Definitely clean EGR VALVE. TOYOYA diesel. Fourby4diesel. TOYOTA PRADO HILUX 1kd-ftv EGR clean. Blocked up intake on Diesel. How to clean intake.
Пікірлер: 23
@Kitty-vw5yi21 күн бұрын
Never watched you and this came up on my history part
@TheMaggot12123 жыл бұрын
The best possible way to prevent this is to delete the EGR, this will have a massive improvement on engine life, fuel economy and particulate output!
@4wdoffroadpassion3 жыл бұрын
Once again you’ve managed to put out some great simple information for the masses. Also loving the clean fingers, badabing badaboom haha
@martinlang96153 жыл бұрын
Good camera work, given what u got to try and show us. Excellent explanations as always.
@THRASHED053 жыл бұрын
Love your work mate great vids
@i.norman Жыл бұрын
Thanks and helpful !!
@lukekilah62573 жыл бұрын
Add water methanol injection, once intake manifold is removed properly cleaned. You’ll have a chemically cooled and cleaned engine. Personally, I’ve got a single 32cc ( smallest available) nozzle set up from prometh in the states. Entire intake manifold is still looking brand new after 100k. 70/30 water, methanol. Mix.
@maryjanebuscato19353 жыл бұрын
hi boss,if that manifold as dirty as that what will be the performance of ur car? what's the function of the manifold in an engine?sorry i ask u this coz i'm not familiar of an engine.
@johnglenn29893 жыл бұрын
I cleaned my intake egr and throttle. But the thing is my car isn't running the way it use to. What do you think happened.
@christhomas42603 жыл бұрын
What is the risk to the engine if this work isn't done at all. Are there signs to look for or listen too to know your engine has a build up of carbon
@snells-window3 жыл бұрын
Kms and driving conditions for this vehicle?
@zutapi2 ай бұрын
If you scratch off some of that soot in the Manifold... how do you get it out? Vacuum cleaner?
@enggwahaj3 жыл бұрын
Would it be possible to make a video on "The Inside view of intake manifold" using a borescope or inspection camera?
@Fourby4Diesel3 жыл бұрын
No need to they can look OK or terrible much like what you see there
@Kiwigd3 жыл бұрын
How are the 1kzte engines for sooting up? I’ve got 200k on mine and have been wondering if it’s time to investigate..
@davecurry83003 жыл бұрын
Changing my glow plugs now at 225,000 kms. 2004 model. Just took throttle body off. Wow, a lot cleaner than in these videos, inlet manifold a little bit more dirtier just like in this video. Cleaned it out, looks great. Typing this whilst video on with his inspection camera. Will do this in a minute on mine. My 2 cents worth. Good luck with yours. Back to work on mine now !
@moisty2543 жыл бұрын
I just removed my swirl flaps on 4jj1 d-max (screws are known to come loose and get sucked into intake valves/piston etc) after 73k km. The soot was about 3mm thick on the sides. Get those egrs switched the hell off boys!! Also get a catch can as PCV is pretty disgusting too.
@Linkmyssing2 жыл бұрын
How do we feel about fuel additives for cleaning? Does it work or am I wasting my time? Ford courier 2.5L
@Knowbody422 жыл бұрын
Yes
@tylasloan6763 жыл бұрын
What the best way to get as much of the carbon out of the manifold without taking it off, best method
@Fourby4Diesel3 жыл бұрын
You have to take it off
@Mistabushi2 ай бұрын
@@Fourby4Dieselold comments and video but facing simolar scenario, there’s no separated intake manifold on my ford duratorq diesel and while I cleaned everything I could I suspect there’s still plenty of crap inside, hoping water/meth with small valve will slowly clean it up. Stage 4 for sure