Do You Need Tool Truck Screwdrivers????

Amazon Affiliate link below
www.amazon.com/shop/influence...
www.milwaukeetool.com/
#flatratemaster
Instagram
/ flatratemaster
[e-mail]

[@Dansyoung]

Do you need expensive screwdrivers? No, but technically you don’t NEED an expensive tool box, or half the things we have - they just make life easier and more enjoyable...

[@Dansyoung]

Also the wera Torx screwdrivers are pretty top notch, they will hold the fastener in the head (due to such a tight fitment) which comes in handy.

[@adama5392]

The Wera ratcheting screwdriver is amazing I threw my Snap On to my buddy and have never looked back. Its pop top is so much easier and quicker and the bits hold everything and never wear out... Some gr8 tools. I love my Wera ratchets and chiseldriver screwdriver set also. take a kicken and keep on ticken...

[@theever1287]

Great video. Please keep preaching the true. You should have mentioned the waste of money NUT Drivers.

[@Cbsaiyan]

Lmfao! I was just looking at my old worn out screwdriver sets and when you said to hold a rotor I lost it hahahahah that's all I seem to use them for hahaha

[@drengskap]

That's a realistic assessment. I've got to admit, I do like the Snap-On Instinct handles, but not enough to buy a whole set of them. If I was a pro mechanic using them all day every day, I might just do that. And the Vessel JIS screwdrivers are very nice - anyone who works on a lot of Japanese stuff, whether it's cars, motorbikes or bicycle components, is going to appreciate them.

[@HardKnocksForge]

I’ve used the old black and gold craftsman professional for almost two decades. I don’t use them for pry bars anymore, since I have proper sized pry bars now and they’ve lasted forever. I have hundreds of screwdrivers. Vessel makes excellent impact screwdrivers, they also made the craftsman ones in regular flat head and #2 Phillips. I have the really long cabinet screwdrivers from snap on, but I bought them used. If I hadn’t bought them used I’d still have HFT extra long screwdrivers...

[@blakerblaker2550]

I am in the powersports industry, and we still see a lot of Phillips head screws and bolts that require quite a bit of torque to break loose. So, in my industry they are a NEED. Snap On and Matco screw drivers grip screws and bolts much better than a low quality screwdriver.

[@whatfreedom7]

Anyone working on any Japanese stuff needs a JIS screwdriver and it will work better and last longer and will have a lot less damaged screws. The tool trucks don’t even sell these.

[@BySixa]

I was literally just about to comment about the vessel screwdriver and then you brought it up. It's excellent!

[@montevallomustang]

I have the snap on screwdrivers because I don't like the thought of all my high end premium tools having to share a drawer with something from home depot 😁

[@KobaBlack113]

Me too.

[@flatratemaster]

I said you didn't need them, guess I was wrong:)

[@88FCRX7]

Haha that's me but with anything offshore made except Japanese or German made tools they get the same treatment and privlage as my US made tools Chinese and Taiwanese made tools get the 3rd class treatment they get passed around like a village bicycle everyone gets a ride

[@harveyadams5453]

I heard that

[@christopherkassner8894]

Very sound advice. 100% agree with the Phillips impact screw driver. That’s my go to when I need a Phillips. They seem to grip the screw better.

[@ecwurban]

I personally love the snapon screwdrivers. I'll use them on some air cleaners. Especially the chevy 5.3's that use the #3 phillips. The lower screws can be annoying to get to with a gun. My snapon rep comes by very often and I absue them. BUT... I only bought the #2 phillips off him. Every single other one I've found at a pawn shop for super cheap. :D

[@deejaywon]

Good advice, thank you!

[@megadethguym7977]

The thing about tool sets that always gets me is they sale you alot of stuff in sets you will never use from my experience

[@austinramer1508]

I love my Matco screwdriver set. Paid like crazy for them but definitely good value and use them a lot.

[@garyharms276]

I have a set of Mac drivers that are at least 20 years old , still haven't worn them out , cause they never come out of my box , I also love the vessel it's a Honda necessity

[@NRecob]

Wholeheartedly agree with you about Vessel JIS screwdrivers!

