Pioneer DJ DDJ-FLX10 vs DDJ-1000 comparison - What's the difference?

Ratzi compares the new Pioneer DJ DDJ-FLX10 controller head to head with the older DDJ-1000. What's the differences? What's new, and should you upgrade? 🤨
WATCH DDJ-FLX10 REVIEW 👇
🎥 • WHAT WE'VE BEEN WAITIN...
BUY THE DDJ-FLX10 👇
🛒 www.djkit.com/...
Follow us for more equipment reviews:
/ djkittv​
Twitter - @DJKitUK
Facebook.com/djkituk
Instagram - @djkituk

[@nikoandrusic5426]

I really like the flx 10 and it looks amazing however i am really happy with my ddj 1000 and the small feature upgrades the new controller gives are not reasonable enough for me to buy it. Four decks are four decks that is all what matters 🤙🏼

[@JohnoScott]

AND you can program the pads on the DDJ1000 to be RGB parts/stems controllers in rekordbox

[@JohnoScott]

@Steven Shearer yea i agree they could be better but are they better on the DDJ1000 than the FLX10 ?

[@JohnoScott]

@Steven Shearer hopefully there will be a software update to improve it

[@ShaunyWalker]

The DDJ 1000 Will always remain a future classic. The DDJ FLX 10 is an evolution.

[@ravidavis1847]

Well put!! Nice insight burv.

[@hnrik_music]

If you have a DDJ-1000 I honestly don't see any big reason to upgrade. The stems feature on RB are sub-par to say at least with the competition (although this is a software issue not hardware), and, this personal taste, but I prefer much much more the jogwheels and the all illuminated key pads on the 1000 vs the flx10.

[@medlish]

Upgrade, no. RB stems are sub-par atm, true, but you can always go to serato and I'm sure RB will improve their stems with time. You can also just map the stem buttons on the DDJ-1000, you can even map them on the 400. It's more about having the dedicated buttons. Personally I wouldn't upgrade from the 1000, but if you are looking to upgrade from a 2ch or an "entry level" 4ch, this is definitely worth looking at.

[@tharukkus]

Very true, buy I have both the 1000 & the XZ. The XZ has the same pads the FLX10 does so even though I prefer the 1000s' I'm already used to the FLX10s'.

[@tommydellz]

Help me out here, I'm getting back into all this after years out of the game. What's "the competition" with better stems features?

[@hnrik_music]

@@tommydellz Right now the best algorithm for Stems is without a doubt Virtual DJ 2.0, second is Serato.

[@Nogi-aka-DJNugz]

It’s an absolute monster of an upgrade - it feels and sounds better, jogwheels are tighter

[@DJShuffle07]

I guess that means I'm about to get the DDJ 1000, I'm ready for it 😎🔥🎧🎶

[@jdsmart7530]

I just would like to thank you for providing us the accurate measurements and dimensions of the controllers, so that we can make a decision and make sure that the new controller will fit our bags and cases. thank you for this nice video, A+

[@djkit]

No problem, glad I could help! Don't forget to sub!

[@djalejandro312]

Biggest thing I'd like to know is if there is noticeable improvements to the sound quality output and microphone quality output. That plus the ability to run Serato is the biggest value for me.

[@Marky_Trance]

FLX10 on order! Hope to get it on release day. Great review side by side - thanks for that!

[@djkit]

Good choice! No problem at all! Check out my full review here, and don't forget to sub for more! kzbin.info/www/bejne/poa9oqOMi6-Hg6s

[@dapremednb]

Great video, but master tempo and key synch are not the same thing

[@bahalospanty]

I absolutely love the FLX 10. Solid controller you will not be disappointed.

[@Bertiemang]

I can't believe the FLX10 doesn't have a nub on the tempo fader to indicate when it's neutral

[@shari_8410]

and i can't understand , why the Hell Pioneer does 6 CFX on FLX 10 so far but still no damn PARAMETER Knob to manupulate the Fxs too much empty place justr wasted 🙄🙄 no Chane to midi Map the Software Parameter Knob aswell , just stupid .. For me FLX 10 only Points in the enhanced Jog Displays ( 3 Band Waveform , Stacked Waveforms , PAD View , ) otherwise not realy New Clubstandard Layouting .. Still too much DDJ-1000 Look. just to leave the outer Rings of the Jogwheel Edges black instead of the silver/Aluminium Look like the DDJ-1000 SRT ..

[@DJBennyswift]

This was a really nice comparison of both controllers, I almost got the ddj-1000srt back in January but was told to hold off because a new one was coming, so I waited and saw the leaks, I’m a bit saddened that it’s geared more for Rekordbox and Serato is secondary, but it works with both softwares. I tried to hold off and was going for the Rane Four, buuuuuut I just ordered the FLX10 and it should be here to my home by Thursday! I’m really excited to see how I can work it.

[@DJBennyswift]

Update on FLX10……I honestly love it and use it with both Rekordbox and Serato, which both run perfectly well, just minor differences with softwares. Very happy with this investment for my DJ business.

[@19Jose91]

Where do you see it’s rekordbox geared?

[@DJBennyswift]

@@19Jose91 you can use both softwares but certain features are geared for Rekordbox not for Serato.

[@DjTonioRoffo]

@@DJBennyswift Serato is now owned by Pioneer sooo... yeah.

[@DJBennyswift]

@@DjTonioRoffo yes it is, let’s see what happens since they already had the plxcrss12 in line and updates to the opus quad, etc. What changes will come in a few months or next year, we’ll soon find out.

[@m-stat9]

The first comparison video! You guys rock ✌️

[@djkit]

Glad you liked it!! Don't forget to sub!

[@rubenreyes3125]

​@@djkitthoughts on the build and in comparison to the DDJ 1000. Bare in mind I've never seen or touched the ddj 1000 in person. So idk how the FLX 10 compares. What's the 1000 like? Is the FLX 10 the same or better? Any differences? Does any part of it feel cheap and plastic like the Flx - 6 or is it a quality build, durable and feel nice? Or does anyone else have this answer if they've seen both. Just curious. Appreciate your time and answer! Cheers 🍻

[@djkit]

@@rubenreyes3125 it's the same build as the DDJ1000 in pretty much all areas. Nothing like (much better than) the FLX6.

[@dresdr3ams]

Never seen your channel before, brotha, but i love the energy, information, and TIMING for this video since it just came out. SUBBED! 🎉

[@akamaih6463]

You can map the stems functions to any pioneer controller that has pads (ie DDJ 1000, FLX 4, etc ) so if stems is the only reason you're upgrading first look at mapping to your current controller to rekordbox.

[@djkit]

This is a good call, but look at those new buttons! 😍

[@DjNemes1s]

Are they unlocked on the DDJ1000 RB license though or do you need to pay for a higher tier RB sub to unlock stems for mapping?

[@akamaih6463]

@@DjNemes1s Stems feature is free and doesn't require a plan to unlock them

[@DjNemes1s]

@@akamaih6463 awesome, thank you!

[@johnnyblount3859]

I was told because my back book pro is a 2016 model I can't map the stem. I would have to upgrade my computer

[@DynMarkMusic]

I've been using my DDJ SX for 10 years now and I think it's time to upgrade

[@DynMarkMusic]

@Steven Shearer definitely the FLX 10

[@DjTonioRoffo]

Why the USB C though. That's bound to pop out at the first inconvenient moment.

[@djfamilysweden]

Flx 10 looks great and some good option.. this one also great review 🔥🔥💪

[@djkit]

Thanks for watching! Don't forget to sub for more!

[@djkaneck1]

Pass…DDJ 1000 still king

[@MarveInc]

I feel like I don’t want to get used to features I can’t use on cdjs like the Stem shit on the flx10 it’s great but then I get used to it and if I use cdjs I can’t use it

[@lukasbarthelme9581]

Yeah exactly what I was thinking with stems

[@louielou6294]

Agreed, still using my DDJ 1000 this doesn’t wow me.

[@Nogi-aka-DJNugz]

It’s a great upgrade to the 1000. Used it yesterday. The stems feature is a game changer, jogwheels feel tighter, etc

[@davidedwards3838]

What are you going on about? You can adjust the jogwheels on the 1000.

[@Nogi-aka-DJNugz]

@@davidedwards3838 I just like the feel of these new jogwheels. they are slightly different. maybe they feel tighter since they are new? the design is slightly different too.

