DO NOT USE DA Integra Trailing Arms! & How to Install Energy Suspension Trailing Arm Bushing

Рет қаралды 6,610

Budget Gears

Күн бұрын

Пікірлер: 28

@crxseth 2 жыл бұрын

Just ran across your channel and it’s very similar to mine. Keep up the great work!

@BudgetGears 2 жыл бұрын

Thanks Seth! You do a lot more cool stuff on your channel! I'm so jealous of all your garage space. 😂

@crx9610 3 жыл бұрын

Nice video,thank's. And best wishes from Germany😁

@BudgetGears 3 жыл бұрын

Thanks! 😁

@andrewburant3579 3 жыл бұрын

you are quite welcome, enjoy those arms :)

@MatthewColtrane-bm6cn 9 ай бұрын

So wait, you can use DC teg trailing arms for EF’s? And that way retain their disc brakes?

@BudgetGears 9 ай бұрын

Yes, you can use EG and EK as well. They all have the same geometry except for the DA. DA is the odd one out of the bunch.

@Aye_Bear 3 ай бұрын

Dang it... I just bout a set of the Da trailing arms.. So will the DC trailing arms use the same spindle/or brake caliper, and rotor ? .. I guess I need to buy some DC trailing arms..

@BudgetGears 3 ай бұрын

Everything was interchangeable between the DA and DC trailing arms, but it is weird that the part numbers are different. I used everything from my DA arms on the DC arms. You can pretty much use any of the Civic or Integra with disc trailing arms. The only odd ball was the DA. Also, you can use the DA arms just you'll have a wider offset.

@ECRick1682 3 ай бұрын

Will 1994 Del Sol trailing arms with a disc setup work on a 91 sedan? A friend has a set hes willing to sell to me

@BudgetGears 3 ай бұрын

@@ECRick1682 yes, those will work perfectly. The offset would be the same too. Only trailing arms with wider offset are the 90-93 integra. Every other disc trailing arm would be fine. You'll need longer ebrake cables though. Cables from a 4 door integra should work.

@ECRick1682 3 ай бұрын

@@BudgetGears great, thanks for replying!

@leoguardado13 Жыл бұрын

Actually you can mount the spindle only on to ek trailing arms and your done old man taught me that who would of thought😅

@BudgetGears Жыл бұрын

That's correct. You can actually bolt spindles onto any of the 88-00 civic/delsol drum trailing arms, but if you're already buying disc trailing arms, you might as well just get non DA ones and just bolt them up. The process of removing the spindles isn't always easy since they're really tight or seized on there.

@needles300 2 жыл бұрын

I see your bc plates, are you by any chance apart of the bc ef club?

@BudgetGears 2 жыл бұрын

I follow the club, but I haven't been to any meets yet. They look like a bunch of nice guys. One of my friends has been to some of their meets. I may go in the summer though.

@oldskool1979 3 жыл бұрын

No DA trailing arms stick out further or makes wheel stick out further...get EF Civic sedan EX or 90-91 CRX Si !

@littlejapanesehotrod 3 жыл бұрын

But a simple way to get the right track width is to use any ef/eg/Ek and DC trailing arms and just use da spindles .because the crx and sedan are extremely rare to find now

@oldskool1979 3 жыл бұрын

@@littlejapanesehotrod Rear drums are food enough for daily !

@BudgetGears 3 жыл бұрын

That's what I said in the video. But any 88-00 civic trailing arms or 94-01 integra trailing arms will work for disc conversion.

@littlejapanesehotrod 3 жыл бұрын

@@oldskool1979 I know they are but when you did the da trailing arm set up long as time ago .. some don't like the look of drums aswell

@Needsoles Жыл бұрын

I am having this issue. I have da trailing arms on my crx. It made it wider. Which wasn’t an issue until i recently bought new wheels.. so if i got 92-00 or 94-01 trailing arms it would be less wide?