dodge magnum chrysler 300 front end swap

For more Great #Mopar content of me and my #dodge challenger #srt please click below and subscribe!
Check out this Custom Dodge #Magnum from the Magnum Mafia Canada Mopar meet with @fred_eazy21 !
Converting the front end of a Dodge Magnum to resemble that of a Chrysler 300 is a popular customization option among car enthusiasts. This swap can give the Magnum a sleeker and more upscale appearance. Here's a general overview of the process:
Research and Planning: Before starting the swap, research the specific parts and components needed for the conversion. This may include the front bumper, grille, headlights, hood, and other trim pieces. Ensure that the parts are compatible with both the Dodge Magnum and the Chrysler 300.
Acquire Parts: Purchase the necessary parts from a reputable source. You may be able to find new or used parts from auto parts stores, online retailers, salvage yards, or specialty shops that cater to car customizations.
Prepare the Vehicle: Park the Dodge Magnum in a suitable workspace and ensure it is securely supported. Disconnect the battery to prevent any electrical mishaps during the installation process.
Remove the Original Front End: Begin by removing the front bumper, grille, headlights, hood, and any other components that need to be replaced. Use appropriate tools to carefully detach these parts without causing damage to the vehicle.
Install the Chrysler 300 Front End Parts: Install the Chrysler 300 front end parts in place of the original Dodge Magnum components. Ensure that each part fits properly and aligns with the surrounding body panels. You may need to make minor adjustments or modifications for a perfect fit.
Wiring and Electrical Connections: Depending on the specific components being installed, you may need to make modifications to the wiring and electrical connections to accommodate the new headlights or other features. Follow any wiring diagrams or instructions provided with the parts to ensure proper installation.
Test and Adjust: Once all the new front end parts are installed, test the functionality of the headlights, turn signals, and other electrical components. Make any necessary adjustments to ensure everything is working correctly.
Final Touches: Once satisfied with the installation, reassemble any remaining trim pieces and components. Double-check all connections and fasteners to ensure they are secure.
Paint and Finish: If necessary, paint or touch up any areas that were affected by the installation process to ensure a seamless appearance.
Quality Check: Take the vehicle for a test drive to ensure that everything is functioning properly and that the new front end looks and performs as desired.
Keep in mind that custom modifications like this may have legal implications, particularly regarding vehicle registration and compliance with local laws and regulations. Be sure to research and understand any legal requirements before proceeding with the front end swap. Additionally, consider consulting with a professional automotive technician or body shop if you're unsure about any aspect of the conversion process.
Make sure you subscribe and hit the notifications button for more updates!

[@moparbro]

Hey #Mopar Fam! For more #magnummafiacanada Please click the link below & Subscribe! kzbin.info/aero/PLQiv4YLX3f2FAILGFhOLFGNJIkP5WfN4b

[@franciscoaquino1949]

you should make a video asking him, what he did to make that front end fit, what parts you need to change, how to get the headlights to work, and so on.

[@patsgarage8593]

As a 300 owner and a Magnum lover......that car is perfect!!

[@moparbro]

Yea I'm definitely impressed myself!

[@NextGenAestheticsGroup]

It is an impressive machine for sure!

[@tommyg2660]

Pat's Garage same

[@al-shedeedis.a.a6842]

What a great car i have mine 2005 within 2.7L it is the only one in baghdad iraq and i bought it before 8 years ago i have made many changes in it and its now 5.7 L Hemi

[@tumadreog7554]

That is a beautiful beautiful conversion. What the Dodge Magnum could have been.

[@moparbro]

Do you think they will ever come back out with a new version?

[@tumadreog7554]

@@moparbro not at all they have the selling points they wanted with the chargers and the different versions of the challengers. Which is sad because the Magnum is a wonderful car.

[@moparbro]

@@tumadreog7554 Agreed thats very true!