[@alkotamusik]

It’s the same jog wheel just different design going around 😑

[@brandobecerro]

You can map the stems feature to one of the pad options. I mapped stems to my samples feature since I never use that. I got the DDJ1000srt.

[@JoshWaller]

@@alkotamusikno, they’re actually not the same jog. Pioneer made them closer to the 3000 jogs as opposed to the NXS jogs that the 1000’s had. Still not 100% on par with the 3000’s, but much tighter than the 1000’s.

[@djfunkyjoe8215]

Brilliant review and straight to the point.

[@nartnayr]

Just bought one! definitely looking forward to it being shipped in the coming days :D

[@djkit]

Hope you enjoy it! Don't forget to sub and check out my full review of the FLX10 here: kzbin.info/www/bejne/poa9oqOMi6-Hg6s

[@kaicanada7213]

where did you purchase it, been looking around and seems sold out

[@nartnayr]

@@kaicanada7213 As soon as I heard the news about it (eight hours after it being released) I went straight to Guitar Center's website and ordered one to be shipped to a local location. Hopefully you'll find one soon!

[@alexmason7103]

Do NOT buy the FLX10!! You can re-map you 1000 to use THE SAME stems features as the FLX10, and the extra colour effects barely get used. Also, one of the main reasons people buy the 1000 is similarity to CDJ’S - which DONT HAVE STEMS and probably won’t for a very long time!

[@jimmyd-kingstv600]

If you have a DDJ 1000.......no need to upgrade

[@brandobecerro]

Right. I mapped stems feature to my sampler pad mode since I didn’t use samplers at all on the DDJ1000srt.

[@m009bt]

im still out here on a ddj-sb so im most definitely gonna upgrade

[@djkit]

That's an awesome upgrade 😎

[@lafrogmhh]

samo bro sb2 here.. need to get 1000$ first

[@triple6j]

Was thinking about getting the flx 10 but after seeing its even bigger than my 1000 I don't think I will bother. I feel like they could makes these a little smaller tbh

[@JoshWaller]

Great vid. I pre-ordered the FLX-10, but there’s some things I absolutely hate about it, and am not looking forward to: 1. Jog surrounds - don’t like the new style, makes them look cheap as opposed to the 1000’s. 2. No click on tempo slider - why? No need for them to take it out, going to be a pain in the arse now to not flick it by accident and reset tempo. 3. Wish the hot cues were fully lit, not partially. Overall, I’m looking forward to it, but I don’t know how I’ll cope with those 3 things among others lol.

[@sdot3358]

What are your thoughts on the split cue? Apparently flx don't have it.

[@JoshWaller]

@@sdot3358 honestly doesn’t bother me as I’ve never used it, I just switch between cue and master when I’m in the mix, but it would’ve been nice to have. Shame considering that this is the new flagship controller and it’s either missing a lot or has quite a lot wrong with it

[@JadeEyeland]

no center detente makes it so you can do more precise tempo +/-

[@TheFunkloft]

@@sdot3358 1000 didn't have SPlit cue as well. FLX10 does, I believe.

[@firsurf]

my ddj 1000 is bnew, no need for me to change it for many years will last to me, hehe, thanks for the video!

[@oliverbodzin]

no ZERO Pitch Center Click is verry bad. We first don‘t like it back then at the later Technics SL1210 Models.

[@marcosbabeto]

Looks like a nice dj gear. I have a ddj sz. I don't know if I Should replace my sz to flx10. My sz release DVS and flx10 doesn't.

[@djkit]

Yea, the FLX10 is DVS compatible for Serato, but not a hardware unlock!

[@damiansanchez3]

NS7 IV anybody... The rane One is NOT a NS7 replacement.. Used Numark for over 10 years, now im on the rev7 bandwagon.

[@shari_8410]

what i really dont understand is , why pioneer did spend now 6 Sound Color Fx on DDJ Flx 10 but still dont spend finally a dedicated Fx Parameter Knob for the Sound Color Fx 🙄🙄makes no sense to me again . more further ... Still no real Clubstandard Looking on the Mixer Section execpt for the small Beat Fx Channel Select lights Wooow .. Still no Vinyl Adjust , For me still too less Functions on a ''Controller'' to be away for must using the Laptop etc..

