DO IT YOURSELF SPARK PLUGS & OIL CHANGE ON 2018 YAMAHA EX /TR-1 MOTOR

TODAY IM CHANGING MY OIL AND SPARK PLUGS ON MY 2018 YAMAHA EX DELUXE. TR-1 MOTOR I’m using Yamalube 10W-40 4w and NGK Spark plugs. My extractor is from Matco Tools.
rivaracing.com...
rivaracing.com...
rivaracing.com...
#OILCHANGE #HOWTO #YAMAHAEX #TR1 #JETSKISERVICE #SPARKPLUGS #runthewater #rivaracing #Rivamotorsports

[@naqazad]

I have an EX as well. You made it really easy, I am hoping to do my own oil change next year. Thanks!

[@saturnreturns613]

I just did new batteries, plugs, oil/filter on my (2) vx cruiser ho’s @ 35 hours. Starting 4th season and super easy to do. Saved myself easy $500 in just labor.

[@centralcal6604]

Thanks man I'm changing my spark plugs out next!

[@williamdussault9093]

Just did my own oil change on my fx cruiser svho and spark plugs was super easy and put a new battery as well runs like a top

[@dpoulson]

Where can I pick up the oil extractor the you used with a cordless drill?

[@grahambate3384]

gr8 video bro, over $400 AUD here in Australia. cheers

[@Junsworld]

Thank you I appreciate your love Brother

[@mikesimmons4456]

Great video add! Thank you kind sir. Yes, like below, need some tools I guess... oil extractor is slick. Thanks.

[@In2investing]

Just check those plugs after a couple hrs, looked like you didn't torque them down enough. All plugs have crush washers and when new you need to "crush" them when installing. A torque wrench is best for ppl who don't have a good feel of when the washer crushes and the plug actually gets tight. And by all means DO NOT overtighten them or you can face serious damage.

[@ChuckKC]

Thanks for the vid bro. See you out there on the water soon.

[@KirillGubernov]

In case anyone wondering - manual calls for 25 N·m (2.5 kgf·m, 18.4 ft·lb) torgue on spark plug

[@KirillGubernov]

Oil filter is also 18 ft/lb torque - use small torque wrench (i.e. bicycle tool kit) so the you right in the middle of the torque wrench adjustments (don't use the torque wrench designed for car's wheels because it's not accurate on low values)

[@ksmith8160]

Yamaha service manual for a 2018 VX with this engine says 17Nm / 12.5 ft-lb for the oil filter.

[@bryangarnica2287]

Gonna be doing this pretty soon, thanks for the video.. hope I get it right 🤞

[@SP-tm7sd]

Very well explained, thank you bro!

[@jesuslongoria4067]

How long do you run the ski to warm it up ??

[@brianjonna]

I'd love to learn about this "oil overflow hose", how it is plumbed into the system and what its purpose is. Do you (or anyone) have a link to some reputable info about it?

[@armandoruiz2089]

Cool. Video. We'll. Spoken. What. About. The. Spark. Plug. Gap. ???? Nevertheless. Good. Info.

[@bobbys_world1ps476]

Do you have any upgrades done to this ski?? Ride plate or stage 1 possibly? I just bought 2020 exr and looking to upgrade but I just need to know it will be worth it before I do? Thanks in advance

[@jasonw6993]

FYI - Oil doesn't get thinner as it gets warmer

[@waynevandermeer3139]

Wish you would of shown your trick to getting the spark plug out on the right. The one that has part of the fiberglass body over it. I’m actually thinking of drilling a hole thru there to drop the ratchet extension down. ?????

[@Junsworld]

All you need is a short extension.

[@JohnBanchs1223]

Saludos, cada cuantas horas se le tiene que hacer el cambio de aceite y filtro y de espares Tengo un EX Sport 2017 y solo tiene 45.7 horas también quiero hacerle unos cambios. 🇵🇷

[@donvollmer]

Great video! Thanks for putting it together. I'm curious why you start the engine before turning on the water hose and then turn off the water before shutting down the engine.

[@Junsworld]

You can damage the engine internally if you don’t start your engine before running water.

[@benearle8689]

It's in the yamaha manual. You can force water into the engine and damage it if the engine isn't running while the water is on.

[@grahambate3384]

all ski manual tell u to do it, listen and learn young grasshopper

[@excursion33]

I read somewhere that spark plugs for the wave runner should be torques to 13ft/lb. do you know if this is correct??

[@seadoo4life127]

Should I wait until the season is over? I have 11 hours on my ski. Where did you get the filter wrench from? What size is it?

[@angeltime513]

Im get wster in my engine 2118 yamaha ex sport jetski what did i do wrong

[@Mad-i134]

@ minute 2:54 what is that black cover called?

[@Gman-qm6bv]

Thank you!

[@PianoUniverse]

Do you get a high oil level prior to running it after an oil change?

[@alilabel305]

Do you have the link for the spark plugs and how many spark plug is it 3 or 4?

[@Junsworld]

alilabel305 For the TR1 motors it’s only three spark plugs. rivaracing.com/i-24082577-ngk-cr9eb-standard-spark-plug.html

[@alilabel305]

Jun's World Thank you for the quick. Reply love the video!

[@Trev3813]

Great video as always. Nice to see a little but of variety!!

[@Junsworld]

🙏🏽🙏🏽🙏🏽

[@jessysoto503]

Where do you get that oil extractor?

[@Junsworld]

Got it from Matco tools

[@jessysoto503]

@@Junsworld awesome thank you !!

[@jessysoto503]

@@Junsworld can I have to the tool number please

[@Mrtoledo25]

thank you!

[@amineb4629]

Hi, can you do it on a HO please

[@redrightreturn1085]

Why do you have so much water in your bilge man?

[@briangutierrez8886]

Is that water inside his hull?

[@mikeamato7431]

Thx for this video bro. Quick question though. I noticed that you didn’t use anti seize on the plugs......Have you ever had any problems? Some say to use anti seize and some say not to.

[@Junsworld]

Mike Amato i have never heard of that. I may have to look into that! Thats man!

[@jsego08]

What speakers and rack do you have?

[@Junsworld]

Speakers are made by Power Acoustic and my rack is from www.Shorlockanchors.com

[@markmcmanaman1282]

Thanks for this video - is it a must to put some of the new oil in the overflow hose?

[@Junsworld]

No you dont have to

[@markmcmanaman1282]

Got it & thanks again for the video!

[@AlejandroBonillaBeeche]

Nice vid! Thanks

[@Junsworld]

Thank you

[@benny9513]

Great video... where do u buy your oil kit from

[@Junsworld]

Riva

[@4eyefox79]

A June as our thing been going thanks for your video by the way where did you get your extractor

[@Junsworld]

Thank you 🙏🏽 i got the extractor from Matco Tools part number PK71196

[@boandjill]

@@Junsworld I had this one and DO NOT recommend it. www.amazon.com/Performance-Tool-W54170-Extraction-Automotive/dp/B00R8FIYFS/ref=sr_1_14?crid=3453YS38UC127&keywords=oil+extractor&qid=1583355055&sprefix=oil+ext%2Caps%2C165&sr=8-14 Trying your model next :)

[@Junsworld]

Yeah I heard alot of bad things about that pump

[@ryannestamper3222]

@@Junsworld I bought the cheap one he is taking about and could only get about 2 quarts same as a lot of other people on 2 oil changes .. so I'm guessing this Matco extractor pulls more somehow?

[@nes_954]

good shit fam!

[@Sizzerb81]

👍🏼

[@litorivera2528]

You don’t gap the new spark plugs?

[@NolaH-sb4vf]

I was wondering the same thing

[@marykeith4801]

I need some stickers for my kayak

[@marykeith4801]

Call me for my address to send stickers. 3155677040ask for Mike Cronin Mary's man no that's is a pic of my girl

[@marykeith4801]

I have never been to Florida but want to go down there and do some fishing and kayaking and maybe a little ride on a ski. I want one to go fishing with so I can get places faster than my yak but I have had 3 spinal fusions and about to have shoulder surgery in June and my birthday is June 3rd

[@marykeith4801]

I watch two or three channels of KZbinrs from Florida. I watch you blue Gabe and cleetus McFarland . I have family that lives down there. But I have never been there before and would like to take it off my bucket list of places to go in fish there's a few species that live down. A fish that I'd like to catch. Oh and Bruce Willson. He is the one who started will it start , now I'm not impressed with his latest stuff.

[@davidcruz2422]

Yo how much them jet ski stickers u got on ur ex sport needz that on mine let me know

[@skydrol13]

is that water inside the hull normal? noob here

[@Junsworld]

The water was from me washing the motor after riding in salt water

[@dannypacheco9935]

Can you mess up the Jetski by washing the engine ? What do you spray to get rid of the salt and then keep it looking shiny new?

[@Junsworld]

As long as your motor is off when you’re washing it it won’t cause any harm to it I basically use Dawn soap and wash the top of the motor and I sprayed it down after that I spray WD-40 marina Lubrication spray all over the motor to keep it from rusting

[@dannypacheco9935]

Appreciate the advice man thank you by the way your video was really helpful just did my oil change and changed the spark plugs as well. Thank you keep it up bro thanks

[@torqingheads]

Torque the plugs to 12nm.