Do This If You Own An ARIENS Snowblower! MUST WATCH!

Do This If You Own An ARIENS Snowblower! MUST WATCH!
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a coffee!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
I have easy to follow and thorough step by step tutorials "do it yourself" (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed whacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZbin and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZbin to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #ariens #snowblower

[@donyboy73]

Watch my video "ARIENS Snowblower & Engine Controls Explained!" here; kzbin.info/www/bejne/in3bqZSNg6ubrdU

[@rapaent]

Thank you Dony! I'm currently looking at Ariens. I currently have a Cub Cadet 3x 30" which has been great for the past 6 years that I use at my cabin. It handles 18" snow without any problems. Now, I need snowblower for my home which half has an all cement driveway. 100' is double that turns into an additional 75' triple wide all cement driveway (175' in all). Usually, there's no more snow than 12" to 14" at the most each season. With that being said, I feel I don't need what I have at the cabin. I am however, looking for a well built 2 stage SB with decent engine that would handle the snow without bogging down and blow at a great distance. I have a couple questions if I may; Do you have any recommendations in which Ariens model would be a great choice? Also, what's your thoughts in build between CC and Ariens? Meaning, what would be your first choice? I love all your video's and have seen how experienced you are..... You're the best person I know that I could trust in getting an honest answer. I would sincerely appreciate it. Thanks again! 👍😊

[@donyboy73]

@@rapaent I would buy the Ariens SHO model, it has a bigger engine and better features. Get at least the 300cc or bigger engine

[@rapaent]

@@donyboy73 Thank you Dony!! I will definitely look at the Ariens SHO models with the 300cc or bigger. I sincerely appreciate your input in pointing me in the right direction. Love all your repair videos!! Thanks again! 👍😊

[@motorcoachtech7615]

Good info! There is a 100% chance anti-seize is going to get on your hands and clothes! Thanks for posting.

[@TheOtherBill]

In my experience it's more like 110% 😆

[@billk5727]

Some may even end up on the Moon

[@barrypettit3668]

Another good video. I have this exact Ariens ( one year old )and have greased and anti seized it up per your videos. I am glad you showed how you used both grease and anti seize on the inner shaft.I really like my Ariens but they could do a better job with corrosion protection on the shafts before leaving the factory.

[@edwintaber6465]

Things to check if your machine is pulling to one side: Make sure the shoes are adjusted evenly; If you have a machine with removable pins in the wheel hubs for easy turning - put the pin in to go straight; check the air pressure in the tires - the tires have heavy sidewalls and look like they have air when they don't; both tires need the same circumference to go in a straight line - two different make and style tires are suspect; more wear on one tire; you just replaced one tire that was bad. Measure the circumference with a cloth tape or a piece of rope

[@kensmith6708]

I've been using Lucas red and tachy grease for years and have never had any rust or seized parts. I don't care for antiseize way to messy, and it doesn't stop rust from forming. Grease is easier to clean off and reapply, I do maintenance on my equipment religiously. I've never had rust build up or anything has ever seized up on my snowblower. Great video, Don, but I feel grease is better for water and snow applications.

[@percyfaith11]

I've had the same experience with anti-seize. After a season the axle shaft was dry and rusty.

[@kensmith6708]

@percyfaith11 he always pushes that antiseize and never comments on a post that doesn't agree with him and or praise him. I watch his videos because he has useful information that he shares.

[@kec2528]

So just grease and no anti seize? What grease do you recommend? Thanskt

[@kensmith6708]

I use Lucas red and tachy grease it holds up to water.

[@percyfaith11]

@@kensmith6708 same here

[@Wrang15]

Wow my sts 24 has grease fittings on the shaft... lug nuts hold the tire on. It has a hub like a car with a nut and cotter pin under the dust cover. Seams like newer models have cut corners to save cost.