[@djkit]

Remember the high end features are on the DDJ-XZ though! That's the big boy!

[@cashvault1996]

I’ve owned a DDJ-1000 for Rekordbox for almost a year now, and I still believe that I’m sticking with it for as long as it will last. That may just be the pro basic controller I’ll only go up to. The FLX10 looks cool though.

[@nodaysoff2005]

You can remap 90% of the buttons to the DDJ. For stems and USB c it isn't worth the upgrade

[@Kabrito-Recordings]

DDJ-1000 you can input a Phono Player in all 4CH, on the DDJ-FLX10 you can input a Phono Player only CH1 and CH4...

[@justino9042]

2:20 you know whats interesting i found a store that is selling the ddj 1000 more expensive than the flx10

[@djshaqtheripper1]

Got the Rane 4 two weeks ago practiced on it and used it for the first time tonight at my gig. Wasn’t happy w it Jog was was tight and stems didn’t sound too good. Im honestly thkn of returning it and switch bk to Pioneer. I have the DDJ SX and it has been wonderful for me but I knew it was time to upgrade. Also wana know can I use the DMX while using Serato and not Rekordbox?

[@enprisezzz]

Thanks for that great comparison. I just purchased a new laptop last week and I didn't know I may be getting a new DJ controller this week. I've loved my DDJ1000 since it came out. I left Traktor and my 4-Trak as it was glitchy the second I got it. I had been on Traktor for so long. Getting the DDJ1000 "forced" me to check out rekordbox and besides one little difference, I've loved it. I think delaying the SRT was huge in my decision at that time. I always was weary of the "norm" as Serato was the norm. Perhaps, this will allow me to try both! Anyway, I'm most excited, beyond the stems, the DMX ability. I have some Gigbars that I would love to see someone demonstrate!!

[@samanderson806]

No mention of the jog wheel click down to use thing. Is the FLX the same way? Do you have to click it down with pressure to scratch or whatever?

[@andrewgoodrum7830]

oof no center click on the tempo adjust

[@dantecelle]

DDJ-FLX10 for sure. I had the DDJ-1000srt. It was great. This has better features.

[@aringrey]

hate that the flx doesn't have a centre click

[@daversqq]

I bought flx10 only because it’s not possible to buy a ddj1000 anymore. I just like the ddj1000 much more. Only what I like on flx10 is better crossfader and the lcd screens. Maybe fx working for isolated parts is a nice add up. But stems itself I don’t need. And the design of jogwheels of flx10 is very disturbing (I don’t like the whole flx series but I want an upgrade). I still wait for the shipment but I also know I will love it despite loving ddj1000 much more :)

[@borroq]

how was the flx10 for you so far? i am planning to buy a flx 10 because i can t find the 1000 no more :(

[@daversqq]

You won’t be able to get a brand new ddj1000 unless some left overs in warehouse in few shops across the world but the chances to find it will be very low. Despite the design, I love how flx 10works, it’s better than ddj1000 with performance. No issues with it :)

[@borroq]

@@daversqq thank you for your response! Any problems with the fact that the crossfader doesn’t have a neutral +0- click?

[@daversqq]

The jogwheels are a little bit loose but I got responses from many top DJs that it seems normal. Some models are without it but it doesn’t affect anything at all except being scared at first :)

[@daversqq]

As goes for the jogwheels it affects all mechanical jogs, 1000 had same issue for most users

[@jayh1264]

Great comparison, but I must say I'm sticking to my ddj1000 not much of a upgrade to warrant a new controller specially when it's geared to just rekordbox and serato, yes you get it, I'm a virtual dj lover as I have had the pro software for well over 15year, I don't intend to purchase another software just to get a new controller, plus I have tried rekordbox as a trial at begin and had many glitches with it, maybe all iron out now, but I'm heard the stems separation is not great, hence not upgrading only if and when virtual dj maps it or another new controller hit the market and take my fancy, 😔

[@AlphablueOfficial]

Great side by side hardware review! I own the DDJ-1000 and the RB-DMX1 and I still ordered this within an hour of it releasing. The biggest selling point for me was the instant doubles for stems, allowing me granular control of the stems on channels 3/4. That, along with per-stem FX, and it was an instant buy. People will complain about the quality of the stems, but not only was it an intentional decision by Pioneer to make the stems lower quality to allow more systems to be able to handle them, the quality is hardly noticeable when you are mid-mix. Overall, this was an easy buy and will be the flagship for the next half-decade.

