DOD/AFM DELETE on my 07 suburban

[@coreypuck3295]

I also like that you painted some parts. Looks sharp.

[@a.c.c.3455]

Thank you

[@yotaengine]

Definitely one of the best dod videos out there. Thanks for taking the time to work and film at the same time. I wish i could do that but i cuss too much when I'm wrenching.

[@a.c.c.3455]

@@yotaengine thank you , and believe me I did my fair share of cussing off camera 😂

[@MrDmacc1]

​@@a.c.c.3455is it necessary to switch to a high volume oil pump like a Melling 10355? Also which are the best type of lifters do you recommend, there's a kit online by

[@luiscintron8018]

I've been looking to do this with my 07 Tahoe for months. This is the best, most descriptive video I've seen. Well done sir, thank you.

[@a.c.c.3455]

@@luiscintron8018 thank you for watching and commenting, I'm glad I was able to help you in any way.

[@guillermocuevas1306]

Perfect video straight to the point and no bs.

[@a.c.c.3455]

@@guillermocuevas1306 thank you for watching and commenting, I'm glad I could help in any way.

[@shaynes21]

Ordered my kit yesterday from AMS. Got a truck Norris cam for my 2011 Silverado. Great start to finish video!!!

[@a.c.c.3455]

That's awesome 😎 and thank you for watching 😃

[@hamletxxx1363]

Same thing I'm doing to my 2010 Yukon denali

[@zachaguilar9222]

I got a 11 5.3 Silverado as well. What did this run you? Did you upgrade the cam?

[@a.c.c.3455]

@@zachaguilar9222 $1000 for the parts … no cam upgrade

[@samuelherr4604]

Love the sanding in the engine bay always make me chuckle

[@a.c.c.3455]

@@samuelherr4604 thanks for watching and commenting, I don't remember doing any sanding in this video.

[@johnnielsen5076]

Excellent video...your a hell of a shade tree mechanic. No B.S. easy to follow how to. Two thumbs up!

[@a.c.c.3455]

@@johnnielsen5076 thank you and thanks for watching 💪🏽💪🏽

[@jasonmoore9968]

Fantastic video man. Thank you for taking the time to make a video that is thorough and easy to follow for those of us about to knock this project out!

[@a.c.c.3455]

@@jasonmoore9968 glad I could help and thank you for watching 💪🏽💪🏽💪🏽

[@charliegarwood]

I appreciate the time and effort you put into recording & posting this! Helped get me through this project!

[@a.c.c.3455]

@@charliegarwood glad the video was helpful and thanks for watching 💪🏽💪🏽

[@MrDmacc1]

​@@a.c.c.3455This is the best dod delete videos I've seen , you know what your doing. How much would a delete like this one cost?

[@mack606]

This is one cool brother here I watch this video like I watch blood in blood out that’s how good this video is keep doing your thing brother

[@a.c.c.3455]

@@mack606 thank you

[@GABEworld420]

Man you don’t know how easy you made this install kit for me foreal

[@a.c.c.3455]

@@GABEworld420 thank you for watching and commenting, I'm glad I was able to help you in any way.

[@joeybroome1743]

You got the oil pan bolts out before you drop your front axle

[@a.c.c.3455]

@@joeybroome1743 thank you for watching and commenting, I hope my video was able to help you in any way.

[@yeloboi52]

You are a good dude my brotha! That engine bay looking sweet! Nice color combo!

[@a.c.c.3455]

@@yeloboi52 thank you

[@edwardr3993]

Des wus sup bro ! Lots of respect for a guy who knows what he is doing 👍

[@a.c.c.3455]

@@edwardr3993 thank you for watching and commenting, I really appreciate the support 💪🏽💪🏽

[@abefroman561]

Great video it was a BIG help doing my delete! Thanks man!

[@a.c.c.3455]

@@abefroman561 thank you ,I'm glad to be helpful

[@moneymaker5052]

Great video....lots of information 👏🏽 👌 👍🏽

[@a.c.c.3455]

Thank you for watching

[@KenWayneJohnson]

Man very thorough video , very informative im a mechanic the only thinh has me haywire is the tune side can i just use a dod/afm delete chip plug in or need tune? If you dont mind when have time to lmk thanks god bless.

[@a.c.c.3455]

@@KenWayneJohnson thank you for watching and commenting, the kit I used came with a tuner to turn off the afm/dod in the ECU ... before I did the dod delete I had a plug in dod delete device and it worked for a while, but eventually the truck still dropped a lifter. I hope this helps you.