[@fisherofmenmatt4194]

Yes for aircraft mechanics, a Phillips screw that is combined with a self-locking future that hasn’t been touched in years can be a pain haha.

[@zr2trackerjoe]

I enjoy watching your videos as it is so vastly different from industry to industry. Working as an industrial mechanic I got some snap on screwdrivers and don't regret it at all. They have fit better and don't seem to wear out like store brands and when they do the snappy man comes to the plant.

[@themountofoliveschannelwit7009]

As an Electrician (26 years), I have never used a "Tool Truck" brand such as Snap On, SK, Cornwell, MAC Tools, or MATCO screw driver in my life but I can attest that the 100% made in U.S.A. screw driver made by Klein Tools is hands down the very best industrial grade screw driver out there. I would estimate that 90% of electricians, cable technicians, HVAC guys and plumbers all use Klein screw drivers. Made with high grade U.S. Steel and perfect mechine heads, they fit electrical terminal screws perfect. Whereas brands like Kobalt, Craftsman, Irwin, DeWalt and Milwaukee have fatter tips that don't fit electrical terminals as good. ((((maybe Electrician's tools vs Mechanic's tools might make a good video. Kinda like "Who has better tools? Your Auto Mechanic or your Electrician" ...that could make for an interesting video since several of the tools are the same ( that might end up being a Snap On vs Klein video)

[@vincescalise4821]

you always make very valid points, thankyou FRM

[@mikeeustice4452]

So true flat rate master I have all the sets of the new mac line and the only reason is for getting various snap rings out of transmissions during overhauls plus the colors are correct red and black 😀😀

[@adriangonzalez7049]

I’ve learned that cheaper doesn’t mean less expensive. I bought several screwdriver from brands such as Pittsburgh, Craftsman, Gearwrench, Milwaukee, and Kobalt. I probably spent the same amount on those together as my snap on screwdriver set. Yes they were under warranty but the point of it is to not have to use it.

[@jaymechanic1228]

I love the snap on handles . They fit in the hand perfect. And i love the green colour.... the main thing i brought em.. there freaking cool!!

[@guy1637]

I have had brand new snap on phillips screw drivers break the tips off the screw driver on a almost new screw.Three times.Why I get craftsman screw drivers.Never have broken a tip yet.Also that impact rated phillips screw driver you have.I tried the craftsman version.I love that thing.That is my go to screw driver for most anything. Years ago a friend who is a die hard Snap on guy told me don`t waste my money on snap on screw drivers. He always bought craftsman...Keep up the great videos

[@ILYxIW]

That impacting screwdriver is pretty cool, I used to work at Honda and we all used one of those air hammer driven bit drivers that you twist with a wrench for the brake rotor screws. That seems less cumbersome though if it works well.

[@cptdavidwebb]

When I started out in 2005 I bought a set of Matco screwdrivers for $117.00. I was working at a Rolls-Royce Bentley dealer and I only use them on Interiors so as to not to get the leather and carpets dirty... they still look like brand new because I just could never bring myself to bash on a set of screwdrivers that cost that much.

[@sscollantes63]

cptdavidwebb nice! May I ask how did you get hired at a Bentley dealer? I tried applying to a couple of high end dealers but nothing. It seems I may have to start all over to learn their method of work if I do get hired being that I come from an independent shop. Any info is greatly appreciated,Thanks!

[@cptdavidwebb]

@@sscollantes63 I just walked in off the street, resume in hand and talked to the service manager, told him I would show up ON TIME, EVERYDAY and then I started at the bottom. Without a fancy diploma from an expensive School, just four classes from a community college under the Ford acert program. I probably should mention that before that, I spent 6 years in the Coast Guard as a helicopter mechanic tearing apart jet engines and gearboxes. Didn't help me much on cars, but it looks good on a resume.

