8 BRANDS OF COILOVERS ON THE SHOCK DYNO!!! WORLD FIRST TEST

I am pretty sure this is a world first Maxpeedingrods shock dyno test, Between following:
OEM HONDA
BC RACING
BILSTEIN
CUSCO
AMR ENGINEERING
MAXPEEDINGRODS STANDARD
MAXPEEDINGRODS NEW BUDGET LINE
SHOCKWORKS
***HUGE THANKS TO CHRIS FROM SHOCKWORKS FOR GIVING UP HIS TIME & WORKSHOP TO PERFORM THE TESTING!!!!!!!!
SHOCKWORKS LINK: www.shockworks.com.au/
00:00 INTRO
03:30 CHRIS EXPLAINING HOW THE TEST WORKS
11:42 BILSTEIN TEST
14:23 CUSCO TEST
17:00 SHOWA OEM HONDA
19:10 AMR
22:25 MAXPEEDINGRODS T5 YELLOW
25:03 MAXPEEDINGRODS BUDGET PROTOTYPE DIDNT GO INTO PRODUCTION
27:52 SHOCKWORKS TEST
30:50 BC RED
31:53 RESULTS AND WINNER
33:21 CHRIS'S CONCLUSION
34:41 WRAP UP OUTRO
37:21 CRASHED SHOCKWORKS STILL BETTER THAN ANYTHING ELSE
**THANK YOU TO EVERYONE THAT HAS LENT OUT THE COIL OVERS FOR TESTING !
*A HUGE THANK YOU TO MAXPEEDING RODS FOR ALLOWING THE TEST
WEBSITE LINK: au.maxpeedingrods.com/
MAXPEEDINGRODS coilover link：bit.ly/3ux13L9
15%off code：tristan1
for US:
15%off code：tristan1
US coilover link：bit.ly/3812kkb
for UK & EUROPE:
17% off code: tristan1
UK coilover link：bit.ly/3kzlYZL
Check out my website for merch and the best parts available for your builds
spoolup.com.au/
check out my channel here -
www.youtube.com/@TURBOTRISTO?...
Shout Out To The Channel Supporters
RACEWORKS
PROTEX Brakes
T7 DESIGNS
COMPLETE AUTOPAINT SPRINGVALE
BURSON AUTO PARTS SPRINGVALE
Below are my past & present builds
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan BUDGET KSWAP 275kW
*2012 Honda Accord Euro K24 CU2 140kW Tuned
*2003 Honda Accord Euro CL9 Track Car AKA RHONDA 140kW Tuned
*1987 Holden VL Commodore Turbo Resto Mod Build
*2000 Honda Civic EK D16 N/A SOLD
*1995 Honda Civic EK4 B16A VTEC SOLD
*Toyota SW20 MR2 SOLD
*1990 BMW E30 318 M54B30 SWAP

[@TURBOTRISTO]

Final Results 1/Shockworks 2/Cusco 3/Showa OEM 350,000kms 4/Bilstein 5/New Maxpeedingrods 6/ BC Racing 7/Maxpeedingrods 8/AMR Engineering

[@danielarnold7466]

Nice winner shockworks.. shame it wasn't the maxpeedingrods

[@TURBOTRISTO]

@@danielarnold7466 I think we all would have fainted if that was the case, I love my maxies but after riding in a car with shockworks coilovers I can safely say shockworks aren’t on another level they are on another planet by comparison I didn’t know suspension could be that good they truely are amazing all custom tuned

[@danielarnold7466]

@@TURBOTRISTO well in that case... I look forward to when your able to give away some of those bad boys when your famous 😉

[@jonohno]

I'd love to see the results for a kyb and Monroe and Koni. Thanks for video Tristan. Super informative. I have often thought a spring and shock would be better performing, even if it didn't have 36teen adjustability.

[@findtherightbeat]

Which is why many EG/DC Honda guys ran the OEM ITR spring/shock combo :) EDIT: I was surprised with the AMRs, but I think it has a lifetime warranty, would be nice to do a re-test. Probably with a Koni yellow too.

[@Busydadgarage717]

The results of this test were shocking! The winner should strut their stuff! I am sure the runners up will spring back. They all will have to deal with their own bumps in the road though. This video definitely didn't dampen my spirits!

[@TURBOTRISTO]

Very clever my man

[@Busydadgarage717]

@@TURBOTRISTO my wife reaction was great. "HA.....HA.....HA.....you are SOOO FUNNY."

[@chuckknowles1991]

The losers will no doubt bounce back, perhaps too much. I thought the competition would be stiffer. Nothing worse than the soft bigotry of low ride expectations.

[@damcleandetailing]

Chris did a great job not only explaining the shock dynos and why a certain brand performed better than the other, but he stayed professional and did not bash the budget MaxpeedingRods which I think would be very easy for most people to do. That’s for this informative vid Tristan!

[@TURBOTRISTO]

Not a worry man! Chris is very professional

[@aaronw6325]

I have been fitting shockworks products to a customers car. I have had several cars with different coilovers but have never driven with anything like the shockworks before! Ive definately learnt from this video, i was unaware that the shock is able to give body control. I thought that was purely upto the spring and swaybars. Thanks very much for taking the time to make this video guys.

[@TURBOTRISTO]

I went on a test drive in a shockworks custom tuned set up I have never felt anything like it

[@aaronw6325]

Same! I would have liked higher spring rates for my own car. But for my customer, it was the ultimate road car setup. They dont look super flashy or anything on the outside but its the tech and RnD thats inside them is where the money is! I do have some really weird old HKS/Kawasaki s13 coilovers with inverted tube shocks that looked like they would be good but where terrible on the road if you ever want to run another random bunch again.

