DNT Thermnight TNC 225R

  Рет қаралды 6,264

Bruce McPherson

Bruce McPherson

Күн бұрын

Пікірлер: 24
@mdees88
@mdees88 5 ай бұрын
Nice video. I just got my thermnight yesterday. 00:30 Why is the ballistic drop crosshair to the right of center? Do you have a wind value plugged in?
@brucemcpherson8832
@brucemcpherson8832 5 ай бұрын
No wind value. This scope was running a pre-release version of the firmware that had the holdover marked shifted about 4 or 5 pixels to the right of the vertical stadia on the reticle. There is a newer version of the firmware which eliminates this problem, but I haven't had a chance to install it yet
@180del
@180del 4 ай бұрын
The view through the scope is a higher resolution than it records,not really getting a true picture here,just bought one and for ratting and rabbits its superb,it could be used for centrefire in the day/night mode but the thermal would only be a blob at anything over 100 yards,fine if you have a spotter already and use night mode to shoot
@justsayin7937
@justsayin7937 2 ай бұрын
Do you use your shooting reticle to point at the target when trying to get the range with the range finder or do you point the ranging reticle at the target? The reason i ask is because when pointing the shooting reticle at the target the range is correct, but when pointing the ranging reticle at the target the range finder is reading 120yds at 100yds.
@brucemcpherson8832
@brucemcpherson8832 2 ай бұрын
If you range in low light or darkness you'll see the laser flash directly over the ranging reticle - and that's the distance that's measured and displayed. I've never found the measured range to be as inaccurate as you claim
@justsayin7937
@justsayin7937 2 ай бұрын
@brucemcpherson8832 It definitely is. Ill be returning it under warranty. Thanks. Edit: After looking into this further i was aiming at a longer rather than wider target that is elevated off the ground about 5ft. When pointing the ranging reticle directly at the target the ranging beam is wider than the target and is picking up the distance out past the target by about 20ft. If i point the ranging reticle at the base of the target on the ground i get the correct range. So basically if shooting at targets that are more narrow than the ranging beam that it projects, it would be best to point the ranging reticle at the base of the target on the ground. Or to keep it consistent just point the ranging reticle at the base of all targets so there's no room for error.
@brucemcpherson8832
@brucemcpherson8832 2 ай бұрын
@@justsayin7937 Most scope mounted laser rangefinders now use a horizontal laser splash because in most cases, the target animal is either on the ground or is longer than it's high. Early PARD scopes used a laser with a vertical splash and it gave incorrect ranges on everything except fenceposts 🙂
@justsayin7937
@justsayin7937 2 ай бұрын
@@brucemcpherson8832 That definitely makes sense. Thanks for the feedback.
@chriswinter2404
@chriswinter2404 5 ай бұрын
Hi bruce whats best laser ir for vulpine mk3 rear add on? Cheers great channel
@brucemcpherson8832
@brucemcpherson8832 5 ай бұрын
I've never used a Vulpine so can't say for sure. However, everything i hear about the Vulpine suggests that it does no need a laser IR and a decent LED IR will do the job
@chriswinter2404
@chriswinter2404 5 ай бұрын
@brucemcpherson8832 thanks Bruce I've got a pbirx illuminator hopefully should be enough 🤞
@BrettMRC
@BrettMRC 5 ай бұрын
If you can't get a clean kill then don't take the shot. Clearly not enough resolution/clarity at that range.
@villaman2261
@villaman2261 5 ай бұрын
@@BrettMRC exactly this , totally and utterly disgraceful
@alberttreto236
@alberttreto236 4 ай бұрын
Absolutely not true. Maybe he didn’t dial it in enough, but getting a clean shot at 100 is not a problem at all.
@villaman2261
@villaman2261 5 ай бұрын
Some shit shooting I’m afraid
@andysidney7055
@andysidney7055 5 ай бұрын
Troll
@villaman2261
@villaman2261 5 ай бұрын
@@andysidney7055 Not at all why do you think he got banned from the airgun forum .
@kfcar2013
@kfcar2013 4 ай бұрын
hello Is this sight really good? Does the ballistics calculator really have reliable accuracy?
@brucemcpherson8832
@brucemcpherson8832 4 ай бұрын
Yes, it's really, really good and the ballistic calculator is reliably accurate as long as you give it accurate data to use in its calculations. The most important data are: zero distance, muzzle velocity , height of the scope above the bore, and ballistic coefficient of the bullet Less important (except for long range shooting) are: bullet weight, bullet length, calibre, temperature and altitude
@kfcar2013
@kfcar2013 4 ай бұрын
@@brucemcpherson8832 I understood What data does she need for these calculations? the resolution is 384, did you like it better in night mode or in thermal mode?
@brucemcpherson8832
@brucemcpherson8832 4 ай бұрын
@@kfcar2013 For most people the data you need to enter is: Zero distance Height of the scope above the bore Muzzle velocity Ballistic coefficient of the bullet For shooting at longer ranges you can also enter: Bullet weight Bullet length Calibre Temperature Altitude All of that data can be directly entered into the scope, although it can also be done in the DNT app and then sent to the scope by wifi The thermal resolution is 256x192, not 384 I run mine in dual mode where I can switch between optical in the main screen and thermal in the Picture in Picture window or with a quick press of a button flip that to thermal in the main screen and optical in the PiP There are examples of me doing this in the video The thermal is pretty basic and is really there to detect targets rather than shoot them with it (although that is perfectly doable at short ranges) The optical image is far more detailed than the thermal image so, for accurately placed shots, you really need to shoot with the optical image
@charnwoodvermincontrol.8855
@charnwoodvermincontrol.8855 4 ай бұрын
Some of the worst rabbit shooting you will ever see, pratting about with a gimmick.
@simonharris6705
@simonharris6705 4 ай бұрын
Awful Thermal at Resolution: 256x192 pixels Just a Blob of Heat ..Waste of Time
@brucemcpherson8832
@brucemcpherson8832 4 ай бұрын
You get what you pay for. The thermal is not designed for long range shooting - it's designed to detect thermal hot spots which can then be confirmed with the optical channel. As can be seen from the video, the thermal channel is more than good enough for close range shots The Thermnight is primarily designed for air rifle and rimfire shooters - and in that area it excels - it's not deigned for use with centrefires shooting long ranges
DNT Thermnight TNC225R, TNC335R & TNC635R daylight comparisons
21:23
RussDouglas 222
Рет қаралды 12 М.
DNT Thermnight TNC 635R : Pre Release Exclusive Footage, check description
13:42
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
81 NIGHT CREW KILLS. Trust me.......you have time!
13:05
Night Crew
Рет қаралды 20 МЛН
How Much Does Thermal Resolution Matter?
13:03
4MR Ranch
Рет қаралды 19 М.
O4 Lens Mod Adapter Tutorial
1:09:03
DrONeVan
Рет қаралды 2,6 М.
Arken Zulus 520HDR ballistic calculator in operation
3:43
Bruce McPherson
Рет қаралды 8 М.
RABBIT HUNTING with the DNT THERMNIGHT and 17HMR
14:31
Lancs Vermin Control
Рет қаралды 30 М.
RIX STORM S6 | BEST ENTRY LEVEL THERMAL?!
15:50
HansETX
Рет қаралды 18 М.
Differences in the PVS-27 and the PVS-30
14:27
Sure Shot Night Vision
Рет қаралды 1,5 М.
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН