RC ADVENTURES - JEM BUiLDS 💖 Axial SCX10 II 2000 1/10th Scale 4WD Kit PT 4 FREAK OUT ALERT!

[@thebigfut]

Don't care what you think or say Jem, you did awesome with this vehicle! Part of why I love this channel is because y'all are real and I'm just glad that success hasn't changed that about either of you. Be proud of what you have done and your hubby for doing the hardest thing of all and not getting in your way with this build.

[@Bustedrc]

You are doing a fantastic job Jem! Don't get frustrated we all run into problems. No matter how many kits we put together. For a 1st time build you are doing just great.

[@jamesburba1995]

Good job Jem ! Occasional frustration is an integral part of RC building, and your reaction to it is commendable.

[@SeamusMacMattain]

Great Job JEM!!! I know how kits can be and that one was pretty intense for a new builder... I taught a buddy (brand new to RC) today how to maintain his rig, and forgot a couple things, installed a piece backwards, etc, got it all worked out and right.... we all do it and no worries, you have joined a very proud club of RC builders, take pride in that beauty, and yourself!!

[@mikebrannock8316]

Enjoyed the video , Jem. The first time build by such a real person who happens to be a fine lady, wife, and mother has been an incredible series. Look forward to seeing more.

[@BravoManUK]

Jem summed up this hobby when she said it's a labour of love, so true. You need to cut out the body though, the final frustrating piece of the puzzle. Well done on completing your first build.

[@ShenRC]

Jem nice job! A tip from a guy who was building RC's for just about 35 years now, when you put something together that has multiple screws to fasten parts together screw in the screws but leave them a few turns lose do not tighten the first one down than go to the next screw... when you leave them lose a bit not bottomed out you can manipulate the parts so you can get the screws lined up in the wholes better because the parts will have some play to wiggle them around when you do it this way and when you get all the screws started then go back and snug each one up. Makes building much more simple and easy =)

[@TheRealRCSparks]

Who will help support Ladies in RC, by sharing this Video?! GO JEM! CAN WE GET 2000 LiKE CLiCKS?!

[@jasonxcore5568]

RCSparks Studio RCWifes Studio coming soon! Best way to end the night.

[@builtnotboughtrc9406]

me

[@awesomusmaximus3766]

Like button pressed

[@SlyNine]

I think ladies are fully capable of doing RC if they want too.

[@Daniel6661D]

RCSparks Studio Hey! Think it's awesome that I'm finally seeing Jem making a build video always thought it was cool how Jem was into RCing and having her own truck pinky well done Jem on the build can't wait to build my own haha

[@rccarrs1199]

Go Jem! Yay! That feeling of accomplishment after hours of fiddling & building. Love that Jem tried her hands at something new! Myself only built 1 kit but fix many different trail trucks & there are always frustrations.

[@richardhammerton1648]

Hi Jem, I think you did a great job, the first time building a kit is very hard, but to do it in front of the camera must have been a challenge. Well done to you, I hope to see more of you learning and sharing as we are not all expert's. Thanks to you both, I enjoy your channel and it was the start of me and my wife getting into the RC hobby. Rich and Leanne

[@hookedonrchorc171]

Great job JEM you inspired me to build my RR10 Bomber I've had since my birthday in October been putting it off. This is my first build and I'm looking forward to getting it done thanks again keep the dedication

[@AxiomaticPro]

This series inspired me to build my own scx10. Appreciate the build videos, I referred to them often for tips and tricks. Thumbs up Jem!

[@KnoxGTX]

I just recently built the scx10 ii (finished it last night). Before this kit I built a losi 8ight T3.0 from kit and recently an associated SC5M. What makes building kits so much fun is beyond learning how they work and keeping them running. Looking at the big picture of these kits and the thousands of hours into designing not just the vehicle, but the designing planning and R&D for the injection molded components, the frame stamping, machining of the gears and a quality system in place to k Make sure top knotch components are produced, establishing a fully committed staff to make a great end product that thousands of people will enjoy. I have around 12 hours into building this kit. Every single one had its own challenge, and it adds to the fun! You guys have inspired me over the years to go beyond the race track and hit some trails! Fantastic videos, you guys do a great job! Thank you for your efforts and commitment over the years to not only entertain us, but to teach us valuable tips to take our end of this great hobby to the next level! Thank you! Robert

[@michaeljones368]

I can't wait to see this truck run. and I was the first one to say GO JEM on the first video of this build. full support from the very beginning.