[@thechoznjuan6886]

Excellent video! Thanks ACC

[@a.c.c.3455]

@@thechoznjuan6886 thank you for watching 💪🏽💪🏽💪🏽

[@Moe10st]

Great video bro helped me a lot with my 09 Tahoe. At the 38:00 mark where u didn’t drop the rack pinion just took the line off I did just that but can’t get it pulled back over to put it back on

[@a.c.c.3455]

Make sure the oil pan is pulled all the way against the block and bolts are torqued, you should have the clearance to reinstall line. I hope this helps

[@Moe10st]

@@a.c.c.3455 thanks bro appreciate you!

[@ozoneswiftak]

So.. you did all that, but there was really only one collapsed lifter. Was the lifter collapsed because the spring inside was broke? What causes a collapsed lifter. Doesn't the oil pressure on that cylinder collapse it in 4 cylinder mode?

[@l.boogie2764]

Im shock you aint just put a bigger cam since you had to go in and replace those weak stock chain tension guides with a solid corvette dampener. Just a thought to prevent failure later.

[@a.c.c.3455]

Didn’t need any of that for this truck, I have other cars for that. Thanks for watching

[@CarlosUrielRojoFerrer]

In summary ams racing is safe!!! Greetings from Mexico

[@a.c.c.3455]

@@CarlosUrielRojoFerrer yes still going good, thank you

[@MistaReason1]

Thanks for posting. I’m going to do the same job on my 2011 Chevy Avalanche. #3 cylinder misfire.

[@a.c.c.3455]

@@MistaReason1 thank you

[@Johnny-jr2lq]

Had to come back to this video and mention. I think and don’t quote me on this because you have a gen 4. But when you cranked it over for the first time and your oil pressure up 80. I think it might of failed but not in the way commonly seen. My gen 3 actually did that not sure exactly what happened in it. But it kept popping oil filter gaskets so I swapped oil pumps and normal 40 to 45 psi oil pressure.

[@a.c.c.3455]

@@Johnny-jr2lq Thank you for watching..I installed a high volume oil pump and deleted the in pan relief valve, also it had fresh cold oil. Now it usually sits around 50 psi at idle and about 60 psi while accelerating.

[@Johnny-jr2lq]

@@a.c.c.3455 Nice!!!! As I’m attending KZbin university learning how to do my own LC9 AFM/DOD delete. I figured out that the Melling high volume oil pumps are a must “while your in there” doing the delete. So sorry for the for the ignorance in my comment. Still learning about this can’t wait to get that AFM BS out of my truck’s motor.

[@jamesbryant5350]

Good job simple straight forward in order 👍

[@DDISM]

#6 just dropped on me yesterday 🤦🏾‍♂️.... Your video really got me thinking about doing it myself. Gotta make the time tho to busy working on other people cars 😂. But good stuff bro 💯

[@a.c.c.3455]

@@DDISM thank you ....it sucks that they added DOD to these trucks

[@coreypuck3295]

I like the video. I'm going to get a kids pool for fluids too now. How you like the Ryobi tools?

[@a.c.c.3455]

Ryobi ratchet works really well…just remember to break the bolts loose by hand

[@letsgoracing78]

I thinking of the same thing but if I'm going that far into the engine I'm thinking of just taking it out and completely going through it

[@a.c.c.3455]

@@letsgoracing78 that's a good idea , thanks for watching 💪🏽💪🏽💪🏽

[@cartelmigi7044]

How did you paint the part the paint came out nice doesn’t look bad like others

[@jamesmock8685]

I looked up so many videos.. never seen this one till after my Job was completed. It was as if the KZbin did not want me to fing the good video 😢

[@a.c.c.3455]

@@jamesmock8685 thank you for watching and commenting, unfortunately I'm not the popular in that KZbin algorithm.

[@thaanswer500]

I wish you were in MD, id hire you to do this mess on my caddy

[@a.c.c.3455]

Thanks for watching

[@brianvalentinesr7208]

You where a lot of help Thank you sir.And God Bless you

[@a.c.c.3455]

I'm glad i was able to help, God Bless you too and thank you for watching 🙏🏾

[@JamesSmith-j1z]

I loved the video and i am on round two watching it again. I just bought a 08 gmc w/5.3 that needs a cam. After seeing you do it im going to give it my best effort. What paint and color did you use? Its beautiful. And what did you use to block of the relief valve in the oil pan? I dont think i can fit between the front of the engine and radiator like you did. Thanks again for the great video

[@a.c.c.3455]

@@JamesSmith-j1z I’m glad my video was able to help you….I used a screw in plug in the oil pan , I used sail blue rust-oleum spray paint, and I would like to thank you for watching and commenting on the video 🙏🏽🙏🏽🙏🏽

[@jaimemendez1269]

What screen did u have up In there

[@waltrob1680]

What is your fuel mileage like after doing that? I had my Tahoe done and I get about 12 miles per gallon now.

[@russianroulette3476]

Good video bro frfr should have more than 3.3k views

[@a.c.c.3455]

@@russianroulette3476 thank you

[@RicardoBobby]

Great video. I’ve done this job multiple times. Your video was perfect and to the point.