[@maxw576]

IMO a quality properly fitted phillips head set is a must have for corroded or soft (cheap) screws. The ones that a screw gun or cheap drivers will strip out.

[@flatratemaster]

That is why I mentioned the Vessel :)

[@TxJonathan]

I use a Milwaukee screw gun and supplied bits and rarely ever have screws strip out. If they do it's because I thought I can get away with hitting an already stripped screw.

[@maxw576]

@@flatratemaster Picked up Vessel's P2 & P3 screwdrivers. You're right - Nice drivers. I'll put them to good use in the rust belt. Thanks for the tip!

[@andygilbert1877]

It’s well worth having a JIS 2 screwdriver if you work on Japanese cars as generally JIS screws are what they use. JIS is slightly different to Phillips. Google it if you don’t know, many don’t. Those Vessel ones are good!

[@montestu5502]

Totally agree with you on the Vessel JIS! I bought it when you recommended it last time. IT IS AWESOME. Have to admit that I didn’t even know about JIS until you brought it up. Now I know why a #2 Phillips didn’t work worth a crap on Toyotas.

[@hackerman2k]

Monte Stu Same here. Thanks FRM!

[@markcooper9599]

I bought my snap on screwdrivers 10 years ago before good cordless ones were around. Still love them

[@geologic740]

You brought up good points. The only professional screwdrivers I've used are '90s era Snap On. The handles are very comfortable but the tips start to wear out after just a few uses. The JIS is the one to own, but I can't seem to find it in magnetic bits, S wrenches, etc., only the standard handled driver is really available.

[@oldguy2082]

A good screwdriver is a must; I'm still using my Stanley Workmaster screw drivers from the '70's. You're right you don't have to purchase tool truck one's, but, a really cheap screwdriver tip can twist or damage the screw.

[@jamespn]

I spoke with tool truck sales people and their advice for a DIY person like my self is not buy a tool that you only use once or twice or doesn’t make you money. They advise borrowing specialty tools from an auto parts store or from a friend who trusts you with their tools.

[@joshlawrence4512]

In a career requiring efficiency everywhere you can save time to maximize your personal worth. Manual screwdrivers have become something of the past where cordless tools that can do the same job have taken their place. That's a really honest video for up and coming techs. Those still have a place but are quickly losing or have already lost most of that place to us... even in truck and transport work where we normally aren't working a flat rate system directly to the tech. I've been in automotive and collision shops as well... they were the first where that change quickly started happening.

[@paulbentley9026]

Yes as mine are used as pry bars, punches and chisels so life time warranty comes in a lot!

[@christopherelrod8788]

I also use my screwdrivers as line up pins lol. Holes don't line up get the screw driver and shove it through then the bolt slides through

[@davidharvey2547]

Spot on totally agree 100% although i have a set of black handle snap on screw drivers from way back when Hindsight is a wonderfull thing keep up the good work

[@ClientGraphics]

💯% agree! You don’t need to buy tool truck screw drivers. Home Depot was a decent Milwaukee Screwdriver Set (8-Piece) for $20 that would match that impact gun and then add the Milwaukee Demo Screwdriver Drivers with Steel Caps (2-Piece) for another $10. Then pick up some other store brand set that you can abuse and swap as needed. The Vessel NO.980 +2X150 and NO.980 +3X150 are a must have item for working on Japanese Motorcycles.

[@dtnel]

