzen Tips. Ich bin gerade dabei das P4 update zu machen. Kannst du mir bitte sagen ob und wie ich den RC über den Mac upgraden kann ? Vielen Dank
@nldronesolution8 жыл бұрын
Can the Phantom 3 Advanced running on this dji assistant 2?
@Dabobeans8 жыл бұрын
Tom, a really good video. I want to say thank you for the information that you put out on KZbin. You have helped me many times being a new Phantom 4 owner.
@patrickvanwye40428 жыл бұрын
How would one, having switched Mac to Android, unload the Mac OS in the Phantom 4 and install the new OS?
@ikonane8 жыл бұрын
Really beautiful and professional looking videos! Subscribed.
@kylematthew11185 жыл бұрын
My phantom 4 does not take off after the update .what's wrong with it
@rossianwari8 жыл бұрын
after firmware upgrade RC distance decreased to less than 300 m T_T how to fix it?
@yueeque8 жыл бұрын
Nachtrag: Der Kopter ist up to date. Ich bekomme beim overall status keine update Meldung für den RC. Kann ich wohl davon ausgehen das der RC kein update braucht ? Zu den Batteries: Ich hab 3 batteries. Die 1. ist updated beim Kopter update. Die 2. mit der slide function, wie du es gezeigt hast. Bei der 3. kommt keine slide (update) Meldung. Muß ich weiteres damit tun, oder kann es ignoriert werden ? Danke für deine Hilfe (Werde eine Osmo über dich bestellen)
@martinmaciel97807 жыл бұрын
hi can you help me linking my rc to the aircraft please i am new to phantom 4 please help
@killercake908 жыл бұрын
i downgraded my ph4 for 1,6,0 to lower 1,5 and now its saying to update my remote and engine won't start..
@OnaQwest9098 жыл бұрын
Tom, your video was extremely helpful thank you very much.
@sixmantoronto8 жыл бұрын
Your tutorials are top notch brother.
@m.schuurman18808 жыл бұрын
Tom, i love the new intro!
@elvisbest32138 жыл бұрын
this doesnt work the download is totally different and keep asking me about connecting the inspire1 not the phantom 4
@mlgpro9357 жыл бұрын
same with me
@Reichiruu8 жыл бұрын
So some unverifed chinese drivers was installed by the dji assistant 2. just a headsup.
@vulcanrider12677 жыл бұрын
how do you downgrade the p4 radio only
@austinlhk8 жыл бұрын
Intro song?
@Josephtimeisallwegot7 жыл бұрын
thanks tom. that video workd for my new phantom 4.
@DougMacGregor8 жыл бұрын
Fantastic video Tom!
8 жыл бұрын
You are the best man!! Great tutorials !! TKS
@Bocaj778 жыл бұрын
Thank you very much for this video, very helpful!
@TomsTechTime8 жыл бұрын
Please purchase your future DJI gear via my link to support my work for free (I get a small commission)! DJI Phantom 4: goo.gl/JPGVo8 DJI Phantom 3: goo.gl/dMcCSM All other DJI products: goo.gl/EkF2Sa Thanks all together, stay tuned and fly safe!
@alexguorgi19428 жыл бұрын
+Tom's Tech Time, Just a quick question, when I fly in sport mode at top speed the drone will start to tilt forwards towards the ground? How can I fix this if you can?
@yohanessulimin90667 жыл бұрын
Thanks TOOOMM
@YAKUILLASIN8 жыл бұрын
dude i love your videos!
@KE6DOA8 жыл бұрын
Good job as always
@juliansantiago66257 жыл бұрын
Thanks, Muy buena Información.
@justinh98145 жыл бұрын
Not sure if this will help everyone but I fixed the "no downgrade option" problem by: 1) uninstalling current version of DJI assistant 2) (from dji's website) downloading the "DJI Assistant FOR PHANTOM" installer... turn's out I was using the "DJI Assistant" program which has been discontinued for a while now (I had no idea). DJI now has assistants for all different DJI models, so if you have a Phantom, download the Phantom installer, if you have a Mavic, download the Mavic installer... Hopefully this helps someone out! Also, is anyone having trouble with their Phantom 4 controller not taking a full charge?
7 жыл бұрын
Thanks! You really help me!
@michaelalexander9176 жыл бұрын
Too bad the Pro + does not allow for downgrading. It doesn't even show any versions at all. DJI have made a mess of the latest upgrades!
@GiannhsDaskalakhsLASER8 жыл бұрын
great video !
@harasdamarcha57076 жыл бұрын
How do you do time downgrade? You forgot man...
@whj117 жыл бұрын
Very good thank you.
@Casecall038 жыл бұрын
Thanks Bro!!!
@niKolasBedoya8 жыл бұрын
dankie menier
@carlosgarrido15918 жыл бұрын
Great!
@zdzichzcan28088 жыл бұрын
Hay men could you speak a little bit slower please