[@jinxtacy]

Thanks for producing this content and having Chris walk us through the results. I have seen some say that Bilsteins with lowered gas pressure are a really solid setup. I think they may be onto something as Bilsteins on the street can be a bit harsh and have quite a bit of feedback in comparison to a Koni yellow which does ramp up hard, but overall is more comfortable until it's not.

[@TURBOTRISTO]

That’s is all true I have switched my coil overs out to koni now haven’t driven on them yet but I am excited

[@ahmetay9948]

You have answered a massive question for a lot if civic drivers that have always wanted the best bang for buck when it came to ebay coilovers. You legend!💪💪🚗🚗

[@TURBOTRISTO]

Thanks brother

[@nobodynoone2500]

Yellow Bils or konis are best bang for buck if changing springs, OEM decent if stock. Shockworks are nice af.

[@Minecraft-md6fs]

Great video thanks alot for going to the effort to teach us all about how shocks work and which ones are good and how the cheap ones are not as bad as many people think.

[@TURBOTRISTO]

You are welcome bro

[@TranceFur]

Soooo much valuable information and knowledge in this video! As a suspension nerd, this is just awesome.

[@TURBOTRISTO]

Chris from shockworks is a guru

[@crxdelsolsir]

Thank you guys for this test/review which is not only without any self interest but really objective, technical and really untainted results. It seems "Made In Japan" is the best no matter the brand (Showa, Cusco, Buddy Club) or age (20 or over 30 years). I am sure KYB and Tokico would perform similarly. Safe Real value over time. Mid range price may be a hit or miss. Cheap is just good for stance, mild casual use and short term use.

[@TURBOTRISTO]

I am Glad you could see what we were trying to achieve thank you for watching mate

[@BMXunion1]

Appreciate the content. Made the decision a bit easier. Keep up the great work 👍🏻

[@TURBOTRISTO]

Too easy mate thanks for watching

[@fapeSTA69]

Woo Giveaway~! Keep up the vids!

[@TURBOTRISTO]

Thanks man

[@flappingduckling]

Give this guy the coils!

[@florencechau5174]

Good luck mate

[@jovenb8958]

Love it

[@BlacksweaterConcepts]

Yeeeeeeer

[@IsaacKelly2]

awesome vid man! helped heaps, appreciate the effort that went into this!!💪

[@TURBOTRISTO]

Thank you! Sorry I didn’t adjust the fps and it was flickering

[@IsaacKelly2]

@@TURBOTRISTO no worries man, still a quality vid

[@Harry-et9ok]

New coils would really level up my CXI ive been dailying for the past 3 months, cheers for the good content mate! Good luck to all the boys entering the giveaway!

[@TURBOTRISTO]

Good luck to you my man

[@victorlee2902]

Good luck man! You got this

[@elmaschingon8237]

I’m running the max speed black and red coilovers on my lowered Camry and I must say they perform pretty good for the price I can’t beat it. Had 2 blown shocks so anything helps. Thanks for the video man!!!! Keep them coming

[@TURBOTRISTO]

cheers man please subscribe if you havent already

[@lokisgunworks790]

im about to be ordering a set for my 6th gen camry

[@alexcorral855]

If you see this how are they doing currently,?

[@froilandmarqueses3489]

Awesome content. Definitely would stop all the arguments on the Honda forums and other ones too. Explanation is excellent from Chris and Shock Works. I have been using the old style maxspeedingrods on a budget track car EK like yourself Tristan but after seeing this I think I might have upgrade to the new style. Even if I don't win I will definitely use the discount code. P.S. Bro, you need to bust more myths.

[@TURBOTRISTO]

Thanks for the support brother, after what I learnt I wish I could afford shock works they are incredible but as I have said many times maxpeedingrods seem to be working fine for me at my cars level, I would love to bust more myths any suggestions

[@froilandmarqueses3489]

@@TURBOTRISTO well, like you I've into cars for a while, I am a mechanic by trade... recently, I've noticed a lot of trolling behavior on the recent topic of Stock brakes are fine and bigger brake kits don't make better lap times... test with a control tyre of course, do a 3 or 4 part series on oem pads vs aftermarket, oem brake lines vs braided(use a control brake fluid), then move to oem single piston caliper vs aftermarket multi-piston setups...maybe talk about brake master cylinder upgrades...

[@kingjolz]

Just bought myself a 94' Civic sedan dirt cheap and I'm fn pumped to learn all about these awesome little machines! 😁

[@TURBOTRISTO]

good luck my brother! all the best , now get all your buddies to like and comment

[@kingjolz]

@@TURBOTRISTO haha thanks bro I'll try 🤙

[@alfs8]

It's a gr8 video! It's interesting to see the progressive dyno on the Maxspeed coilovers; usually, it's often found in the gravel rally dampers but it's for sure not as good as a real progressive rally damper like Reiger or FOX etc.

[@TURBOTRISTO]

Rally is something I need to try for sure thanks for watching

[@civic95reborn]

Beautifully done, I have used maxpeeding coilovers on my ED and EG civics before, I am currently using them on my EF8 as well and I have an EK4 waiting for coilovers and I would love to win a set of these🤞

[@TURBOTRISTO]

Awesome good luck mate

[@anthonyreyes288]

id like to see more shocks tested/reviewed like this. maxpeeding rods has new shocks out now and id like to see how they look on the dyno. and with all the different coilovers out on the market these days i think this would make for a good video to make every week for a few of them if you can get your hands on more coilovers.

[@TURBOTRISTO]

I will be doing more in the future i have road tested the new mxrs and they are really good interested to see the dyno results, I have my hands on all sorts of suspension daily, new video coming out soon i have the only set of KONI col overs in the country to suit civic

[@anthonyreyes288]

@@TURBOTRISTO Thanks man. me and the rest of your viewers really appreciate what youre doing here man. im subbung right now!

[@officialandr3s215]

Thank you for this, it makes the day I can afford these easier, thank you for the info!!