[@renelepage2078]

Cool magnum, there’s a magnum here in Essex county with a 15 front end on it

[@moparbro]

Yea I definily love the 13+ front ends on the magnums 🔥

[@tino3609]

Would you happen to have a video on how to do this swap I would love to make my magnum like this thanks

[@tino3609]

@@moparbro or would you happen to have a list what all I’ll need to do this also will the fenders needed to be molded to fit on dodge magum

[@GarethBretton]

this was super cool! really enjoyed watching, cant wait to see more from you :) keep them coming!

[@moparbro]

Thank you for watching! Much Appreciated!

[@BMan100]

...if only........if we had a Diesel version well....even though it's built here.......man you guys have meeting quite a bit at that Krispy Kreme lol. ....reminds me... fiesta's gotta go in for winter tire swap..so Friday need to make a trip over there for my mechanics... :P

[@moparbro]

I would drive a diesel Magnum, I love the jeep CRD!

[@BMan100]

@@moparbro ....diesel challenger with a 6spd....AM I BEING SACRILEGIOUS?!

[@moparbro]

@@BMan100 with propane boost? I'm in ahaha

[@BMan100]

@@moparbro *Mr Regular Car reviews Horny Groan*

[@hemi5.7villain]

Bravo 👏 Sir I'm looking to do a little customer's to a 07 Chrysler Aspen starting with the hood

[@renereyes3597]

V6 nice engine

[@DesigntoFinishCanada]

Loved filming the meet!

[@moparbro]

It was allot of fun for sure!

[@22mell01]

this is the first time I've seen a magnum with a newer 300 front in I havent seen a older 300 with a newer 300 font end yet.

[@moparbro]

Yea I definitly like the newer front end! Waiting to see one with a challenger front end 😎😎

[@22mell01]

@@moparbro I want to see 05 to 10 300 with the 2013 and up front end.

[@RougeLex]

NICE JOB!

[@moparbro]

@@RougeLex 🙌🔥

[@canada6609]

Ontario represent !!!!

[@moparbro]

Ontario Gang!

[@canada6609]

@@moparbro you guys ever come to Sudbury do a reveal first so I can make sure im there !!! My dream cars 😍😍😍😍

[@nedunonnyp704]

Hello, Please does this Gen 300 Fenders Bolt On Directly Like the 05-10 300 Fenders and Front Clip Bolt On? I Would like to Do this if it'll Fit Directly Without Much Modification Or Cutting and Stuff....

[@choirboi04]

This awesome man! Love it!

[@moparbro]

Thnx bro!

[@BarXaMFitness]

😮 these are super cool

[@moparbro]

That they are! Thnx for stopping in fitness bro!

[@christopherlrogers8514]

Do u have a video of how to make the finders work

[@moparbro]

@christopherlrogers8514 hey there I don't but I'll look into it, I know some guys who got the hood and the matching fenders all in one, then matched the door side.

[@tino3609]

That’s awesome is there a video on how to do the conversion for this

[@Rickfyoutube]

Hey there. Awesome looking cars. What’s up? I found a MM business card on my Rt a while ago.

[@h.a.dwhips4930]

🔥🔥

[@shaunv954]

What had to be done to get the 300 door panels on because I tried that and they don’t just swap over!

[@juliolane4682]

So I’ll have to buy all the fenders n they would go rite on?

[@rtd250]

Nice Vid Brah ;)

[@moparbro]

Thnx fam!

[@305chevyboysp6]

Hey did u had to do any type of cuttin da fenders or they fit right on without any cuttin?

[@moparbro]

I'll pass on the message to the owner! Thnx for commenting 😀

[@sugar69711]

Is the wing from Wings West

[@Philip9v6]

What year?

[@jggcsrt]

✊✊✊👍👍👍

[@moparbro]

Thank you for watching!

[@jggcsrt]

@@moparbro no prob...Im playing catch up with your vids....ive been slacking lately...😂😂😂

[@moparbro]

@@jggcsrt haha thnx allot Mopar fam I appreciate it allot !

[@ricoarnold7530]

I want to convert my Magnum to a 300

[@julianmartinez8983]

Anybody got this guys instagram or something

[@moparbro]

hey there, it's this guy here facebook.com/philshareyson?mibextid=ZbWKwL