[@spacecase70]

Jem, you are doing a fantastic job! I cannot wait to see you finish it and have fun on the course!!!

[@kennethgalbraith]

this is awesome the hobby needs more people like jem in it .I can't wait to see the finished truck keep up the good work jem

[@tungstencarbide5227]

congratulations on finishing your first kit build Jen. Great job, can't wait to see you next one.

[@Luke-mj6ne]

Great Job Jem

[@Danboarding]

Jem's AWESOME! She's giving you a run for your money, Medic! I love her mini outburst of frustration, which I can relate to when I used to build one of these things, LOL!

[@TheTankRC]

Awesome for Jem to try this build, Aaron I hope your looking after your little guy while mommy is working so hard, I hope to see you soon on one of my next RC talk we could talk about all the changes you have made in the past year on your KZbin channel and what we are to expect in the near future. Keep up the great work.

[@FrankygoestoHobbywood]

Hey Jem, you're doing absolutely well. you got my respect for doing this build series..!

[@timvanasen6711]

My wife watched this cause she's building the same kit with a 67' chevy C10 body and doesn't want me voulnterring to help her unless she asks, we love you guys great job Jemm keeping positive building can be challenging 😎 good teamwork guys you guys are so alike lol only married people will get it, I gotta give you both props you're obviously best friends and that's we do rc and marriage

[@builtnotboughtrc9406]

what's cool about this video is that I can follow along and learn because I have the same truck

[@Thorbrook]

it's absolutely awsome to open KZbin and see jem buildg her truck. very inspirational thank you jem. And rd sparks rocks!!

[@jjjw2667]

Awesome seeing you rip threw this build Jem, way to get it done and hope to see ya do more builds in the future..

[@ericviger4984]

Great job Jem these things aren't easy and you managed to make it a reality. Now I gotta get my wife to build something hahaa. Everybody should be showing the love and liking this one!! Share it too. Great job guys keep up the great work!!!

[@navarrxk218]

Thanks jem for that fun watching the construction of the axial

[@MaxxPainII]

Aaron, if your sick or ill from now on, Jem can easily take your job. Great job!

[@TheRealRCSparks]

#FamilyBusiness !

[@davidmulkey4501]

Jem, way to go!! we are very proud of you and your Build, we can't wait to see the next video

[@wilwhite9360]

Hello, Beautiful, it's always a pleasure to watch you work and joke ..You seem to be so happy and I'm glad that you. like the 2 as much a pinky .lol .I have already built my with my grandson ,but we still love to watch you as much as we enjoy playing with ours . Please give everyone my best to is my once a us vets do get our moment every now and then..But thanks for all of your inspiration, and love of the hobby that's helps so many of us out there .Much love and thanks for helping me at least though times and made them turn out to be a blast..Just thank you for all of the help and support you give each person who asks for help there is no one better then Aaron on his game with the king by his side.. Take care Wil 😘😎

[@ubernewb3005]

one thing i found super helpful for assembling is to have a couple thread taps in my kit, in the sizes commonly used. makes pre-threading super easy

[@NordicRC]

Good job! Definitly not a beginner's kit. So fantastic work.

[@ericvannaken8876]

Great sense of humor. More Jem builds.

[@nathansavage4018]

Way to go jem I am glad you stuck it out. when you build your own , you will appreciate it more. and if it beaks on you you now how to fix it. can't wait to see it out on the trail/rocks.

[@disturbedmonkey]

well done jem, its always satisfying to get the wheels on and have a rolling chassis, and don't feel bad about getting frustrated with a build occasionally, it happens, just take a time out and come back later. (also notice how hard it is to avoid innuendo when talking about screws!)