[@ericclark8258]

Ive greased my Ariens 1027 LE axles and grease sprockets..chains and clean friction disc. every year and after 8yrs it has never let me down. thanks Donny great advice. Cheers Eric 💈

[@vernonbruce3722]

I live in Florida, so I never have and never will own a snowblower. But these concepts can be applied to many different applications. Thank you for sharing this video. May God bless you.

[@florence3146]

i just talk to a technical adviser to prolab he told me that gs 1000 greasse is a multi grade greasse so its a grade 1 and grade 2 grease, grade 1 is low temp greasse very happy i use prolab gs 1000 for many year

[@bobmcl2406]

A snowblower with a differential?!? Well, I learned something today. And your preventive maintenance tips are a huge bonus. Thanks again Dony!

[@donyboy73]

Right on!

[@capohd28]

There's a reason why Ariens are top notch snowblowers. I have a 2009 Platinum 30, has differential as well, Still runs and looks like a new machine. Lots of maintenance points and adjustments though. I keep the manual handy every year when I do maintenance on it. Looks after a 300ft driveway in a snow zone without issue for 14 years now.

[@craigerickson1910]

@@capohd28 Totally agree about how Ariens are great machines. I bought my 724 Sno-Thro new in 1972 for $350. I live in western NY where we average 100" snow/year. My machine has never let me down and many times I've helped neighbors with Hondas, Toros, Craftsman and others to clear the packed snow at the foot of driveway where the plows pack it in. Their machines just are not up to the job. My Ariens greatest moment was cutting through a 7 foot deep snowdrift after a major blizzard. I had a friend standing on top of the drift using a shovel to slice the snow down onto the ground so I could blast it away with the Ariens. I've done a fair bit of maintenance over the years including replacing drive axle bushings and auger bushings. I'm still on the original friction disc and can't understand why so many people seem to need to replace them. I suspect they have the pressure against the disc adjusted too high? I've also disassembled the carb and cleaned and installed new needle and seat. I've done a bit of welding to repair the sheet metal teeth for rotating the chute. The metal behind the teeth had cracked. I don't think any of these repairs are unusual for a 51 year old machine that's seen lots of duty. I have never sheared a bolt on the auger shaft, knock on wood.

[@capohd28]

@Craig Erickson I enjoyed reading your post. I have replaced the friction disc and one cable. That's it. Everything else is original. The cable was fine but the boot cracked and it let water in and would freeze up. I am surprised you are still on the original disc! That is the main wear part.

[@FuvNtsimKhaab]

I wouldn't call it a differential as a differential allows difference in speed for left and right wheels. I'd call it the driven gear. You can see the smaller drive gear that it connects to.

[@bratttt100]

Great video, thank you. My Ariens is one year old. I followed your instructions and sure enough the driveshaft was all rust. I was able to remove it, clean it up and apply anti-seize and lube as you instructed. THANK YOU for getting this important video out.

[@shsechas]

Put some anti seize on my Ariens years ago when you had a video about it. Glad I did it. Thanks!!!

[@donyboy73]

Good stuff!

[@Uticagreens]

Excellent advice! It amazes me that anti-seize reaches to get to everything. Just like taxes!

[@robertdelorme8779]

Wish I had known this in 2011. The first year after one winter of use I went to take the wheels off and no way was one of them coming off. So far no issues but that axel is going to get cut if ever there is a problem. I'm a maintenance guy but somehow I missed this one.

[@jamie6011]

You have touched on something many overlook! You're an amazing asset to many out there!

[@bluesriderDF]

Well, this explains why my wheels would freeze up & not turn after I used the machine and it sat overnight in my freezing shed!! I even asked Ariens about it and the guy I talked to had no idea! THANK YOU!!

[@ecttreker9816]

Thanks for this tip. I just checked my deluxe 28 (in service since Nov. 2018) Have always done my own maintenance but was unaware of this shaft over shaft feature. Just checked mine and happy to say I caught it just in time as the main shaft had a decent coating of rust. All cleaned and lubed properly now. Took maybe 1/2 an hour. Enjoy all your videos👍👍

[@donyboy73]

good job! you just saved yourself hundreds of dollars!