[@TURBOTRISTO]

Competition for free suspension is now live

[@GilliGainz]

Great timing! My stock shocks are developing some nasty knocking noises so a set of cheap coilys would be a great option!

[@TURBOTRISTO]

Good timing best of luck

[@LNRRidez]

So I've been considering these maxspeed coilovers for my step sons 95 eclipse. I think we are going to buy some and then later when he starts working upgrade to a nicer set. They have to be better than the stock blown out suspension that's currently in it. Thanks for the video

[@TURBOTRISTO]

100% they are man they are perfectly good for anything you need just not for lemans or the Indy 500 but for everything else they are fine

[@nobodynoone2500]

@@TURBOTRISTO Max Pee Ding Rods are for LeMons not LeMans.

[@lorencing]

Thanks for the video, excellent demo.

[@TURBOTRISTO]

Thanks mate

[@jeffomalley6015]

I had KYB GR2s on Eibach Ground Control coils. I loved that setup. Lifetime warranty on the shocks to.

[@TURBOTRISTO]

That’s fantastic

[@joshuacraven6206]

Honda still uses Showa (Hitachi Astemo bought them), KYB, and even ZF for dampers, these days. Showa has made some really good dampers from civics to miatas, over the years. Thanks for the quality, humble content!

[@TURBOTRISTO]

Thanks for watching man I will do more soon

[@blazeclarke]

To add to this, I've seen a few Honda models fitted with Sachs shocks from factory. Not sure if they still use those as the models I'm referring to are 5-10 years old.

[@TURBOTRISTO]

awesome good to know sachs make good stuff

[@zenstrukt]

Solid video - thanks heaps for the comparison. I've got my 10+ year old standard setup on my XR5T it hasn't failed but I feel a set of these will bring some of that enjoyment that faded a while back!

[@TURBOTRISTO]

Go for it man

[@jigsandrada974]

Very informative. Thanks for this.

[@TURBOTRISTO]

You are welcome mate

[@afrakes4510]

Dude, this was awesome info! Now I understand the difference between a good shock and a crappy one. HOWEVER!!!! You can't really perform a test like this using the method u applied. You need to test at least 2 of each brand. ie. The American model was clearly a factory defect, and IMO because of the technology (pressure, fluids, gas), it's pretty likely that there were more that underperformed or perhaps overperformed their brand just by chance. That's why you need at least 2 tests for each brand. The real lesson learned here is, you can buy good shocks and still get a bad ones and never know, sans the dissatisfaction. Looks like Quality Control is the right way to shop them out! Again, the information was fantastic! you got my sub!

[@TURBOTRISTO]

thanks boss beek! yes I agree, at the time i made this video as you can tell the camera quality is low and the lights are flickering, but all that aside I borrowed all those sets from people and luckily for me Chris from shockworksis is local and had time to do the comparison, I would love nothing more than to test 15 different brands and three sets of each all for the same car , you are 100% correct some of those coilovers were old some where new some were from crashed cars , but the info and message was all the same, when shocks leak they leak regardless of age, the factory civic shock were nearly 30 years old with over 300,000kms on them and still performed like new , there will be more videos like this coming soon

[@AliMack1]

I'm 17 and jusy got my p's with my 97 civic ek so a set of coilovers would be awesome to win also thanks for the video really informative

[@TURBOTRISTO]

Good luck man

[@AliMack1]

@@TURBOTRISTO thanks man

[@thetrueth4041]

@@AliMack1 your car would definitely benefit from these coilovers

[@Axi_0]

@@AliMack1 yooo these would be sick assss

[@AliMack1]

@@thetrueth4041 they really would

[@cjhogan71]

Yeah the old wireless Coilovers 😂 Good shit fellas giving back ❤️ Good luck fellas ❤️

[@TURBOTRISTO]

Bluetooth coilovers 😜

[@antonmealy168]

Really interesting to see the comparison & would be interesting to see relative prices & perhaps comparing @ similar damping rates where possible rather than just 'softest'. 2yrs ago found MXSR irresistible for the price for '89 Civic whose originals felt VERY soft despite no evidence of leaking. Happy for the relatively little use it gets & lower ride height if less Impressed by very short travel & rebound to cater to those who want to SLAM their cars (a worry if ED already had the shortest travel of later Integra & Civic they also claim to fit.! Makes me glad I have some Koni on CRX & some 2nd hand Koni for EG & Prelude projects, even if I will still try MXSR on that too (bought previously...& hope to fix 2nd Prelude) wonder how they compare?. Guess I'm probably not pushing hard enough to complain about 2nd hand Tein on my DC2.

[@TURBOTRISTO]

thank you for the feedback glad to see you appreciate the content for what it is, i would love to do more testing in the future this was really fun and I learnt heaps

[@Xencer]

Haha, I just ordered AMR engineering coilovers for my e36. My friend has them on his ITR swapped hatch and I was super impressed. Too bad we can't get a good comparison. A long time ago I had some TEIN SS on my honda accord, probably the best coilovers I ever had.

[@TURBOTRISTO]

Tein were the worst coil overs I’ve ever had

[@TurboV8boi]

@@TURBOTRISTO I have some Flex Z on my accord and they are pretty poor IMO. BC isn't much better from my experience.

[@MRMAN-wb1tv]

@@TURBOTRISTO I'm sure the Tein Coilovers weren't the worst, most likely it's the owner not using them properly.

[@daskamu]

@@TURBOTRISTO what was with the teins?