I have a Mac tools impact screwdriver set from my days on big trucks. Still use it for brake rotors to get the lock screw loose. I kindly put anti seize on the screw when I torque it back down snug. As far as screwdrivers well I have my Cornwell and Mac set from 25+ yrs ago and have a Snap On hi vis green set from a few years ago. The snap on set was free along with 2 heavy snap on hooded coats, 1 nice and 1 for working outside when cold so it can get dirty. I also received gloves and other discounted tools one day because my snap on dealer was broke down at his customers shop after delivering a box. Air dryer went out so I came and got the old one removed, picked up parts for him with his card of course and saved him a tow truck and repair bill that day. Yes he lost the back half of the day on his route but he saved a lot of $$$ and I got some screwdrivers I wouldn't have bought otherwise except had I seen the color prior to it. Yes I'm hooked to the hi vis green. Now flatratemaster you can use those torx bit drivers in cars. I always hand tighten after snugging up screws with a driver. Better safe than sorry is my theory and if you have someone watching over you back while doing mobile work it shows them you care about their car. It's about customer satisfaction as well. I do it with whatever screwdriver is handy that gets the job done though. I have all kinds of brands, Stanley, Masterforce, craftsman, Mac, Matco, snap on, cornwell, generic and oh did I say generic. You could save that $$$$ and get you a torque screwdriver that snap on has had out for awhile now, few months or better I'd say. There's things more torque sensitive these days anymore it seems.

[@wagstag89]

Only time I use them is on carburetor bowls and I don't even use them to break the screws loose. Usually do that with a pair of mini pliers and then back the screw out with a screw driver. I have a gear wrench set but could honestly get by with a dollar store set most of the time.

[@TheAutoTech]

Snap on screwdrivers are one thing I’ll gladly pay $200 for, I even have a set at the house. Do I need them? Probably not, but I like them.

[@tubergenmotorsports4193]

Great info! I've been looking at snap-on screwdrivers for a long time (like 30 years) but when Craftsman sets go on sale for 9.99 you can't beat that even if they ware a bit faster. I did get lucky a found a few snap-on drivers at yard sales and the tips are slightly better "harder/and have like blasted tips for grip on screws.

[@scottpearsontoolsmore185]

Great video thanks brother. I started out with Craftsman screwdrivers. I got my first Snap On flat set in 82 or 83 I still have the set. The most useful set I own is the Mac ratcheting screw driver set. I would have probably went nuts with out it all kinds of bits including security bits and a T handle. I did get another set of Snap On comfort grip Phillips and flat. I got them because I bought a lump sum of tools at a sale. I don't know much about the car and pickup truck industry. I do know that semi trucks and trailers and heavy equipment sockets and impacts. The only time you might need a regular screwdriver would be dashboard. Fuse and breaker box you might even have to get out the precision ones. For the most part ye not necessarily needed much anymore. Keep up the great work see you in the next video thanks again brother

[@suezanarms1287]

Mike, thanks for the point of view. I'm gonna follow your advise. I think if I find a screw driver that fits my hand and feels comfortable to me I'm gonna run with it. Thanks from us new guys that are sweating on buying that hi end don't have any money tool. Thanks for telling us about that impact screw driver tool. That you think is a must have. ;)👍👍

[@samwittstruck.6685]

very good advice.

[@wyattoneable]

"It's a pry bar". That made me laugh but it has become so true. Beyond hose clamps, I still see a few flat heads on my 55 Chevy truck but that's about it.

[@jonathancorrigan1460]

personally as a marine technician I switched from husky to snap on because all my husky screwdrivers broke on lower unit drain plugs or corroded screws from the stupid saltwater.

[@mandapalque]

You advices are VERY well appreciated. I am making better decisions by listening to you.

[@matthannah4621]

Only reason I have such a wide array of so many hand drivers and t handles is because of my 4 years spent as an aftermarket 12 volt installer. Screw guns are tempting for dash work etc, but when you're working on a "lot fresh" Lexus installing a dash cam for the dealer so they can sell the car, one slip of the screw gun will ruin a 3000 dollar dash pad, and you end up spending 12 hours to replace it... been there, done that

[@Toyotas_n__Tools]

Try using the ball grip vessel screwdrivers, also the ratcheting ones are really nice. I been wanting to get some with the blue handles and knurling.

[@FECOSERVICE]

I used Craftsman screw drivers whenI was younger and every other weekend I was at Sears getting a replacements. Then, I bought a set of Snap-on screwdrivers 35 years ago and still have them today. The bits have been changed but I did not have to buy another set.