[@williamb3323]

is it safe to tip the snowblower on to the chute to get to the wheels with oil in the engine? or should you drain the oil first?

[@margoscargo]

@@williamb3323 It's advisable to siphon the fuel out of the tank first. A workaround is to place a a plastic bag over top of the the fuel tank opening and then screw on the gas cap if your tank is full but it doesn't always work. Your oil should be fine as long as the cap is screwed on securely.

[@bungalowfeuhler1541]

I use basic motor oil with the antiseize. As I reassemble, I spin everything around to distribute it. Been doing it for about fifteen years now and I’ve had units come back year after year, allowing me to inspect the long term effect. It’s amazing how well it preserves the differential and stops that awful rust-dust in its tracks. No more flattened out splined shafts.

[@100vg]

Wow! Seems like that should have been done at the factory during assembly with a note in the Manual of how to maintain it. Now I have to wonder if this kind of thing is even covered in the Manual. Most likely a Maintenance/Service/Repair Manual, if you can find one, but it should also be in the Owner's/User's Manual. Great stuff, Don!

[@philherrick7319]

This would never be in the owners manual. The manufacturer, in this case Ariens, suggests maintenance/ repairs be performed by an ariens dealer

[@100vg]

@@philherrick7319 Yes, but if you search the Internet, you can sometimes find the Shop Repair Manual that the dealer and authorized repair shop techs use, and sometimes you have to call Customer Service to buy it. Sometimes, the title goes by a different name, so instead of "Shop," look for Ariens, OEM, etc., and instead of "Repair," look for Service, Maintenance, etc. I'm not saying that Ariens has either way, online or Customer Service, but it wouldn't hurt to do the search or call if it's not online. I found Shop Repair Manual for a Briggs and Stratton engine on my Craftsman tractor mower online with numbered parts to reference a Part Number in a Table and it also had Torque specs, gaps for spark plug, valve stems, etc., everything I needed The manual for the mower is out of print so I couldn't buy it and I could not find it online, but also sometimes, Archive Services online will have them to download for free. Again, it wouldn't hurt to search of call. That's what I meant by "Maintenance/Service/Repair Manual." Good luck!

[@philherrick7319]

2 different things Owners, /users manual is NOT a service/repair manual That's why I commented that the information you refer to would never be found in an owners manual

[@iowawrench]

Just for fun, you should take a picture of your camera. I bet it's anti seize silver:) Seems like all I have to do is put one dab of anti seize on something and everything I touch after that somehow turns silver:) Always appreciate and enjoy your videos and thanks for sharing your expertise.

[@jakeschisler7525]

Most manufacturers don't want you to know this so that we can spend more money to fix it down the road.

[@KensSmallEngineRepair]

Great info Don! I also check the pressure on the drive disc and set it correctly. The kids assembling snow throwers at Home Depot and Lowes down here put Wayyyy too much pressure on the rubber drive disc and it wears out the first season! Also don’t shift these “on the fly” as the discs will wear out prematurely!

[@donyboy73]

exactly!

[@makipa20021]

I will definitely do this in the summer because now is too cold. I have the Ariens 28 inch and is awesome $1200 from Home Depot 3 years ago 😊

[@steph14292]

My Ariens is 15 years old. I live in an environment where we get 10-12 feet of snow per year, temps as low as -25C. My machine has started and run every winter day. Never touched anything save for oil changes and occasional sheer bolt.

[@TecumsehRulesbcserk]

For those who don’t know, Toro snowblowers come from the factory equipped with grease and anti seize on their axles. So if you have a newly purchased Toro, then don’t worry about it.

[@jackg7225]

Thanks, good to know not to worry about my toro

[@l337pwnage]

That's just because Toro knows they'll see the machine back under warranty. 😛

[@paulserafin6730]

@@l337pwnage

[@jeanvaljohn3921]

If there were humans involved in the assembly, you should add, 93% to 98% of the time.