[@bengibson3955]

Great content guys and super informative. I’m a very amateur former club-level racer here in NSW who achieved reasonable results using the Tein Superstreets with the spring rates and valving as per Fulcrum’s setup. Oh-in a GDB WRX STI. The rear struts started leaking after about 5000km but I believe it may have been extended time between drives may have buggered the seals. I’ve had both rears rebuilt and the front left is leaking and knocking too. Have you dealt with these struts before as I’m keen to hear your opinion. I’m thinking seriously about Shockworx setup for my FG GS. Good to see they performed well, though I’m also considering Bilsteins on Kings low as it’s not a track car. Great content and I’m subbed.👍

[@TURBOTRISTO]

I would get shockworks over tein any day heck I’d get bc over tein, but shockworks are amazing all the top time attack cars run them, plus they can be valved for street also

[@finz1374]

@@TURBOTRISTO whats wrong with tein? Just bought ones for my car, toyota chaser jzx100

[@daskamu]

@@TURBOTRISTO what’s up with the teins?

[@bengibson3955]

@@daskamu I’ve had both rear dampers rebuilt and the front left needs rebuilding as well. These are Tein Super Streets with less than 15,000 km on them. I’ve found the Teins are great while they are working, in so far as they are OEM factory quiet, comfortable for the daily drive and still capable on the track for a bit of club-level shenanigans. The damping/spring rates are far from optimal for track but I’ve put down some respectable/competitive lap times on the Teins and I can “glide” over ripple strips that upset stiffer setups. The low-km rebuilds are the biggest problem with mine, but I’m probably contributing by leaving the car for weeks at a time.

[@bengibson3955]

@@TURBOTRISTO most of the serious guys and gals in the NSW combined clubs Supersprint series I used to run in seem to be running MCA although I’ve seen some very quick cars on KWs, HSDs (surprisingly good from my observations) and BC racing. If/when I get the time to get back into it, I’ll be tossing up between MCA and Shockworks for a more track-focused setup for my long-suffering bugeye Subie.

[@hondacivic2548]

I’m 17 as well & i own a 1998 honda civic lxi. Have always wanted coil overs for the ride height and performance but can’t afford them as i’m still in school. I would be really stoked to win one of the two. It would make my civic handle and look 100% times better! 🔥 Cheers

[@TURBOTRISTO]

All the best bro good luck get your friends to like and comment on your comment and you have a chance to win, my civic is a 1998 also !! But mine is a gli

[@nocaptg7726]

Yoo your civic goes hard bruva 🏎

[@nocaptg7726]

@honda civic good luck the civic would be mean with this

[@jeremiahfilipo79]

Your civic is one of the cleanest i have seen for a youngin would be really good if you get a set of these coils💯

[@hondacivic2548]

@@TURBOTRISTO Yea bro 98’s are the go! 😂

[@BKLYNSOPRANO]

Im in the process of buying coil overs .This video was great .Thank you

[@TURBOTRISTO]

You are welcome man

[@correygoffney7054]

Nice video we need more like this

[@TURBOTRISTO]

its on the cards just need to start collecting some different coil overs again

[@anakinking-hill6910]

Bro the touges about to get absolutely munched by these weapon's HAHAHA, in all seriousness tho these would help big time when it comes to track and mountain passes, my fenders are carving new tread into my tyres every time I go around a corner. They're buggered

[@TURBOTRISTO]

Hope so for your sake

[@anakinking-hill6910]

@@TURBOTRISTO hahah double wishbones only half the story when Ur stockiest are clapped

[@mrgngstr]

Hey Tristan, i already got these coilovers, i give my ticket to this guy, I hope he gets it.

[@anakinking-hill6910]

@@mrgngstr awh no way, thanks legend. Hope your going hard out there bro :))

[@anakinking-hill6910]

Forgot the part where you gotta explain why you need em, well it's the same as everyone else tbh I run mountains in my civic and just need better handling, I got Hella scrub cause I'm running some thick federals and the dying shocks in her are just trash. No other reasons tbh, in reality if I save for a few weeks I could get em but hahah

[@kseriesdan9722]

I'd love some coilovers so my kswap handles like a go-kart. Great video

[@TURBOTRISTO]

hope so man get all the family and friends to like your comment and reply to your comment, best of luck

[@midochan4830]

Thank you so much for helping us

[@TURBOTRISTO]

No dramas man

[@Bbeavis]

Thanks for doing this Tristan.

[@TURBOTRISTO]

Not a worry man

[@802Garage]

Really awesome video man. This is great info. Given the cost of MaXpeedingRods, seems it would make sense to replace your blown OEM struts with a set. Obviously if you can afford the nicer suspension, you'll get what you pay for or something like it.

[@TURBOTRISTO]

Exactly man 100% correct not everybody gets it

[@michaelcooper2762]

hey i follow you on tiktok

[@802Garage]

@@michaelcooper2762 Hey thanks! I'm gonna have full V10 Impreza and Rotaru vids on here too. 😁

[@Believer21777]

@@TURBOTRISTO @Believer21777 0 seconds ago @TURBOTRISTO I did. I got it fine. My right front oem was leaking badly I went max speed rods fro all 4 front and back and they seem great for everyday driving. I am a happy customer and didnt break my budget on a 3,400 car one deer away from being totaled.

[@mlcollingwood]

There is a reason Chris did some custom valving in my set of Shockworks dampers!

[@TURBOTRISTO]

Yeah he is awesome I can’t wait to get some

[@danielarnold7466]

Nice one dude. Would love a set, but probably more people that need em more than I do for the turbo build!

[@TURBOTRISTO]

What a good bloke you deserve them just for being humble good luck!

[@danielarnold7466]

@@TURBOTRISTO gotta be in it to win it, I guess. Cheers big ears

[@apexseeker3821]

I wish shock manufacturers would publish the types of graphs you showed. It would make shopping and comparisons so much easier.

[@TURBOTRISTO]

I Do plan to do more vieos like this

[@qleap99]

I'm not sure I follow how the Bilstein was rated lower than the Cusco when at 16:29 Chris said that, while both were a bit low on gas, the Cusco still didn't quite have the response that the Bilstein had.

