Dodge Grand Caravan | Blinker Switch Replacement

How to replace the blinker switch on a 2005 Dodge Grand Caravan. Has your blinker stopped working normally? High beams not working? Watch this video and maybe it’ll help you out.
2001-2007 4th generation Dodge Grand Caravan, Chrysler Town and Country

[@djangoletsgetitgarvey2857]

Thanks for taking time out of your day to film this for us viewers. It saved me alot of time.

[@timgoffard]

Thanks for the video! This was my exact issue with the signal blinking left when I wanna turn right! It’s frustrating!

[@JeffMcNeal]

Thanks for posting this. The cancellator on my switch stopped working after making right turns. Gonna just replace the whole switch and your post helped a lot. Cheers.

[@maxluvsdamother8872]

Brilliance! Thank you ever so kindly! You have me feeling confident in replacing this inexpensively!

[@barnburner2475]

Great video. Right turn signal would signal left turn, this should fix it. Thank you.

[@BanditRider86]

Thank you! Seems fairly easy gotta change mine out

[@lydiaangel5321]

Thanks for this video. So easy. I will be taking care of this issue myself 😁

[@mjl.9-19]

thank you! My dog chewed my switch handle. Great vid!

[@2010kekekeke]

Thank's, good job and good lesson

[@greggbell]

Thank you, worked perfectly!

[@bigd835]

very helpful video. my experience: I was in Phoenix and it was HOT. when i would put the turn signal on to turn left, the right blinker would operate. same for turning right, the left side would blink. I bought an aftermarket turn signal switch and replaced it. it worked fine for a couple months. now my turn signal will not turn off and cancel itself when making left turns. this is very common with the aftermarket turn signal. they break quickly. hese are simple and there is no excuse that the aftermarket ones break so fast really annoying

[@lynnwagnerl5408]

Thanks an easy representation for me

[@Truth-Is]

Thank you, for this video.

[@chuckamok63]

Nice video, thank you. My switch was greasy like yours, I wonder if it leaks over time creating the issues?

[@henryssurfshowcase]

Good one, my blinker was going for a long time and now its totally toast. Hopefully this will fix it, or could be the relay underneath?..

[@deanjagger1190]

All the light's on the dash all went on, and the wind shield wipers, in my 2014 Town and Country van. Drove me crazy, still can't find the reason. Do you have any tips??? Any video's you recommend? Maybe I have to do what you did in the video. How would you check out the rest of the van for electrical problems? Do you us electrical cleaner, and grease when you work on the conections?

[@edithofr.i.emeraldisle5042]

Wow....my 2002 caravan sport headlights are fine but blinkers act just as you described. Proffessionals put in two different brand new switches and then nothing worked....they put the old one back and it works the same as before. They said they must search for " a wiring Issue". Any ideas? My brother says get a salvage part from this same year because new stuff is junk.

[@user-sv3lu5dg2p]

I have a 1999 Plymouth grand voyager. My left blinker works on and off. Any recommendations?

[@elliottcarson1248]

Could this cause the instrument cluster to short out too?

[@Jflowboston1]

Work great for my 2006 grand, thanks

[@alexiswarth1938]

Can this switch cause my drivers side brake light and tail lights not to work on top of my blinkers?

[@ore83]

If the bulbs are fine back there I’d take a stab at your brake light switch being the problem. It’s located behind the brake pedal under the dash.

[@trevorlegg4618]

I've replaced the switch and I've replaced the relays for both the hazzards and turn signals relays and still no turn signals or hazzards!! Any suggestions let me know!!!?!

[@ore83]

Trevor Legg the flasher, assuming you’re not calling the flasher a relay. I’ve seen that. Also make sure the bulbs are all new, just in case.

[@billbratt4048]

My issue is that the turn indicator doesn't return to the neutral position after the turn is complete and the steering wheel is returned to the neutral position. I saw a video that indicates that there is a piece on the switch that protrudes when a signal is put on and then, as the steering wheel returns to neutral, that piece contacts a piece on the steering wheel assembly that 'clicks' it back into position. Any insight?

[@ore83]

Replacing the part I did in the video should fix that

[@billbratt4048]

Thanks for the response!

[@nicholasstanchich5989]

can that switch cause ur low beams not to work only my high beams work

[@ore83]

I believe it could. Worth a try!

[@whitecoffee1427]

I had an issue where when I set it to turn right it would not automatically reset, not super important just super annoying lol

[@SteelHatKing]

where did you buy that part?

[@ore83]

Josh Patterson rockauto.com

[@man_ofthe_year6568]

I guess the jingle in the beginning of the video can be a bit confusing

[@man_ofthe_year6568]

And he also says multiple times where to get it

[@modoc852]

After replacing my turn signal switch the new one won’t pop back to center after making a turn

[@ore83]

Curious about your name, native? I’d test it out while it isn’t installed. Maybe you got a faulty one.

[@billbratt4048]

That's the issue I'm having, what was the resolution?

[@ashamalee85]

Mine don't have that part on it Could that be why my head light wont come on

[@AFloodofSolaceJohnWhigham]

My headlights won’t come on either

[@ashsvanlife]

Welp

[@kbprincess77]

That’s what she said. 🤣🤣🤣🤣