[@a.c.c.3455]

@@RicardoBobby thank you

[@asleeperj]

It's been a year how has the kit held up?

[@a.c.c.3455]

@@asleeperj still going strong, I drive the truck daily..... thanks for watching

[@mack606]

I also have to do a vvt delete as well do I have to replace the beehive springs as well or just leave them alone

[@a.c.c.3455]

No need to get change unless you’re going upgrade the cam.

[@brianvalentinesr7208]

Sounds damn good .my friend

[@a.c.c.3455]

Thanks and thank you for watching 😃

[@eugenegreen5762]

Did you put a oil pressure switch filter screen under your switch

[@a.c.c.3455]

@@eugenegreen5762 no I actually took mine out ,but it's easy to replace and should replace it if it's never been changed

[@eugenegreen5762]

Have the same kit trying to put one in doesn’t fit

[@a.c.c.3455]

@eugenegreen5762 did you remove the old one ?

[@eugenegreen5762]

Email ams racing they said doesn’t require one, thank you for video

[@armandosaenz5588]

Can you do my 2011 Tahoe!! Cylinder 1 has a stuck lifter

[@whtevagaming]

if you not gonna say she the best in the world at least give her the whole state maybe even the country lol, great video tho very helpful.

[@a.c.c.3455]

Your absolutely correct ✅…and thank you for watching

[@Eric-pi8hi]

What color did you use

[@a.c.c.3455]

@@Eric-pi8hi rust-oleum sail blue

[@jonathanbrowning8005]

Did you have to change the push rods are they a different lengths or will the factory ones still work I got the same exact kit you just done but I didn't get no push rods

[@a.c.c.3455]

@@jonathanbrowning8005 didn’t have to change the pushrods but i did it anyway, if you’re going to reuse the factory pushrods make sure to put them back in the same place they came from

[@davntelisha19]

What torque wrench is that your using to torque the heads

[@a.c.c.3455]

@@davntelisha19 www.harborfreight.com/12-in-drive-125-250-ft-lb-digital-angle-torque-wrench-64916.html?event_id=183642&campaignid=12192884362&adsetid=116489885225&product=64916&store=352&gad_source=1&gbraid=0AAAAADAHb4drLhREfwT7kMoytiNjCO-10&gclid=Cj0KCQjw3bm3BhDJARIsAKnHoVXEdzLoU2IQhqt1Pd3PuFMGZGi15GxqtLGYoXVem-6e26BnZ5EveYsaAti6EALw_wcB

[@michaelmccaslin7719]

Great video, thank you for posting. Im in the middle of my cam/lifter repalcement. Watching lots of videos. Yours is the only one ive seen that removed oil pan? What made you feel that was required? I was only intending to replace oil pump on front of engine, not aware of any need to mess with oil pan but im a novice at best and want to make sure I'm not missing something. Thanks again!

[@gabinobarrerajr]

I’m looking to do this job myself also, and was also wondering the same thing about the oil pan removal…

[@bugsy74]

Does that head unit you have control the dvd player? I want to get rid of my dvd player and install Something I can stream or use a usb

[@a.c.c.3455]

No but you can stream with it

[@derrickjfprice]

How much something like this cost?

[@a.c.c.3455]

@@derrickjfprice thanks for watching and commenting, the kit cost me about $1000 and labor was Free because I did it myself,but would vary with different shops and states

[@joshhernandez2144]

Will the kit you used work for a vin 8th digit number 3 2007 suburban 5.3? By the way this video was helpful 💪

[@TRIGG.04]

Had lifter tap bout 5 months ago got it fix new liters gaskets rods but I didn’t do a DOD delete now the tap is back do you think I will be able to do a DOD delete myself or should I get a professionally done? I have installed a water pump before alternators that about it though.

[@a.c.c.3455]

@@TRIGG.04 you probably could do it , just have to take your time…. Watch a couple videos to see if it’s something you would be comfortable doing first….. The only issue would be if you mess something up you have to pay and go back to fix it.if a professional mess it up they have to go back and fix it for free.

[@scottbiste4616]

Great video. I have a 07 suburban 1500 4x4 5.3. Been wanting to do the same but i never tore a engine apart like that before. Done everything but that. The timing chain part is wht holds me back. Any tips for a newbie when it comes to the timing and camshaft install. Tks bud

[@a.c.c.3455]

Take your time when installing the cam (be gentle) you don't want to damage the cam bearings, I have a video on installing cams in a ls. Timing on these engines is easy just make sure your time marks line up,I also have a video on installing the timing chain on an ls if you would like to watch it.