[@yacka]

Just bought my first civic as a project car, some new coils would be hectic as

[@TURBOTRISTO]

Well done man

[@uselink5-75]

I have a 96 civic I really need some coil overs, I have upgraded to front and rear anti roll bars and polyurethane bushings, still have stock springs and struts. I just had it painted and have a video on here with it.

[@TURBOTRISTO]

Best of luck my friend

[@lacyfins9627]

I've seen about a dozen personal accounts, from members in a car forum I'm on, of maxspeedingrods breaking at the welds. Most commonly if there is a link bar bracket welded it breaks off. A couple said the base broke on rears where a skinny arm is welded. One person said the top cap split. Saving money isn't worth wrecking possibly dieing, get at least one step above!

[@TURBOTRISTO]

I do agree however since this test mxr have really improved we use their T6 shocks in our endurance race car hit every ripple strip and get air borne and have had zero issues, this test was done on the T3 & T4 version, they are up to T7 I have shock dynoed them and they graph as good if not better than a lot of the expensive brands in this video

[@richhuynh5905]

Just realised this is the correct video to share and comment on Local guy just building a k series EG with a modern twist Having these coil overs would help reduce the costs to get it up and running on the road! EG is currently stripped bare and getting all rust removed!

[@TURBOTRISTO]

good luck brother you will need around 100 comments on this post to win , Ill start you off with your first comment get your mates to help you

[@ets6801]

nice cock bro

[@brushofpaint]

bump - this man's love for cars is unprecedented

[@brushofpaint]

he's also pretty handsome

[@brushofpaint]

can also confirm he's already spent way too much on his EG civic :~)

[@rushb3696]

The Bilsten looked very good at the start and he seemed very happy when the result graph got displayed 13:30. How come it ended up 5th?

[@TURBOTRISTO]

Others ended up in better standing

[@FairladyS130]

Yes. The Bilstein graphs looked good comparatively, particularly in initial anti roll which is important for a track car.

[@williamstevens2923]

Just wrote off my Honda jazz (was rear ended ,can give proof) and was just looking into getting a 98 white civic sedan ! Really want a build it as it would be my second car and I feel like I can challenge myself ! Would really love some coil overs to kick them off !!!!

[@TURBOTRISTO]

well I hope you win mate all the best get all your friends to like your comment and reply to your comment

[@notimportant8120]

Very informative video buddy! Might have to make an inquiry to see if they could possibly help me out. Cheers! D16 turbo 1984 Honda city might see the light of day soon. P.S, I’m afraid of heights, so must lower my car 😂

[@TURBOTRISTO]

You will be pleased to know I am helping with the restoration of two Honda city turbos one will be modded one will be mint original and we have 2x motocompos to go in them

[@TURBOTRISTO]

Actually looking into rebuilding the factory turbo of one now, where are you located

[@notimportant8120]

@@TURBOTRISTO Brissy

[@notimportant8120]

@@TURBOTRISTO that is so good to hear man. It’s my first car that I’ve held onto since forever lol. Suspension has always been a sticking point with me. You don’t happen to know these two guys in Sydney do you?

[@TURBOTRISTO]

@@notimportant8120 what two guys

[@roli710]

Would maxspeed coilovers be able to handle canyon and mountain drives consistently?

[@TURBOTRISTO]

Depends on what you mean by consistently, as long as the roads aren’t to bumpy then there won’t be much heat in the oil or air causing cavitation

[@nitrogearaustralia3949]

VERY INFORMATIVE VIDEO GOOD LUCK TO EVERYONE ENTERED IN THE COMPETITION!!!!!!

[@TURBOTRISTO]

cheers bro

[@jasonwilson9309]

This is the best and also yes I loved the hand stuff made a lil more sense or easier to understand

[@TURBOTRISTO]

Thanks man it helped me too I feel like I have been schooled and given a suspension degree after spending an arvo with Chris he knows more about suspension than almost anyone on the planet

[@jasonwilson9309]

Yeah definitely, everything in that video is new to me so I learnt alot. Looking forward to some of your future videos

[@oldgregg5675]

My ek civic hatch needs some coilovers she a bit bounce around corners you know

[@TURBOTRISTO]

Do you like baileys

[@oldgregg5675]

@@TURBOTRISTO you wanna marry me

[@oldgregg5675]

@@TURBOTRISTO I got the funk

[@jamarose1317]

😂😂

[@sidneyaerole.1137]

Would love to win a set for my '97 EK mate! Although, I am in the Philippines, so maybe I'm out in terms of selection. Either way great videos as always. 🤘🏻

[@TURBOTRISTO]

You can still win them but I need to see how much shipping will cost, if you get the most likes and comments then I will have to send them to you

[@victorlee2902]

I also have a 97! Best of luck to you man!

[@lostkauz83]

been a while my YT brotha ! just got the old ladys MXR replacements in and am trying to hunt down you adjustment video so I dont bottom them out like last time lol , hope alls well my friend !

[@TURBOTRISTO]

There is a recent video I did on a white eg, you can check out on the adjustment

[@lostkauz83]

@@TURBOTRISTO thank you sir , information received and applied

[@NjBoRi973]

I really need help finding struts for my 07-08 infiniti g35x sedan awd. I see all full complete struts coilovers then i find sum with the rear strut and spring separated. Which is better

[@TURBOTRISTO]

Just buy some new bc and be happy with them man very good budget upgrade

[@MichaelWilliams-ph7nn]

Would these fit on an R34 sedan? I'm trying so hard to get parts and convert to manual. I tried getting R34 in Canada but they are out of stock. I'm not desperate, I just like watching creators whom have great content and are down to earth. Most Aussie's seem this way. I guess when almost everything can kill ya you need to have a more relaxed outlook on life, lol. I wish all the best of luck but to be honest I want the damn things. I also just got screwed by contractor whom dusted me and my garage build I sadly work in an unpowered oversized shed. Sigh.