[@rcoff-tek4101]

this is how real builds go great job in showing the real side big thumbs up

[@deckysrclyfe9420]

Sorry aaron but this is now my favorite vid on your channel. I laughed so hard though out most of it. You can see how proud she is at the end. Way to go Jem! You did awesome both with the build and the vid. Your a lucky man bud!

[@ericmolitor942]

congratulations the scx10 ii built isn't the ezest build on the market you did a great job. way to go.

[@adamsnow9738]

Jem is awesome at her videos!! A great host! good luck with your build!!

[@jrsinyard25]

Great job Jem!!! i really enjoyed watching you do these episodes.. all the different lingo you used was hilarious.. not to mention your alot easier on the eyes than Medic is.. keep up the good work. hope to see you in more episodes.

[@GoddyFavorites]

Way to go Jem. You did great for your first build.🥂

[@martinsmoot7499]

I really enjoyed watching this build, me and the kid will be tackling this soon.

[@goblinm4]

Very good job JEM and its ok to to get frustrated at a rc build it what makes the end of the build so great.. Thanks for the video

Congratulations Jem 💪✌️💯.....you have built a rolling chassis finished, good work and keep going 👍👍greetings Torro

[@takeii7173]

Jem! Good job explaining everything into detail! that will definitely be my next rig!! Crawl on!!

[@Cyclopsbiker1]

Doing a great job Jem I'm really enjoying your build can't wait till it's done and on the trail.

[@SixShooterRC]

you have done an excellent job JAM thanks for the build we all enjoyed watching you do this video can't wait to see the body for Her & Electronics installed & your first run video excellent video

[@alaska-rc-adventures3537]

your doing great enjoying watching the build making me feel like doing a build of my own

[@michaelthomas3262]

A big big heart from me to Jem - she is soooo lovely 💖 now i can't wait to see you painting the body and do the electric 👏🏻

[@SMKreitzer1968]

Way to go Jem! Nice job. Can't wait to see it in action.

[@happydood663]

Great job Jem! These vids got better and better as they went! Cheers!

[@stevenpangallo6779]

watching this all the way and sharing with my gf. Really starting to look like something that can be driven soon.

[@austonia1970]

thanks Jem I got my wife to watch this video and the others just to show her a girl can do it too . I think you're doing a great job I think I know what I'm doing all the time and I still need help once in awhile after six years in this Hobby so keep it up thanks for showing us the girls can do it too😁

[@Twizztify]

Great job Jem, looks like it's coming together pretty good

[@CandyBarMoto]

Thumbs up for The Cure's Close To Me at 6:16 !!! Hell yeah!! Doing a great job Jem!

[@Marty41P]

Great job thus far Jem, I've enjoyed your build series as I have Aarons. Keep up the awesome work.

[@Nickysix6]

the build is looking great so far Jem

[@russellswinehammer772]

Great job Gem, can't wait to see it on a trail!!!

[@chilly7261]

First time I ever hit like on one of your vids Medic. Guess I never bothered to... Way to go Jem! Can you put the feeling of building your truck in words? For me building is the pleasure of creating with my hands. A gift that wasn't given to everyone...

[@CallHerJEM]

Great question! Building this vehicle has been a satisfying experience; I thoroughly enjoy plans, parts and process all coming together. I've also marveled vehicle engineering and this allows me to touch that.

[@216sanchezb]

Really like these build videos.Its cool to see how these kits get put together even more any Rc4wd kits 👍🏻👍🏻great job Jem!!

[@ivanrubio3391]

I love Jem build series

[@mikoezx3945]

Thank you JEM! Build also getting hardest I feel can do it. Because I have too many RC model at my garage, Crash and repair it easy almost same as build of kits.

[@dereksfishtank7663]

I love the "what it's really called" subtitles. Its great!!!!!!!

[@bobbycarrick5067]

didnt even watch video cause I liked it first then watched it because you videos are always outstanding medic. congrats jem. keep up good work you two

[@2003abby]

i like it when you build and the tricks and the tips you give and the trail videos

[@peterkarv2845]

great job folks!!! can't wait to see it done!!