[@blakewaddell451]

I use screwdrivers to take the screws out of door panels and I work at a shop with a strict policy of no power or air tools on the interior of cars and also I work on a lot of old things with the flat head screws you can't take out with a socket

[@rstar88105]

I like those 2 foot long cabinet flat blade screwdrivers for pushing off coolant hoses so you don't get soaked. They also make it possible so you can challenge your fellow technicians or service writers to a dual. :P

[@PaulyD0859]

Tools do not make the craftsman. I’ve never put a tool truck guys kids through college.

[@montevallomustang]

I would rather put my snapon guys kid through college than put some Chinese kid through college

[@Davobeff]

Never owned a snap on spanner(wrench) or socket and still been quicker than most guys that do.

[@prevost8686]

Montevallo Mustang You’ve got a legitimate point... to a point. Matco’s German made screwdrivers are my favorite but at $250 a set I can understand some people not buying them. SK offers the lowest priced USA made screwdrivers and they’re still about $100 set. Unfortunately the costs of USA made tools has skyrocketed a lot more than technician wages.

[@dnzgarage]

@@montevallomustang true dat

[@collisiontech_nick399]

I use torx screw drivers all the time along with numbers 1 2 and 3 Phillips, I’m a collision repair tech so the life of a screw driver is vastly different. When it comes to doing a over haul on a bumper I’ll agree that an impact and some nice bits are the way to go.

[@mikezupancic2182]

I can think of one thing I would buy on a tool truck if available. If they made a sized file that would fit squarely into the recesses of the caliper where the stupid stainless clips go that the pads slide in to. To this day I cannot EVER get a replacement set of pads in without grinding away at something or just trashing the clips all together.

[@martinschaffmeir7729]

Good post sir. I'm in a faze were I use bits in a 1/4 inch ratchet and extension. Good screwdrivers are great to have, I do have an old wera #1 Phillips that's really held up well. I bought a 26pc screwdriver set for 20. Bucks on sale at Napa and the torx in it saved my butt and I do have a couple of snap-on I don't have a impact driver, yet. Looking in to it tho

[@justinfranklin204]

I’m a firm believer in snap on screwdrivers. I’ve had many stripped screws none of my cheaper screwdrivers or impact driver would get out.. snap on got them right out.

[@navedemor5056]

Funny I finally bought a nice set,. Been using Mastercraft ones forever but one week after buying the snap on snapped the head off one of the snap on ones lol

[@Freetheworldnow]

Fuller and Craftsmen never let me down. I use a drift punch to creese the axle nut.

[@kevinavery2518]

I do have a use for smaller flat heads

[@jairosendsit8667]

I have one matco set I guess I really didn’t need to spend the money but fudge it I got em and there nice probably the last set I’ll ever need unless I lose one

[@Lasurge1982]

I used a 6 in one husky screwdriver for years when I did plumbing. It was the only thing I grabbed. Years ago.

[@jdmkidd1263]

Thanks for this video helps

[@garybuelow5362]

Great video, Good quality screwdrivers for special applications like BMW door handles long torx with thin shafts, other than special needs , have been using power for years.

[@mcskrillabizkitdrillaweebl8008]

The newer mac tools screwdriver set is awesome the stubbys have perfect gripping ability for good torque in a stubby thats what sold me 105 for 8 piece set i dont regret it and use.them daily

[@whitetiger8652]

Great advice!

[@Khaosgardenz]

I think the best screwdrivers for a decent price is actually the Carlyle tools Screwdrivers you can get from Napa great handles been using them almost a year and love them so much better fit in screws compared two my other screwdrivers I had which was duralast and Pittsburgh the duralast we're decent but the handles kinda suck

[@talkinhogspodcast6545]

Having a good flat head is especially clutch when you strip the life out of a bolt and cut a line in it

[@genxmurse7019]

Vessels are awesome. I got one shipped to me, and it's a great screwdriver for the money.

[@andrewhutchinson5490]

When time is a an issue a screw gun is your friend, but I use my screwdrivers tones in my own garage. I feel you get a better feel for what your doing with one, and when it is your own stuff why not be extra careful.