[@scottbiste4616]

@a.c.c.3455 Yes any video of it would be appreciated. Tks again

[@Kiowagoodfella]

I had a mechanic do this on my 07 Suburban and still having low oil pressure problems when I come to a stop sign pressure gets low and starts to tick a little. Once you pick up speed the oil pressure comes back up and tick goes away, you have any ideas what could be causing this? Someone told me maybe a bad lifter, what do you think?

[@Reaperhydraulicstampa]

Will a failing DOD cause your engine to smoke? Mines running like it's missing on multiple cylinders so I think it's the DOD. My 5.3L has 236K miles

[@a.c.c.3455]

Possibly … thanks for watching

[@BobSmith-b1b]

Probably valve seals bad

[@jaeshawngrigsby1746]

Will the same parts work for 02 Tahoe 5.3l Ls?

[@a.c.c.3455]

@@jaeshawngrigsby1746 everything except the cam I used. It's a one bolt can and your motor should have a 3 bolt can

[@mack606]

Bruh do you have to replace the valve springs

[@a.c.c.3455]

@@mack606 only if you put a bigger cam in it

[@mack606]

@@a.c.c.3455 I’m putting in the truck Norris cam and thanks for reaching out

[@a.c.c.3455]

@@mack606 it says No spring upgrade required, but it wouldn't hurt to upgrade while you're already there especially if it's a high mileage motor

[@mack606]

@@a.c.c.3455 thank you brother I was thinking the same thing I have one more question is it okay for me to use a scotch brite pad to clean the heads I was told not to use them on aluminum and do I need to take them to a machine shop to get checked and resurfaced trying to make sure I got my ducks in a row before I start

[@Moe10st]

Great video bruh it helped me a lot doing my 09 Tahoe! I have one question at the 38:00 I didn’t drop the rack pinion I took that bolt out like you did but now it’s off where I can’t attach it back over

[@mack606]

Brother how many miles on your engine when you did your dod delete

[@a.c.c.3455]

@@mack606 197,000 when the lifter dropped

[@mack606]

@@a.c.c.3455 mines have 220,000 no lifter has dropped would it be worth me doing it or just replace the motor I like working on cars and wanted to accomplish this goal to see if I can do it sounds crazy but I can see the satisfaction you get from working on cars

[@hunterfankhauser3289]

@@mack606either take it to a shop or buy a cheap borescope and check out your cylinder walls. As long as there isn’t a bunch or deep vertical scoring, you can still get another 50-100k miles from a top end rebuild.

[@mack606]

@@hunterfankhauser3289 thank you brother I will definitely do that

[@kenroy6486]

Excellent video thx 👍

[@michaelbecker7040]

love the vid just for next time put the lifts in oil for 10 minutes better for the first start

[@a.c.c.3455]

@@michaelbecker7040 the lifters came pre soaked in oil already…. Thank you for watching 💪🏽💪🏽💪🏽

[@michaelbecker7040]

oh ok that’s better then nothing lol

[@jr.a4955]

Yo what oil pump did you get?

[@a.c.c.3455]

@@jr.a4955 melling hi flow oil pump

[@mack606]

Is it necessary to have your heads resurfaced before reinstalling them or just clean them up real good

[@a.c.c.3455]

@@mack606 not necessary if the engine wasn’t running hot before disassembly

[@mack606]

Brother I’m fixing to start my delete but my 2011 Yukon Denali xl 6.2 has the vvt timing that I want to delete can I replace with the regular timing plate cam gear or does it have to be tuned too

[@a.c.c.3455]

@@mack606 yes you can replace it with a regular one ,

[@mack606]

How much is a job like this cost parts and labor

[@laniknight-g8f]

If you do it yourself around 1000. If you get someone to do it around $4500

[@a.c.c.3455]

What the user said is correct

[@PokeDave978]

$1000-1500 yourself or $4000-$5500 depending on options you have

[@vicente5776]

Wow, You did not center the oil pump gear. 0.02

[@a.c.c.3455]

@@vicente5776 not necessary, thanks for watching

[@elms1319]

💯 good lookin’

[@a.c.c.3455]

@@elms1319 thank you

[@brandonarmscorp.vanheyning3256]

Add a cold air intake and a cat back , she'll run even better , nice job man .

[@a.c.c.3455]

@@brandonarmscorp.vanheyning3256 thanks for the advice and thank you for watching

[@davntelisha19]

Like that paint scheme hard

[@a.c.c.3455]

@@davntelisha19 thank you

[@vicente5776]

Back yard monkers shade tree.

[@a.c.c.3455]

@@vicente5776 thanks for watching

[@JosephColon-wy1ii]

You took way too much shit off bro I didn't take my radiator off just the hoses not the trans line at all just water lines I didn't even take my ac compressor off I took the whole brakes on the right side off and let it sit down right where it is but away didn't disconnect nothing on that side besides fuel line injector harness and spark plug wires u just did way too much for nothing

[@a.c.c.3455]

Thanks for watching 💪🏽