[@frankie7508]

Smart, practical, Experienced, Is knowledgeable, Generous, And highly informative giving all the necessary details to do the job right! Donnie boy is simply one of the very best. Great job and thanks again, Keep up the great work!!!👍👍👍

[@brianbanks3044]

yup, take the time now and you won't be cursing out Ariens in a few yrs if you have to remove a wheel...too bad they didn't do this at the factory...could save a ton of headaches for both mechanics and homeowners down the road

[@donnovicki9771]

Today is Nov 16th 2023. We are supposed to get Lake Effect snow here in Erie Pa..I doubt I will have time to do this now, but for next summer it will be at the top of the list. Thanks for this tutorial.

[@jackg7225]

I have an Ariens and it’s pretty old. It would get warm and stop running before I got done with sidewalk and driveway. A couple of years ago I took off the covers and gave it a good cleaning and changed the oil. We had 3 feet of snow one day that season, after clearing the walks and driveway, my son and I cut a car width path down the middle of the street for 5 houses along with my new toro the ariens ran like a champ and never overheated.

[@juveraposo3169]

cleaning. as in "cleaned the carburetor" ??

[@crazzywolfie]

you should not use anti seize on the inner shaft or the splines that go into the differential. you are going to cause accelerated wear on those parts by doing so since they are constantly moving.

[@raf8677]

Thank you so much Donny! I just attacked my seven year old Arians. I got it just in time because the outer shaft was almost glued to the inner, they were very difficult to separate. You're the best!!!

[@Cacheola]

Anti-seize is for fasteners, it's not needed and just messy af. There are some good marine and anti corrosion waterproof greases that will work just fine on their own. Thank's for the tip, I just picked up one of these beasts today, practically brand new for half price

[@1McMurdoSilver]

Your demonstration on why it is important to wear disposal gloves is spot on. I would have never thought about that. Is this the first time you lubricated the wheels?

[@spinjector]

Wow. Thank you. I just bought one of these with the locker last year. But it's the one with the bulldozer tracks. Spent $2200 on it. I'll be doing this grease job asap. Again, thanks.

[@TimTesch]

Please note that many have found a golden colored bolt in the transmission compartment. This bolt holds the flywheels secure. You can manipulate it into place from above into the center of the top flywheel with your fingers. Screw In as far as possible using your fingers and an open wrench. Tighten with a box wrench. Tap tight with hammer to box wrench.

[@donyboy73]

That is usually the bolt for the auger pulley.

[@johnasumaa8644]

Your videos are well-filmed, interesting, and have saved me many, many dollars. Thanks.

[@jse6733]

Donny, great video! I have been instructing my customers to do that very same thing for many years now. It’s a shame Ariens cut’s corners like that, where as Toro has the very same Auto-Turn diff now as well and they come lubricated from the factory! My only criticism of the video is, I find ant-seize ends up getting to thick and sticky for snowblowers, that’s why I only use lubriplate low temp grease and fluid film exclusively. Keep up the good work Donny!!

[@Jaw-t3t]

This is a great video. I can tell ftom your comment you know what you're talking about. Can you suggest a quality low temperature grease? Appreciate it.

[@dreamerrt216]

​@@Jaw-t3tit's in his comment, lubriplate low temp grease. Lubriplate IS the brand.

[@Jaw-t3t]

@@dreamerrt216 shoot. I missed that. Thanks.

[@dreamerrt216]

@@Jaw-t3t No problem. 👍

[@craigmorgridge4117]

Great video! I have a 6 year old Airens and never did this. Had a hard just pushing it and it would (ratchet) gears wear in drive mode. I took it apart and it was seized up, all cleaned up and lubed. Works great now and can push it now without the resistance.

[@robertsjw11]

I don’t have a snowblower but watched anyway as you always provide great information.

[@chrisheffernan6600]

I also remove the shear bolts, and squirt transmission oil between the shafts, then reinstall the shear bolts after thoroughly lubricated.

