Dodge Dakota Fuel Pump

Replacement of fuel pump and housing on a 1991 Dodge Dakota 4x4 extended cab with 5.2L V8

[@b.c.delevin4916]

Thanks to this video I was able to replace a fuel pump for a 1995 Dodge Dakota Sport. I unbolted and raised the bed. I had a difficult time reinstalling the overflow plastic elbow. The gas gauge is now bouncing a lot, and I don’t know if the float is out of position. It runs and passed smog. So hell, it’s now for sale. Going, going, gone.

[@farklebarkle]

Thank you for the video Rudy, it's helped me quit a bit with the finer parts of my fuel pump removal.y Napa pump will be here in the morning for 140 American. I didn't have my own bed so the brackets required a 1/2 inch drive 14mm deep socket and some Blaster penetrating oil. The wd 40 didn't cut the mustard and the 3/8 drive deep socket was too short! Thank's again and have a super day!

[@dapperwounded]

Gonna be doing this the day after Christmas so I can drift in the snow

[@ryanhall591]

Hey thanks for the video man, it helped out a lot with the truck I just bought.

[@jaredadams731]

Same here

[@joeherrera2405]

Yo pro tip (I’m not a pro but whatever) don’t break that pressure relief/rollover valve because you’ll have to pull one off a truck at the salvage yard which isn’t bad but just saying they don’t produce that part no more. 🤙🏼

[@Br4vehe4rt]

Guess what I broke it. Not even kidding. 3 dudes tried putting the bed on me my friend that didn’t really wanna help and my dad. It was heavy and bad and when we put it on all u hear is a crack

[@JKinder313]

@@Br4vehe4rt What is the job looking like now? I may be going down the same road. Hope all I need is spark plugs. I'll change them after work. Yesterday changed the fuel filter and my truck rode just fine. Today it is running rough again.

[@JoseReyes-wo2lm]

( What about the submergible hose ? What about it? You didn't replace it? Tell us about it? Is it special! ) Need reply!)

[@Mechanicsville804]

Great video!

[@no_slaw]

Where can I get a 5 wire electrical connector. The previous owner cut his and put an inline but I wanna get it back stock

[@stanleygardner146]

Yeah 5 prong

[@michaelmask7296]

Almost impossible to find I know

[@weldorguy]

Hey brother, nice tutorial, I found the easiest way to change the toro snowblower belt....and posted it on my channel thanks to your video for the idea. I tried to comment on your video, but comments are off. Kindest Regards, and please feel free to critique :) J

[@dennis2527]

Does the gas gauge fluctuate when truck in in motion, i.e., coming to a stop or does it have a stop so it will not do that? When I take off it goes back and the opposite when I come t a stop.

[@rudijones]

My gauge bounces all over the place. Has since I can remember.

[@Mechanicsville804]

John 3:16 For God so loved the world that he gave his only begotten Son that whosoever believeth in Him shall not perish but have everlasting life.

[@ifunnymexican5503]

Will this work for a 1990

[@enriquecarranza3526]

Me podrías ayudar? Tengo una Dakota 1992 estándar V6 motor 3.9 Necesito saber que ECM le puede quedar de que sea compatible por el modelo.

[@nater567]

holy shit this couldn't be any more canadian lol. great video though thanks

[@dougasbailey6864]

What is best way to cut hole in truck bed. To get to pump _ don't want it to blow up?

[@rudijones]

Dougas Bailey I would say the safest way would be with a jig saw with a high quality metal cutting blade. Make sure the blade only goes through the metal and not through the tank (use a short blade). Have a fire extinguisher close, do it outside and don’t cut if you smell any gas fumes.

[@dougasbailey6864]

@@rudijones ok. Or maybe a saw saw

[@rudijones]

Dougas Bailey yes just want to keep the sparks at a minimum.

[@dougasbailey6864]

Ok thanks

[@dougasbailey6864]

Sorry to bother you.need ur opinion. I turn key and I hear primer pump coming on.. Now I'm thinking crank sensor or smithing? Don't no?

[@mopardoctor9966]

BE VERY CAREFUL with the rollover (vent) valve. Difficult to remove,impossible to find a replacement. Use old grommets if possible. I have found the new grommets don’t fit. Supplied pump to tank seal is too thick, use old one.

[@juancarloscuevasconejo6151]

Que tal me gustaría como se trepar el filtro de gas

[@noahm3009]

My feed line wont stay on and i tightened the fuck out of a hose clamp on it?? Im justing using regular fuel line since that last peice i had broke

[@UnderDuress]

........The part number would have helped tremendously 😞

[@mopardoctor9966]

Sending units on Dakotas are crap. Bounce all over and will break before pump quits