[@lcjdj]

Instant doubles and stem fx are working with the DDJ1000, as well

[@dav3official452]

The differences between both units are more esthetic than functional to switch from the DDJ1000 to the FLX-10. Steam separation is not that great in Rekordbox and can be easily made in the DDJ1000. The Opus Quad looks nice, but until Alpha Theta releases a full 4-deck standalone unit like the Denon Prime 4+ I'll keep my DDJ1000

[@davidbalan6571]

DJ Controller 1000srt and DJ Flx10 is the same modular sounds.

[@djgenius626]

,The 1000 SRT is always supreme, i use it with virtual dj, for its STEM features

[@Hello-userr]

Serato and RecordBox - old sh*t. Make a video battle of Virtual DJ vs Serato programs. Testing: the scratch sound the scratch filter, sensor settings (Does Serato even do this?) stems sound settings selection of the wavetrack type, zoom and much more Or are you a housewife who can't figure out the VDJ settings?

[@djkit]

Virtual DJ is a great piece of software, we're not denying that. However there are two points: 1, we're not really comparing the software here. We're showing what the hardware does and the differences between the two units. 2, the hardware (in fact, most hardware) is designed to be used with either Serato or Rekordbox. So we can only test what it's designed to be used with. VDJ will adapt their software to work with the hardware but hardly ever deal with a manufacturer and don't deal with retailers. Again, VDJ is great, but that's not what we're doing here. Thanks for the comment though! 👍

[@_DeepGroove_]

Is it possible to replace the jog rings on the Pioneer DDJ-FLX10 with the rings from the Pioneer DDJ-1000?

[@JoshWaller]

I was wondering this too! I googled them and they’re around £100 each, so not sure if I will do it, but if someone makes a vid on It I’d defo consider. I hate the jog rings on these

[@Msantor1605]

Literally the only thing I don't like...

[@JoshWaller]

@@Msantor1605 I spoke to someone from the Pioneer DJ development and design team and he told me that whilst the top of the jogs are the same as the DDJ 1000’s, the inside is completely reworked, and therefore the jog surrounds unfortunately won’t fit. Shame really, but I guess it’s something we need to get used to.

[@djphilter]

How do you enable Master Tempo?

[@break_the_system]

I didn't see much difference. high-quality displays and dmh. except dmh everything else is secondary. I use Serato on my 1000srt and have added the stems feature to the slicer. the operation of stems on rubber pads is much more practical, faster and more efficient than on small built-in buttons. thanks for the review

[@annasimonagarofalo]

about the pads, honestly I think those of my ddj1000 are better as I'm afraid that then with the use of the black color of those of the flx10 it will go away

[@Kabrito-Recordings]

in my opinion, the DDJ-FLX10 is just a small upgrade of the DDJ-1000, sure some features were added, some removed, and others improved, but maybe in practice, both are the same thing that performs the same.. .

[@Kabrito-Recordings]

@Steven Shearer my consumer desire has always been the DDJ1000, I believe it was one of the best equipment ever produced, so much so that they launched the DDJ-FLX10 with the same aesthetics and more advanced features, in other words, let's say it is an update of the DDJ1000

[@Kabrito-Recordings]

@Steven Shearer I also think friend... because let's be honest... DDJ1000, there is no better device... not even the XDJ-XZ which is an incredible piece of equipment, it gets to be as good as the 1000, even if the XZ doesn't depend on a notebook, but For me, without a doubt, the 1000 has always been and always will be my consumer dream, too bad the prices in Brazil are very high due to the amount of taxes...

[@takingafatdump]

i do not think the flx is a true replacement. i watched the pioneer video and he talks about the different pattern in the jog wheels signifying that it belongs to the flx series not the ddj 1000 series. we might see a refreshed 1000 for the same price point at some point down the line

[@djkit]

I think I saw the same video. He says the FLX series is replacing the current range where there have been two models. One for each software. This IS the DDJ1000 replacement, Pioneer have said so. We think it's a worthy update.