[@henrymurawskibigdogrepair]

I did this video last year and I found out how good the shafts where after one year

[@CTSCAPER]

I was working on my snowblower last week and removed the wheels and I couldn't figure out why only one side of the shaft had an e-clip on it. Now I know! Thanks for sharing Donny. I hope I didn't watch this video too late.

[@gregoryking9348]

I have an old machine that I can't get the right side wheel off. I soaked it with a variety of products, heated the shnizits out of the hub, and popped veins in my neck yanking on it. I saw a tuber who drilled 2 holes in the wheel on each side of the hub and used threaded rods and nuts and washers to make a puller (more of a press actually) but I haven't resorted to that yet. I should have though because that tubeless tire went flat and no amount of getting at the bead and cleaning it up would make it hold air so I had to put in a tube. Big fun. And yeah...one drop of anti seize is enough to smear halfway across the US. 🤣

[@bobmcl2406]

Been there, done that, brother. You have my sympathy. I had one where even a 20 ton bottle jack wouldn't budge it. I wound up changing the tire with the wheel still on the machine. Not fun!

[@edwintaber6465]

If your machine gets a lot of salt exposure - that may need lubricants that are not just low temperature. It would be interesting to get some lube rep input on that. Would a marine grease suitable for salt water be better ???? Long ago when I was a marine mechanic I experienced some grease turning hard on our deck machinery.

[@juveraposo3169]

we need "project Farm to do an test on that !!!!

[@orestwitiw213]

Last spring I serviced my 2 year old Ariens 28 SHO and I thought I did a good job. Then I happened to watch this video and I was angry. Nowhere in the owners manual did it say to remove the outer splined shaft to lubricate the shaft it rotated on! This weekend I finally serviced the unit and I was so angry to see that the shaft had rusted and it took some time to sand the rust off and smooth the shaft! Thanks to your video I caught it almost in time! I do have a question about a missing E-clip some posters mentioned. I thought one had fallen off and I replaced it. I just don’t remember what side and should I remove it. Great video as always and saving us homeowners money on service that we can do ourselves after following the steps on your videos! Merci from SS Marie!

[@dandahermitseals5582]

Very kool. I have a Simplistic SnowAway 10 80 CM. I wonder if it is the same as this?? I don't think so. I'm 80 yrs old and no way strong enough to lift this heavy machine up into that posture. Dandahermit

[@fairgolfer]

Hi Don. You would have laughed if you saw me today with my smartphone perched on the snow blower while I tried to remember if you said grease and anti-seize, or just grease or? all while tapping the screen with a clean knuckle. Thanks for all these videos you do. 👍👍

[@mikewurlitzer5217]

This may be the reason my 2 y/o Ariens blower was constantly pulling hard left the last time I used it. Thanks.

[@raymondfrato367]

Once that shaft rusts, no amount of heat or penetrating fluid is going to allow that to come apart. I have had to junk sa few Ariens snowblower because the customer didn't know this.

[@larryfine4498]

When those wheels sieze on the axle, near impossible to remove without damaging the axle. Good video.

[@donyboy73]

exactly!

[@deangulberry1876]

I’m new to maintenance. What I’m learning is everything needs to be covered in grease all the time!😅

[@craigsmithx]

It was recommended I watch your videos by facebook group, Small Engine Repair & Discussion. I'm in the market for a new snow blower.

[@BillMetter]

Thanks Donny, I have a brand new (never used, still waiting for snow in Massachusetts) Ariens Platinum. I just watched this video and did everything you recommended. I’m glad I did, I was surprised at the minimum grease that was on this new machine. I was thinking about greasing the auger too.

[@tubular26]

I just bought an Ariens Model 920025 in November. So I took your advice, bought some anti seize and grease. Just a note: this model does not have an inner sleeve, clip or “key” on the shaft. I applied it nonetheless. I’m sure it can’t hurt.

[@mitchfountain6523]

Great video and I have exactly that problem now with my ten-year-old 520. Flat tire, went to pull a wheel ... absolutely welded onto the shaft. "Slime" got me going again (before resorting to filling it with foam) but a lesson learned.