[@TURBOTRISTO]

Well man Canadians are just like aussies in my experience good chill people, I used to own an r32gtr and an R33gtr great cars these will not fit, however skyline coilovers are reasonably cheep if you join some skyline forums in australia you will find people to help you out ❤️🇦🇺

[@jarrad5723]

I’m desperate for some ebay coils for my ‘99 EK sedan over in Perth 🤣🤣🤣 I’m so broke, and it’s so tall I may as well be driving my old CRV

[@TURBOTRISTO]

Best of luck brother

[@anakinking-hill6910]

Hahah we in the same boat 😉

[@noahbostelman7675]

Best off luck bro ( ^ω^ )

[@markhingst5368]

You take that back cr-v's are awesome

[@victorlee2902]

Good luck bro!

[@RollingRoadEFI]

I wonder about the newer BC Racing stuff and the external reservoir ones. That's what I've got, dare I say they've been great. They sell for almost $2k USD. They're on my road course car. I wonder what it costs to ship them to you lol.

[@Blakek.]

I'm not a honda guy, but I am a car guy. Great info! Thanks for sharing.

[@TURBOTRISTO]

Thanks for watching!

[@thatoneguy454c]

The maximum pee rods are not all that bad for the price. I ran a set for a few months on my Bugeye WRX while I was deciding what I actually wanted to go with. They were actually surprisingly OK. If you just need something quick because your OEM ones took a poop they will serve you just fine. You can even get a bit sporty on them as well lol.

[@TURBOTRISTO]

They are 3 times better now

[@zacbone7766]

@@TURBOTRISTO would love to see updated results for them ;)

[@TURBOTRISTO]

latest video with the thumbnail "runs so smooth" has updated dyno sheets

[@thatoneguy454c]

@@TURBOTRISTO yeah I used the COT6 coilovers and they were super easy to adjust and install. If I was playing to do some sporty driving ("doing turbos" is what my girlfriend calls it lol) I would just adjust the knobs to stiffen them up and for everyday driving I kept them somewhere in the middle of the adjustment range. They actually looked pretty good as well, the blue and black looked really good with my blue brake calipers and gunmetal gray rims. They are definitely an upgrade from the OEM suspension that came on the 2nd gen wrx's. I eventually upgraded to a set of Tein coilovers and the only real difference was that the adjustment range was more dramatic and they felt less bouncy and at their softer settings, but honestly there wasn't actually a huge difference in the overall performance.

[@TURBOTRISTO]

thats awesome news man

[@Built_it_by-alex]

In the near future I'm thinking about getting a set of the max coilovers but after looking at this I'm kinda disappointed but my question is...how would the coilover behave with the spring on it and will the spring rate help in anyway? I'm on a tight budget 😅

[@TURBOTRISTO]

I will be giving away a set of the coil overs soon

[@dalefernandez129]

This is great I'm in two minds between these cheap coils and Whiteline springs for my lancer Vrx Very helpful content guys I've subscribed. P.s where about in Melbourne are you from?

[@TURBOTRISTO]

From sprinvale mate thanks for the subscribe 💚 whiteline springs will be great but they might blow your shocks because stock shocks aren’t designed to be lowered, by the time you buy lowered shocks you might find it’s better off to go with some coil overs

[@dalefernandez129]

@@TURBOTRISTO cool not far away I'm in Oakleigh..yeah alot of people have just run these Whiteline springs in their lancers on the OEMs with no issues. It's about a 35mm drop in height all around so nothing to crazy, so I think there is still quite abit of travel in the shocks. This car is a just a daily that gets driven to work and back each day, nothing hectic like track time, I do love the height control of the coilovers to be able to dial in that perfect height, I just need to decide if want the comfort of springs over the slammed look which is obviously going to be alot more of a ruff ride.

[@TURBOTRISTO]

@@dalefernandez129 comfort is king man 30mm drop is sweet I did my mrs accord 30mm and it blew out a shock instantly, I work at koni and they say that anything over 30mm should need coil overs or custom shocks because the stroke isn’t long enough to absorb the bumps

[@markhingst5368]

I be maxneeding these maxpeeding coilovers for my B20 Turbo CR-V project! 👍🍻

[@TURBOTRISTO]

Does crv and ek fit? Best of luck man and great puns

[@markhingst5368]

@@TURBOTRISTO yeah they do fit the crv but iv since been advised I might be better off with accord or crv specific ones due to weight and spring rates

[@stonebrother2921]

I would love to win a set of the newer version of the coilovers for my 2000 ek hatch. The only thing I've ever won in my life was a Mulan cap from Video Ezy in 1999 hahahaha. It was a colouring in competition lol.

[@TURBOTRISTO]

Nice bro haha best of luck on the coil over competition this one is easy if you follow the rules

[@megsiimesi]

Good luck!! I hope you win some new coilovers!!

[@stonebrother2921]

@@megsiimesi Would make my civic look awesome. Wouldn't it?

[@stonebrother2921]

@@TURBOTRISTO Thanks Mate. Enjoying your videos nevertheless :D

[@megsiimesi]

@@stonebrother2921 it really would!! :D

[@StopTargetingOurKids]

We didn't get a coilover test just a shock test, would be awesome to see a complete test

[@TURBOTRISTO]

besides fitting every coil over to the same car and doing a set track in controlled weather and temperatures, with fresh tyres on each test there is no way that it could be a fair test, this is the fairest test known to man, the shock dampening rate is the only factor worth measuring, spring rates can be swapped and changed, re valving and custom valving shocks in almost all cases in not possible

[@StopTargetingOurKids]

@@TURBOTRISTO but isn't the springs what causes the ricer bounce on the cheaper coilovers?