[@josephjudge7250]

I always use vessel screwdrivers. The best on the market

[@adama5392]

I also bought a set of hi vis green Kobalt screwdrivers that are exactly the same as the Matco set was that year.. Work great. The diamond tipped Craftsman screwdrivers arw really nice for the $ too they really grip well and have a lifetime warranty. When on sale you can get some great deals from sears still, like craftsman branded Nubla USA hammers and lisle tools etc. too bad it looks like it's all about to be over for sears within the next year or so... The no longer have any3rd party high end tools like Wera SK Weha.. All suddenly became sold out last week.. Glad i got all my stuff ordered before...

[@bosborn1]

Love my Vessel. I use screw drivers for electronics mostly. I just don’t like using the impact on them.

[@abelgonzalez9292]

I agree, I currently have two go to screwdrivers they are the Milwaukee demo screw drivers cost 10$ for Philip and flat I’ve only broken the flat tip because of prying on something I shouldn’t have. Other than that the only other screw driver I reach for is a stubby

[@joelopez40oz23]

My favorite screw driver is my Milwaukee screw gun. Screw guns are great for interior work. I rarely use my Snap on screw drivers.

[@unclebob4208]

+1 for the Vessel JIS impact.

[@UnitedWarGamers]

I use the green Harbor freight because they are a solid screwdriver with a cap and my long tekton screwdriver

[@LordRumple]

A good Phillips tip is night and day compared to a bad one. Lifetime warranty on flat heads is a must and really for Phillips too once the tip wear out.

[@andybub45]

As others have said, no, you don’t necessarily need them. But they are really nice to have. If you are new to the game and you don’t have a student discount with any of the truck brands I’d recommend going with a middle ground brand like Tekton or Gearwrench. I had a Snap On student discount and I was able to get a great deal on a set of Snap On screwdrivers. Plus my dad has a set thats over 20 years old, and they still work great. But there are some things that you should definitely buy from the trucks, pry bars and picks to name a few. It’s worth the extra $$$

[@dillwiggle2]

I mostly use a #2 phillips screwdriver more than anything and a couple size nut drivers for the hose clamps. Tekton actually makes a good screwdriver now and pretty darn cheap.

[@smitty2jones]

YES. Screwdrivers are one of my most broken things, whether it's removing those stuck rotor screws or, uh, totally not prying on something, I break several per year. I have a Wera #3 phillips screwdriver that broke within a few months. Nice tool, but it cost just as much as Snap On and has been sitting there broken for a year now because the warranty isn't nearly as quick/easy.

[@anthonygm85]

I'm getting a set of torx and Allen style screwdrivers for my harley Just as backs ups and tool roll stuff

[@thatcrazywolf]

I disagree. I find my Snap On #1 #2 and #3 screwdrivers are great for super tight screws.but I bought those individually on eBay. You're right about flat head screwdrivers though I use the free ones from Harbor Freight

[@LilasTools]

Wera and Vessel screwdrivers are awesome!

[@mecalpsha4473]

VESSEL on all motorcycles Yamaha/Kawasaki/Honda/Suzuki ect... - The ONLY ones to use!

[@dcyamahatech]

I agree 100%.. we are the exception I think. Japanese atvs and bikes are littered with Phillips screws. I do have 3 snap on screwdrivers and all are Phillips. I absolutely love mine. The next set I really love is a kobalt soft grip set. I've read they are basically a Matco screwdriver..

[@blakerblaker2550]

@@dcyamahatech Us Powersports guys depend on our quality screwdrivers, haha

[@dcyamahatech]

@@blakerblaker2550 that's a fact lol...I may be crazy but I swear the snap on Phillips I have will pop carb bowl screws like its nothing. They just seem to bite better. Work on a early Yamaha and I guarantee you'd appreciate a good screwdriver lol. There's a damn 5 gallon bucket of Phillips screws in those

[@blakerblaker2550]

dave c yep I actually use my long snap on Phillips on almost all screws if possible, you get more torque out of it

[@harveysmith100]

I agree with using the Vessel. The reason being is, on Japanese products, they aren't Philips screws. They are JIS, (Japanese Industry Standard) Vessel are JIS.