[@Stretch_London]

Flx 10 looks great... but won't be upgrading my 1000 srt anytime soon

[@rubenreyes3125]

Nice comparison. I was waiting for someone to do a side by side. Couple questions here. The build. Is it made of plastic and feel cheap? Or does it feel like quality like actually cdjs 2000 nx2 and a djm 900 nx2? How's the jog wheel feel? Similar to the 1000s? Better? I heard the sound card is better and the phono lines are much better than the 1000s original. That true? Appreciate your time! Cheers 🍻

[@beatslucas]

I have tryed the ddj1000 and the cdj2000s with 900nsx2. I can tell the difference in the mixer, knobs are not as good, the jog wheel is not too different but actually is not as heavy as the cdjs. To have the same experience as the cdj better to go with the ddj xz, I was surprise when I touch it feels like cdjs 2000 with 900nsx2 mixer. Anyway going back to the flx10. The knows and the job wheel looks same as the ddj1000. So I guess is gonna be the same, better than any other small jog wheel and mixer but not as good as the ddj xz or actual cdjs and proper mixer.

[@rubenreyes3125]

@@beatslucas Yeh I've actually never tried a ddj 1000. Been trying to get my hands on one for almost a year now (befofe anyone knew the Flx 10 was coming out) and it was just impossible. Back ordered by Pioneer, anyone selling used wanted ridiculous prices for a used piece of equipment and not under warranty. So I held off! I'm glad I did. The ddj 1000 I heard was the closest controller to the flagship club standard set up aka cdj 2000 nx2 and djm 900 nx2. That being said. Is the 1000 cheap feel and plastic or did it feel well built and crafted? I guess my point is for the extra few hundred dollars for thr flx 10 vs the ddj1000 are you paying solely for the few extra features? DMX output for lighting USB C connectivity 4 sensor crossfader now vs 2 Rekordbox stems Mix link technology Compatible with both RB and Serato Etc etc etc Or is it also manufactured better? Feel more sturdy and not cheaply made compared to the ddj 1000. Built better or just as good kinda thing?

[@rubenreyes3125]

@@beatslucas I've only read reviews and watched a few videos since yesterday but nobody has actually talked about the body of it and how it feels and if it's solid or cheap feeling........ I guess that's my main question if anyone knows. Or how does the ddj 1000 feel in terms of it being built? I've played on club cdjs and mixers for years so obvi know what those feel like. XDJ xz is obvi amazing but the price is too much for me!

[@beatslucas]

@@rubenreyes3125 I have never tryed the flx10. But for what I see in the videos the knobs, jog wheel look exactly the same as the ddj 1000 so I guess is the exactly the same quality. I think there is not difference in quality between those too. So if for you the new upgrades of the flx10 are worthy go for it, otherwise ddj 1000 still a great piece of hardware for the price.

[@rubenreyes3125]

@@beatslucas ok so for the ddj 1000 (assuming the flx10 is built the same or better) how is the quality of the build. Body and everything? Does it seem cheap and plastic like? Or quality build and durable and not cheap at all?

[@Hello-userr]

Pioneer FLX10 support in Virtual DJ build 7533

[@theogee02]

I have a DDJ, 1000 SRT and search buttons are actually beat jump

[@djkit]

Perhaps that's a Serato feature then, as the 1000 in this video is the rekordbox version.

[@DjMoDaDon]

I have already mapped my buttons i wasn't using for stems

[@DjMoDaDon]

Great controller, but you don't have to upgrade to the Flx 10 . If you are using rekorbox 6 all you have to do is midi mapp the buttons you want to use for stems track seperation

[@LewisGinn]

Have you heard rekordbox stems 😂

[@Rambo-dg7mr]

Rane 4 kick both of their arses... 👍🏾😎👍🏾

[@djkit]

@@Rambo-dg7mr for Serato maybe. For Rekordbox it's not an option though.

[@blkndna1374]

Nice comparison.. Gr8 job!

[@djkit]

Glad you think so! Don't forget to sub for more!

[@churchillcoins8519]

Excellent review, thanks can you also do a review of the features and what it’s like using STEMS on both?