[@badgermetal]

@Kevin Hawthorne cheap coilovers usually have a combination of too high spring rate paired with poor damping performance. 12k springs on any shock will feel bouncy compared to stock which is about 700, especially paired with a small shock . They use super stiff springs so when you slam the car on the ground the tires won't have the travel to hit the fender. Imo the cheap ones are for people that want to lower their car and don't mind buying new ones when they die.

[@nandorendan]

Great video, learned alot 👍

[@TURBOTRISTO]

So did I bro

[@Iseenoobpeoples]

I got a Toyota 86, I started by replacing the OEM suspension with the BC RACING BR kit, it was a small upgrade but still I was disappointed, then I bought the CUSCO Zero 3R kit, now we are talking about a product that actually work, one word capacity.

[@TURBOTRISTO]

That’s good to hear you love your Cusco mate

[@Iseenoobpeoples]

@@TURBOTRISTO It was almost 3X the price to get the CUSCO build to specs, but the difference is night and day so it is worth it. I also bought their clutch pack limited slip differential, incredible product, it's basically a new car, supercar :P This video is very good, maybe the best video on damping available on KZbin, thank you!

[@TURBOTRISTO]

wow that is a great compliment thank you

[@Secretlovechild]

Would love these coils on my 1990 Civic! It’s currently a monster truck! 😅 EDIT: If I win pls can I get the new max speeding ones

[@TURBOTRISTO]

Good luck bro low is the go

[@zephaniahjoy777]

Goodluck!! You deserve it

[@Secretlovechild]

🚀🚀🚀

[@Secretlovechild]

@@TURBOTRISTO thank you! This is the way !

[@Secretlovechild]

@@zephaniahjoy777 thanks Zeph!!

[@feeltrainstudios3983]

Hope I could win the new design for my Civic and test them on track. I'm in Melbourne so you could help me fit it up!

[@TURBOTRISTO]

Sounds good to me mate just gotta get lots of likes and comments

[@coreyfreeman6226]

Thanks guys. Better to get Bilstein B8 Performance Plus with lowering springs then vs getting these cheap coilovers on my 2023 GR86

[@TURBOTRISTO]

thanks for watching

[@jeremyandrassy5764]

ive followed you from the start .you do some awsome content.id love a set of coil overs

[@TURBOTRISTO]

best of luck mate you have 4 days to put as many coments and likes under this comment as possible get your friends and family on the job

[@oldgregg5675]

Need to lower and stiffin my ek civic

[@TURBOTRISTO]

Every one does

[@Rollo472]

You'll definitely gap the swift up scaly now bro

[@oldgregg5675]

Old Gregg saying goodnight and keen to win some coilovers wish me luck guys 👌👌👌🤟🤟

[@TURBOTRISTO]

Good luck buddy

[@sammydunc1037]

Good luck old Gregg x

[@oldgregg5675]

Thanks Sammy boii

[@cliffableabel1326]

Good luck my man, your civic needs them for sure lmao What kinda driving are you going to be doing?

[@oldgregg5675]

@@cliffableabel1326 Hill climbing up sealy lookout

[@traolcoladis2418]

Yep. Max speeding rods can take a hike. It would have been good if you could have tested new.. but seeing OEM hold up well after 300,000km and out perform new max speeding rods… re affirms I’ll. To buy them. I will check out shockworks to see if I can afford them for my two CELICA’s. ST-184R and 2ZZ-GE

[@TURBOTRISTO]

Man they are not expensive for shockworks and they are truely the best coilovers on the market hands down they out perform bilstein and mca

[@nobodynoone2500]

Time to revisit. Add KONI Yellow and the latest MaxPeeDingRods offering. I hear they "upgraded" them again. Maybe throw in some budget dual-tube style, and the latest bargain monotube. Glad this vid shows my usual "Throw some yellow bils on it" for street cars, and "Don't you dare replace honda OEM shocks unless they are blown or bouncing" advice is sound.

[@TURBOTRISTO]

there is a video planed , just gotta find the time

[@oldgregg5675]

Got some hardened bush's in it and coilovers is all I need

[@TURBOTRISTO]

Best of luck man

[@jamarose1317]

Good luck

[@jigglerish]

I like the confidential information on the wall at 28mins. Might need to edit the video if they want to keep it

[@TURBOTRISTO]

A name badge?

[@jigglerish]

@@TURBOTRISTO the data sheets with sizes and part numbers of their shock

[@infotechplus1950]

@@TURBOTRISTO at 26:30 CONFIDENTIAL! Chart to the left.

[@_empmedia]

A set of coilovers in my EK1 build would be fantastic!

[@TURBOTRISTO]

Good luck bro

[@0Ninja0Dude0]

Wow this is super interesting I wonder how other brands like truhart, rev9, tein, fortune auto, Meagan racing, and function and form all stack up against the stock. I've seen so many ppl advocating for the maxprods I'm glad I never bought convinced by their self justifications

[@TURBOTRISTO]

Great point!, i still advocate for mxr purley based on the pricing, they arent bad, they certainlky arent good, but they arent bad that for sure they did better or close to some more expensive coilover kits

[@jedbeach5284]

It's kinda crazy how maxpeeding rods has the amount of settings for price imo

[@TURBOTRISTO]

It really is

[@jedbeach5284]

Bruh

[@jedbeach5284]

Woo

[@jedbeach5284]

Win

[@jedbeach5284]

Is this allowed?

[@robertfayad9222]

Hope I can win this giveaway, would mean a lot to me 🥺 can’t afford new ones and I have had a life threatening accident from faulty suspension failing and sending me into a guard at high speed. Would love to put some max peeds in my turbo civic much similar to turbo tristans! Located nsw! Unfortunately 🥺

[@robertfayad9222]

Like for +69 HP

[@swordartonline556]

Good luck!