[@mikesmith406]

Craftsman work just fine..when your not using a gun most of the time. That being said..I love how Mac screwdrivers feel in the hand..so I bought 2 of em. One number 2 Philips and one flathead.

[@brianacoates33]

For a body tech standpoint, you 100% need good screwdrivers you use them all the time and cheap ones have bad tips that ruin the screw so. Plus you need torx ones as well for the outer handle of doors.

[@toolsmetals2148]

I 💯% Agree and the vessels Yes without a Question 👍

[@toptech7918]

Damn I thought they were prydrivers so yes I break them lol

[@zubirhusein]

I keep stubby hand screwdrivers around for the places a screw gun won't fit

[@cosmorobinson5776]

You need a quality screwdriver when working with old carburetors, I have had the same snap on screwdriver set since 94.

[@mrsquirel1]

2 part question. Did you by a set of them or just 1? if you bought just one, which #? I would use it mostly for rotors, so ass-u-me #2. Thanks for all the great videos.

[@nicholasmartel001]

The only reason I bought a matco set of screwdrivers is because my dealer couldn't sell them and he was gonna send them back. I paid cost for them so he didn't have to pay the restocking fee and then gave my carlyle set to the kid next to me because he didn't have a full set.

[@XXGunzNClipzXx]

Honestly I just got mine because I wanted a set that came with its own case I have regards screw drivers in matco green and long tips on snap on classic red I never use the long tip I completely agree on a waste of money but the matco set I use all the time for interior or quick and easy under shields

[@buildurtruckurway9118]

Really depends on the type of mechanical repairs your doing or the type of technician you are. Small engine/atv motorcycle mechanics will flat out admit a top shelf set of screw drivers are a must. Aviation mechanics use the Phillips 90% of the time, so any other driver can be a cheapo. a heavy duty tech that deals with the sheer amount of electrical and small junction boxes and filter housings that are on a highway tractor unit you absolutely need a good set of screw drivers. As a guy that previously was an automotive mechanic I only used a Phillips on a near daily basis and I usually was using it on my manual impact driver to bust screws loose on rotors so I mostly needed high end bits not high end screw drivers. I found I actually needed less tools in my tool cart as an auto tech then I even needed repairing ATVs and motorcycles at honda. But specialty tools I found the HD guys had to spend way more money on then any other trade, as one day your working on a bulldozer in the shop or re sleeving and rebuilding a Kenworth the next day pending on the shop your at.

[@richardolsen6476]

Typically anything plastic that has screws I’m using my impact driver with screw bit but anything that has rust or corrosion usually metal screws in hole I’ll use my snap on set. Could probably get by with lesser brand but I have warrantied about 3 times do I would say they are getting close to paying for themselves and I’ve only had them for about 3 years

[@strykerls3740]

I use Milwaukee screwdrivers I got them for 25$ set of 8 I use them professionally everyday and I only use the flatheads as small Pry bars I’ve flex them quite a lot. And they are still going strong. Everything else is off the tool truck. I rarely use the others.

[@ClaytonBridges]

Also get a rolgear bit driver and a decent bit set

[@johnb1121]

I own snap on screw drivers once I found out that Mac replaces the hole screw driver I went 2 Mac...

[@cjcutter1571]

I have them all pretty much all work about the same!

[@iamtheliberated]

I bought a set of Milwaukee screwdrivers at the depot. I figured "Hey, if I destroy 'em, then I'll upgrade." I keep a set of cheap HF screwdrivers around for fun tasks like persuading stuck dust caps, deburring brake lines before flaring (it works), etc. The Milwaukee set barely shows any wear. Those situations where a screw gun isn't going to end well, they haven't failed me yet. Some of the screws have, sure, that's the risk you take with rust. Now, would I love to have an ultra high quality screwdriver for use outside the shop? Sure. But I don't need them...yet.