[@djkit]

Sure thing! I'll get on the stems comparison, but you can watch my full review here: kzbin.info/www/bejne/poa9oqOMi6-Hg6s

[@DjMarkyBatch]

I think the FLX10 is genius by pioneer, people will buy it to use serato stems which are 'better' realise they cant use it due to processing power of their existing laptop, but instead of going and buying a new £1K laptop macbook air M1 onwards, they will just switch to rekordbox, and it just works... then when they use rekordbox and realise library management is awesome, FX are killer by comparison with Pad effects too, they will transition over fully. Has everyone missed this point? if the FLX10 was only serato, then this would not be marketable indirectly. and the fact it has DMX too, well, its the nail in the coffin for serato, with £8 per month soundswitch subscriptions, and additional hardware. I really fancy the FLX10, to replace my Roland DJ707m, I think its awesome.

[@69_MK]

i dj using serato so with the controller can i use rekordbox in the background for lighting or nah?

[@ljthirtyfiver]

Am a beginner dj when I started I bought the 1000srt . Still Trying to understand the world of dj and how to use a controller so I’ll stick with it for now….but that flx10 is fire. When I progress I’ll invest in one

[@djkit]

That's a pretty big controller to start off with!

[@stevenguillory9716]

​@@djkitI found an open box FLX10 for 1200 USD. Should I pass as a beginner for something simpler?

[@donruga627]

@@stevenguillory9716I would grab it. Since you in the beginning stage

[@mr.anderson7233]

are there L shaped male connections available? do u think its forehead will fit in a proX XS ddj 1000 flightcase?- as it also seems to be fitted for the FX 06 mk model

[@MAG320]

The DDJ1000 was never available so I bought the FLX 10. Definitely worth the buy.

[@dhaimovich1]

Wasn’t completely necessary but I’ve upgraded from the 1000 to FLX10

[@djstaples93]

how can I add logo on jogwheel for ddj1000srt. I use VDJ does that matter?

[@geraldfer]

Not letting my 1000SRT go... I'm just getting into it...wish there was a patch to allow the FX to work through VRDJ...

[@Le_Lys_Eclectique]

Great comparison man! Thank you! But the question is: s it really worth the 500 dollars more just to have (mainly) the buttons for stems? Personally don’t think so… What do you think?

[@djkit]

Hey Tony, it's a great question mate! For me, it's a yes. But, I am a mashup DJ so these features are really important to me!

[@TheFunkloft]

What are you talking about? Integrated RB-DMX1, much better audio card and phono pre-amps, better jog displays, USB-C. The better sound card alone is a no brainer for me.

[@sandsmarc]

@@TheFunkloft What does “better” sound card mean? I’ll bet you $1599 that you couldn’t tell the difference between the two in a blind listening test. You’re just accepting the claim that it’s better. I’ll need hard evidence.

[@Epicsburg]

​@@sandsmarcgotta consume consume consume

[@gerardgomez559]

I'm keeping my ddj srt 1000 but I'm also getting the flx10 😂😂😂

[@djkit]

Living the dream!

[@franklinenvy]

I just don't feel the draw to upgrade from my DDJ-1000SRT. I love Serato, but the new features on the FLX-10 for stems just isn't going to work. And why didn't Pioneer separate out the bassline/rhythm part/stem when everyone else has? Seems like a missed opportunity, imo. The only thing I see that I'd love to have is the stem/cue. But I have a feeling that's going to happen for me either way in the near future. 100%, not even going to consider selling my SRT for an upgrade. To me, it's just not worth the $1600 price tag (especially since I'm not a RB fan) and I'm certain the price of the DDJ-1000s are about to drop significantly and you still, for the most part, get the same features.

[@billmaries]

flx10 looks wicked, but why the fuck did they take out the tempo faders mid click. thats shite

[@djnika1]

I have a question. In my parties i have guests that use recordbox and i am actually using serato. Can we mix at the same time on dj on recorbox and the other in serato without problems?

[@ronellebrown6130]

Yes

[@PAROVSTELAR-z6y]

Thanks for the video. About the waveform colours, what ever you set in the software that's what appears on the ddj-1000. Not only a blue colour.