[@jeeperp3926]

A well greased shaft and bush…ing always makes life better!

[@diverdave4056]

and make SURE the tire pressure is correct !

[@larrysoreto3311]

I cannot wait for my outer shafts to lock up. The amount of time I spend wrestling with my machine to get it to track straight is 100%. Can you post a video on how to turn this machine into locked differential?

[@stoneyswolf]

I got my ariens over 25 years ago new never had any issues with the axles or the differential. I replaced the scraper blade once and the shoes that ride on the ground.

[@doug2078]

My Ariens will be 30 years old this winter. And Ive never done anything he did !! lol

[@Robert-yp9zs]

I'll have to check the exploded parts view of my 1969 Ariens 4HP snowthrower to see if your method also works. Having never had the wheels off, it should be "interesting." (The tire tread is almost gone, so there is an inducement to replace the wheels.)

[@bigredjohnson6921]

Great to see a mechanic that's not afraid to get his hands dirty, no woosie gloves!!

[@percyfaith11]

Fools always think it's cool to be stupid.

[@pjdambra]

This video answered my question of why my machine is so hard to maneuver.. I didn’t know it had a differential. I thought it was just a solid direct drive. Do both sides have the differential? Or just the one shown in the vide? Thanks for the info.

[@marathoner43]

Thanks for this video Don. I have a 2017 Ariens, and I just did this on mine. It was pretty bad, but was able to fix it. Now that I know, I will be checking this every year.

[@wandamarc]

Great video. My 18 month 24 inch Deluxe which was just used for one mild winter (so maybe 10 times) and the rust was so bad I almost could not take the wheel off already! Cleaned everything and used Fluid Film brush on and will make this part of my routine.

[@wskripka1]

Anti sieze vs grease ? Wont grease alone keep the shafts from seizing? If you mix grease and and sieze you dont have good grease lubrication any more ????? Just curious ! Thanks

[@jeremycarlson376]

Thanks for this! Two seasons ago I picked up a brand new Ariens platinum SHO, always looking for ways to keep it in tip top shape.

[@carlmiller1034]

Excellent video Don!!! A little bit of TLC now will pay off HUGE down the road. Thanks for sharing!

[@donyboy73]

You bet!

[@bobl997]

Thanks for this video. I own a 2013 Platinum and had never done this service. I was able to do all you showed, but since after 10 years, there was no seizing, I just used Lucas Red & Tacky grease which does claim to have some anti-seize properties. The inner shaft with the splines was also crappy but buffed out nice. Used that grease everywhere including the zirk fitting behind the wheel and the auger zirk. I am pretty sure if I do this every year, shouldnt have a seizing issue. I could see wear on the splines also, maybe time to replace it. The auto-turn works MUCH smoother now.

[@eddale5557]

I can't se all this is nessesary if you can drive the blower for 10 years without any issues?

[@bobl997]

@@eddale5557 I could feel a difference in its forward rolling, seemed smoother and the auto-turn took much less muscle.

[@dewarner12]

I am just in the process of buying a Deluxe 28 SHO Ariens, and found this video really helpful. Thanks -.

[@charlessantiago4700]

Hey Donnie great video, your videos are a must watch! I have an Ariens 1028 snowblower that I bought in 2000. Thanks for all the info, I hope to keep this machine running for another 20yrs!

[@MrRandolph52]

Great info. Ironically, I bought a Ariens Deluxe 28 less than a year ago and your info on how to perform this was spot on. Previously I had thought one of the "E" clips was missing until I downloaded the list of parts that made up this blower.

[@perspicator5779]

Fantastic! didn't even know there was a diff. Hope I can service my old freebee gift from my neighbor. Machine runs like a new one but have to check that shaft.

[@leonportelance9613]

Another great, no BS tutorial. 'Merci docteur!' ...another one to my to do list.

[@donyboy73]

Vous etes bienvenue!