[@blakeracingmotorsports5492]

great job Jem can't wait to see it run and go crazy keep up the good work and always remember have fun with rc

[@metalrcmore6330]

Awesome job Jem you did it!!

[@davehubert3193]

it looks great good job Jem keep up the great work that you and Aaron do i really enjoy watching your video's that you guys make they make me happy when am feeling down

[@tommyfree4736]

congratulations on your first build jem. done a great job. so what if it's 5 hours it's 5 hours of enjoyment and it's a respectable time for a first time build

[@DeAnnWoods100]

Excellent build Jem

[@MangoBlaze78]

It is great to see the next video posted.

[@ShogunGlock]

Awesome vid guys! You both have great attitude and charisma. Congrats on your channel, you guys are awesome.

[@johntreloar8203]

Good job Jem loved the build.

[@jameswilliams9682]

cool part 3, very nice, can't wait for the next one already!

[@ashtondavis7139]

thank you guys!!!

[@donkrol7433]

Nice job Jem! Maybe build something a little bit easier for your first build like the Grasshopper 2. I built this with my 2 boys ages 12 and 9 and they had a blast. Very easy "starter" build. Now they are excited to build the next one with dad. Keep up the GREAT work!

[@russc2118]

Well done jem looking forward to the next one 👏👏👍

[@jamesstraub4981]

Awesome job Jem. You rock!!!!

[@chrismaslanka6791]

Helpful tip for putting screws in new plastic. Take a drill bit(I use a 9/64 bit) and lightly n slightly drill the beginning part of the screw hole to tapper the hole,just the very beginning of the hole. Best if done by hand so you don't drill the hole out. Also helps with future reassembly and the frustration of get the screw to thread in new plastic.

[@JOHNJ0HN9111]

love to see the very first rc couple wrench together and build kits.... i hope many more woman like Jem learn how to wrench on rc's.. my first kit was and yes Traxxas did make kits in the 80's and 90's was a Traxxas rustler... not my first rc.. my second one and still have it... need to finally one day up graded it to brushless lol...

[@mattr822]

Your doing awesome Jem keep up the good work

[@richardhalley6895]

WOW it's great to see you having ago it's the only way to learn ,KEEP UP THE GREAT WORK

[@T_T016]

loved it loved it loved it! thanks for build video!! you are awesome both of you! thanks again for the entertainment!

[@neilfairless4589]

Great build Jem. Love the 'I have months to break it' line. Takes me minutes hahaaa. N.

[@ChrisBeatty300cSRT8]

Excellent job Jem! 👊😎🔧🚙

[@jeffreyziola429]

You did a great job Jem way to build your own rig from the ground up 😁

[@sergio79arg]

very nice JEM. grettings from Buenos Aires. and this truck looks amazing

[@connorbostrom2729]

i love this build video

[@EastCoastScaleCustoms]

Your wife is great. Kits are frustrating, my friend. The first kit I did was written in Chinese. Love your vids!

[@alansim969]

Great Videos Jem I enjoyed watching them. Looking forward to whatever the next one is.

[@chanceroenne9845]

congratulations Jen

[@RCCARHOBBY]

Good job JeM! My tip is to us more often the hex drivers in the machine for getting the screws into the plastic parts. But for the first build it's great to keep at the work, didn't put everything in the next corner...;-) Congrats up to know! And for sure, you'll be that proud on it, you first own build truck!!! I'm still waiting for the next episod! Regards! Carsten from RCCARHOBBY

[@RCKING1]

Another great episode from JEM!! Making me want a scx10 ll more and more!

[@zildjiany]

HAHAHA, Jem! Minute 10 - HAHAHA, so hilarious, wish we could have seen your face while making those noises! Really enjoying these videos. Thank you!

[@boba4588]

Great job Jem !!!!!!

[@86fishinmachine86]

congrats on the build

[@SwampersRC]

awesome job Jem! it's great to see a woman go through the process.and now you know more about your new ride than you would have if it had been done for you!

[@Mac830302]

Good job Jem!

[@SouthDemonHoard]

nice job , I'm still working on my scx10 upgrade mods (6 months ) but always never give up ... can't wait to see the body mods