[@Koyeng30]

ddj 1000👍👍👍 i dj from malaysia

[@LachieMcg]

If price wasn’t a factor for t would be a no brainer. I recently got a new ddj1000 for half the rrp of the flx10 so I’m happy since I can midi map most of the features I’m missing out on

[@LachieMcg]

@Steven Shearer awesome ideas to customise. Yeah I’ve been loving it. I paid a few hundred Aussie bucks more than half price but they chucked in some monitors worth $400 so that worked out round about half price. The features of the flx10 seem sooooo similar. I wonder if the audio quality is any different

[@daft009]

I see the ddj1000 now for AU$1500 which is less than half of the flx10!

[@LachieMcg]

@@daft009 that’s an awesome price , where at?

[@Epicsburg]

I also just picked up a 1000 rekordbox for a killer price. I'll just map the new features.

[@OFresh]

amazing video thank you!!! might just upgrade!

[@ayewhite333]

Which studio monitors are those behind you?

[@djkit]

M-Audio BX8s!

[@djjosephbh]

Jog of flx10 seams bigger.

[@ravidavis1847]

I have been watching tons of gear vids! This was so nice and concise. Honestly I think so many controllers have too many bells and whistles..but this FLX10 is so intuitive. I'm from the school - a controller doesn't make a DJ. But thiis FLX10 looks like it could take your performance and eye hand control to new levels. I'm going to get it when I know I can devote the time (and cash). I also want to learn Roland line of controllers soon.

[@jamesodriscoll6748]

I'm not gonna get too technical.... hand me my tape measure

[@RealSantahunter]

But can it beat my DDJ SX2

[@djkit]

Yes it can. 😂

[@adriano6k]

From the prices I’m seeing right now online, the DDJ1000 is more expensive than the DDJ FLX 10.

[@househeadspeakz]

Great compassion. I am hoping that Pioneer will come out with the FLX version to upgrade the DDJ 800. I will love to see it overwise I will have to save up and wait for b4 I can get the FLX 10.

[@lmpoopingpigeon]

Thanks for the comparison. Please consider attached mic for your next videos :)

[@casparusdoets3816]

I wonder if the build quality of the FLX-10 is as good as the 1000. Had the FLX-6, build quality was sh.t

[@djkit]

Yes it's the same build as the DDJ1000. It only shares the prefix name of the FLX range as it's dual format to work on Rekordbox and Serato.

[@kayj312]

why’d they get rid of the center bump on tempo? bummer

[@azar6500]

Hello, does the flight case of DDj-1000 fit to flx-10's ? thanks.

[@djriqq]

Great job on the review.. loved the video.. i think ill stick with the older version

[@damiansanchez3]

Also the Flx brings back DDJ-SZ vibes...

[@francescog53550]

the DDJ 1000 is still way better looking ✨✨✨

[@unclebob8139]

I'm looking at new DJ controller, grown out of my little SB2 that I've had for years lol, its a toss up on the flx10 or the Rane 4, been looking for a ddj 1000 but they are like rocking horse s**t..

[@djkit]

TBH, the FLX10 is probably going to be like Rocking Horse S**t as well now 😂

[@jcalem14]

Can I connect the FLX 1000 with the DDJ-FLX 10?

[@jaspertheys5752]

Should i get one or should i wait for a new xz?

[@gregstus]

The XZ is being replaced by the OPUS QUAD to my understanding

[@jaspertheys5752]

​@@gregstus i don't think so.. the opus quad is Nice piece that matches your interior. But the opus quad is not the Clubstandard like we use to get from pioneer.. so yeah im waiting for An xz2.

[@gregstus]

@@jaspertheys5752 XDJ-FLXZ ahah

[@davidpereto4664]

Well explained. Keep you on mate ❤

[@NIVAD84]

Love my FLX10 I would suggest doing a deep dive review on it. It does so much!

[@djkit]

Check out our deep dive here: kzbin.info/www/bejne/poa9oqOMi6-Hg6ssi=7QptiV9K8KNMqluE

[@SteveF69]

Newer is obviously better, but having a 1000srt I don't see any drastic reason to upgrade. Stems is a big focus on all new controllers but the quality is really hit or miss with them, so the use case of stems is debatable.

[@djkit]

In fairness Steve, this is a really good point. I think this FLX10 is less of a big deal to Serato users as you guys have had Stems for a while that you could map to your current controllers. For a rekordbox user, it's a no brainer to upgrade!

[@P4JJP]

Very good comparison review ❤👏🏾👏🏾