[@steveperry1344]

i hit anything that moves and i can get at with spray lube each year. i can't get mine to start from cold now because it seems to floodso i pull the w/o the plug and spray starting fluid right into the cylinder and then it starts right up and runs good other wise it floods. it will start fine when warm. the thing is 40+ year old ariens 6/28.

[@harrygrimley4352]

Very interesting. Great tips. Thanks for sharing this with us.

[@Farmer-bh3cg]

I'm late to this video. Nonetheless thank you for pointing out the differential shaft maintenance. I never knew it was there. I've religiously attended to greasing the axles at the end of each season but will now add the differential shaft to my maintenance schedule. Thank you again!

[@mattmc2681]

Is it a similar procedure for a RapidTrak model? Thanks for the video!

[@bobnelson2828]

DO THIS!! The inner shaft on my 2015 Deluxe 28 was VERY rusty. I had to yank numerous times to get the outer shaft off. I was shocked. Blower sits in a heated garage.

[@joescott701]

Bought a used 2019 model. Could barely remove the tires. That outer axle part would not move an inch. I deliver steel to 3 plants in Brillion WI. Those axle parts come from my employer. They are well oiled and ariens won't accept rusty steel. They should apply grease upon assembly.

[@b.c.junctionembroiderynj8804]

Thanks DONY ,! Another weekend project , we only had one season to use the beast, its 4 years old now..... so I'l lube everything up . thanks again.

[@stevenlefebvre2991]

Thank you for the great advice I have one of the new design snow blowers and I am going to grease it just like you said thank you very much.

[@cardo1111]

As always excellent tip/advice. I didn't realize that there even was an inner axle 👍🏽

[@Wyn61]

Thanks Dony!! My Ariens ST24LE/ 8hp 24" cut is in its 2nd winter here in Fargo. I have this "split" Transmission too. I've gotta do this!!!

[@Skoot61]

- Donyboy73, would this axle service be recommended even on Arians snow blowers equipped with 'Rapid-Track' as well?

[@taze27]

Thanks again Don! I'll try this on my Yard Machines before the next storm rolls in. God bless!

[@coolbluelights]

My snow blower is going to seize up from non use this year with this snowless January we're having.

[@KSMike1]

Would a good synthetic grease on everything be just as good as anti seize on some of the parts?

[@donaldmatthies6026]

Don, Another informative video! Thank you for taking time to film, edit and post this video

[@beri232]

Helpful video…. My Ariens is 14 years old and I have never done this.

[@nicholassmerk]

The snow blowers with diff locks don't drive straight in deep snow drifts. I'd rather fight one with a solid locked axle. Be careful mixing greases, some don't get along. Look at a compatibility chart before mixing.

[@scottmcarthur2976]

Excellent info and a great video! Thanks for the preventive maintenance! I would never had thought of this pre - Venntive-maintenance. So much to learn on u-tube! Thanks!

[@user-yz4gb1xn3h]

Thank you for the great video and the information which i will use because i just bought a brand new ariens snow blower.

[@Subie-Driver]

You should do this with any make of snowblower with wheels like this. I do this with our 16 year old craftsman every fall…and lube the drive bits inside the bottom.

[@MRNOBODY023]

drill a hole through the 2 shafts and add a grease fitting on the wheel shaft,

[@TheCrittercam001]

Great advice and tutorial from one of the best in the game! Thank you Don!

[@EricSimkins-lo7kj]

THANK YOU...MINE IS A YEAR OLD AND I WILL DO THIS TO MY MACHINE.

[@bsugarman1]

Thanks for this video and instruction - excellent. Question - what about the other wheel. Can I pull that wheel and axle without messing up the connection to the differential? Btw - I love that auto turn. Platinum 24 and Vermont winters!

[@peterkramer9232]

That is what makes your unit turn better

[@jenn36]

Great video! Very informative and detailed instructions. I have a deluxe 28 bought about 8 years ago, the reverse gear has stopped working for years. Are you able to do a video for how to fix it?