[@TURBOTRISTO]

That’s not unfortunate you can still win them mate just get the most likes and replys and you win

[@Robbie_F]

Thanks man, sorry this is my acc it wouldn’t let me post the comment on this acc, was very lucky to be alive. Never trust cheap suspension, I do hope the people realise this would be a great thing for me and my build. I’m very dedicated to my Honda Civic 🥺

[@robbyfarah2268]

Good luck Bro! Sorry to hear about that :( at least your still here that’s the main thing.

[@iiNgONYaMa]

Have you tried ab racing? What are the cheapest adjustable dampening ones you have heard of

[@TURBOTRISTO]

Maxpeedingrods I think are the cheapest, I only tested the ones I could access locally all these sets were on loan

[@benboaz7853]

I've learnt alot there... 👍

[@TURBOTRISTO]

I’m glad I could help you mate

[@DAOTrademark]

I want MaxSpeed Coilovers because they match my personality: slow, behind the competition and not sure if they will last very long. *Edit: If I were to win. I would like the new anodised version due to dyno results.*

[@catherinedao3721]

Not sure if srs 🤣

[@DAOTrademark]

@@catherinedao3721 DEAD SERIOUS.

[@lisatruong4684]

I think Maxspeeds > you tho

[@DAOTrademark]

@@lisatruong4684 That's a fair call. At least they can stay long and hard.

[@CielSomnus]

No comment.

[@oldgregg5675]

Would be awesome if you sent me some

[@TURBOTRISTO]

Follow the rules they could be yours

[@keza4win7]

hey mate, just a comment re the flicker in the video. If you were unsure how to fix that/what is causing it.. it is the framerate of the camera not matching the stupid 50Hz frequency the Australian power grid uses. you won't notice it with a bulb or normal light, but with fluro's they turn on and off constantly at the 50 Hz frequency as the power grid. This means if you have the camera set to record at 30 FPS or 60 FPS it wont match the 50 Hz frequency of the fluro and cause the flicker. If you set the camera to 50 or 25 FPS that should fix the issues as it will be in sync with that 50 Hz. Sorry for the long message, just thought it may help with future content :) Loved the video great content!

[@TURBOTRISTO]

Thanks Kevin I wish I had this comment 6 months ago brother you would be a life saver!!! My mrs only just fixed it last week for me haha I’m hopeless with tech haha thank you for helping me out, you are a legend

[@kmook76]

We need testing for all the shocks as part of a professional review service. It would be great to do a wear test on them too.

[@TURBOTRISTO]

The more people send me the more I can review

[@magoo4381]

Hi my name's Michael and I already use maxpeeding coilovers (original ones) in my hillclimb b18 eg hatch to beat Porsche GT3's , Elfin v8s and other high end purpose built race cars 😅 their confused sad faces make it all worth while 😅

[@TURBOTRISTO]

That’s great news

[@lisatruong4684]

Roses are red Our ek is blue I need new suspensions because I'm on my menstruation

[@DAOTrademark]

What the actual...

[@TURBOTRISTO]

Hahaha winner

[@lisatruong4684]

@@TURBOTRISTO Hahahha fkn oath

[@lisatruong4684]

@@DAOTrademark What's wrong mate :)

[@DAOTrademark]

@@lisatruong4684 That's a bit ummm questionable.

[@wilberlee9696]

Notifications for Tristan must have been going offf last night 😂😂😂

[@TURBOTRISTO]

Big time bro

[@DAOTrademark]

You ain't wrong.

[@DAOTrademark]

*ADD ON TO MY ORIGINAL COMMENT BECAUSE REPLIES MAXED OUT* *I REALLY NEED THESE CAUSE I'M ON MISMATCH SPRINGS AHAHAHAHA, MY LEFT IS LEANING LOWER THAN MY RIGHT SIDE*

[@daniellee9385]

They took comments as spam gg being deleted

[@DAOTrademark]

GG

[@DAOTrademark]

Amber

[@daniellee9385]

able

[@daniellee9385]

@@DAOTrademark bro it glitched

[@lacyfins9627]

I wonder how the "Rev9 Hyper street II" coilover I just got would fare on the test? If I went by price they'd definitely be in the top 3

[@TURBOTRISTO]

Ok nice I haven’t seen any one running these in australia, I wilould have to get a set to test

[@originalshadow93]

Great tests. Unbiased facts >

[@TURBOTRISTO]

Thanks for watching

[@AdrianLopez-gp9yz]

Hey just wanted to ask when you have the chance please if you think maxspeedrods are good for lowering the car to daily driving and will be good to ride on i dont want to drive and have my springs come off😅 I have a 05 acura tsx thank you!

[@TURBOTRISTO]

Yeah they sure are they can handle the punishment. You just need to make sure they don’t have any leaks when they arrive the quality checks aren’t the best, if they leak send them back they will replace them no charge , if they come with no leaks they will last you years no problem

[@dennisrobinson8008]

Do the shockworks and cusco smoothen out the ride with stiffer springs? What does it feel like to the driver in comparison?

[@TURBOTRISTO]

I can only speak for the shockworks because after the video we wen on a drive and they were amazing absolutely perfect

[@dennisrobinson8008]

@@TURBOTRISTO So a BC or Maxpeedingrod with that same spring rate will feel harsher in comparison to the shcokworks?

[@TURBOTRISTO]

it would depend what that spring rate is, i would recommend emailing shockworks

[@dennisrobinson8008]

@@TURBOTRISTO Like an 8k or 10k spring rate. On BC and Maxxies it will be harsh over bumps. I wasn't sure if a higher quality shock or strut could smooth that out, where we have ground contact at all times but not as much harshness transmitted into the chassis. So we'd have the advantages of the higher spring rate and more smoothness? I guess the only way to know is run both with the same spring rates.

[@TURBOTRISTO]

it all depends on your application what spring rate you need

[@tomgoddy4467]

Great information... thank you 👍👍💯

[@TURBOTRISTO]

You are welcome please share and consider subscribing