Dodge Ram 1500 - BORED OUT Throttle Body - Easy Bolt on POWER

[@videokaru]

Im loveing all these videos! Sitting on silver 5.7 hemi 2017. All your truck videos are exactly how every hemi owner feels and googels about! Keep it up!

[@BoostedMotorsports]

Thanks for the support! Lots more content on the way so check back! I should have a MPG test and I am trying out some LED reverse bulbs, both videos should be out this week!

[@Mech_Warrior]

@@BoostedMotorsports love the channel had a question my mods are carven exhaust (the one you didn't like) cold air intake and a fastman 82 mm TB do I need a tune ?

[@SACTOWNOG]

What shop did this mod. What's there contact info

[@Hotrodred911]

I have a 2012 1500, and I just did the clutch fan delete then added v6 fan. I've seen a lot of positive gains from this alone. I'm very interested in getting this throttle body if you have one available.

[@TheChaddickey]

Hey do you have any more of these coming soon?

[@jrobertsz71]

I picked one of these up, installed in about five minutes. Very happy I did. Easy mod. Definite noticible change in throttle as well as more get up and go. This is the first performance mod I've done so far. Next is either the Mopar CAI with the ram air adapter or the Vararam setup. Haven't decided which yet. After that, I'll get the programmer and unlocked pcm package. Then of course shorty headers, exhaust, etc. Ha!

[@BoostedMotorsports]

Thanks Jason! Glad you are liking it! I have a few more left too 😁

[@LilApostleX]

I felt the S&B cold air is better bro..I love it on my ram

[@willtolar289]

Jason Stevens where did you pick yours up from?

[@Twsimracing]

Do you need to already have a tune in order to put a aftermarket Tb?

[@patricksnyder3446]

How much. Is it better to just buy a different throttle body?? 2017 RAM 1500 5.7 what size for a completely stock truck would be best?? how much did you bore it out?

[@ttlawncare3595]

Hi Sir if you don't mind me asking how much did that cost and wound they do it for a 2007 ram hemi

[@hectorgonzalez9636]

How can I get my tb bored like this or where can I buy one

[@patrickbrown2193]

Did you have to tune after you bolted on throttle body so you were pulling a good air fuel mixture?

[@ernestogonzalez2023]

Yeah I was watching one of ur videos and I was wondering how much for one of those $$$

[@humbertogonzalez331]

Wondering if it could be done

[@TheChaddickey]

Hey where can I get one of these if still available. Thanks

[@georgemiranda-nz2fd]

Is there a link for the bored throttle body ?

[@Keontay.slideonshii]

How do I get one I have a 2013 will it help

[@MasterPhilip616]

Great video, man! I had a 2011 Laramie quad cab I put a Moe's 87mm throttle body on, K&M cold air and a Magnaflow. Just those three things made it way more badass. I just got a 2022 Rebel and I'm planning on doing a lot more than that, to it.

[@edwardperez4972]

I am very interested I have a stock Dakota if it isn't too much I'd like some insight on this mod and what else should go with it

[@aaronakaerrn]

Definitely interested in doing this to my 11 ram 1500.

[@WHITETAIL215]

Where you getting this.done I want to do this but cant find anyone

[@mikewisdom9934]

I would like one of the bored out throttle bodies please

[@RickyLR42009]

Are you from dallas?

[@santiagogalvan5917]

Hey I want one for my truck were did you get it from and all plzzz let me know

[@josephknudsen3804]

Have you ever dynoed the truck? With the list of add-ons you have done which one do you think is the best bang for your buck?

[@BoostedMotorsports]

I haven't yet! Depending on the year of your truck, if you are 2015+ I would say intake and throttle body. Pre 2015 you can buy a hand held DiabloSport tuner and will wake the truck up a lot.

[@Bryanfrm4-0-5]

Which throttle body did you end up going with?

[@timothyallbee1176]

I’m interested in pursuing a bored out throttle body for my 2008 Dodge Ram 1500 5.7 Hemi

[@antoniodavis9848]

I enjoy watching your video's and find them very informative for ram truck owners, i watched your catch can video and ordered one right after . i would like to know what shop did you throttle body bore .....im interested in getting mine done......

[@BoostedMotorsports]

I had a few but ran out of cores as people wanted to keep their original. I may try and get more done since lots of people were happy with the result and want one.

[@stevenvillela1987]

BoostedMotorsports how much? I like to buy one

[@hwsfinnest986]

@@BoostedMotorsports I also would like to buy your custom spacer for my ram 1500

[@headlightking]

Where do I get my throttle body bored out??

[@JameyCampbell_54]

Did you use a dremmel/roto zip ? What kind of bits / cutting wheels ?

[@Tank12707]

How did that bored out throttle body cost? And who did the work?

[@wesgreen2107]

did you match the intake opening, have it made larger? you'll have turbulence

[@nickrudat4724]

How do I get my hands on the bored out throttle body? It looks like that shop did a great job. How much $$?

[@ThatGuyWhosCanaan]

Google: Fastman Throttlebody

[@villeracing5087]

Moes performance

[@watchwait7117]

Who was the shop that did this and what was the cost? If this is a cheaper option that the new TB purchase it would be worth it.

[@adamtostado79]

I like your videos man. did you had to relearn you throttle body calibrate or there's no such thing.

[@BoostedMotorsports]

Plug and play! It does seem to take a bit of driving for the computer to adjust to more airflow and feel the difference though!

[@adamtostado79]

BoostedMotorsports thanks

[@suvius4]

how much did it cost for the shop to bore out the throttle-body?

[@elgamazacatecas6670]

Stock intake.. fitt on the new tb..wat size is it .

[@hwsfinnest986]

Hey man how can I purchase your custom spacer for my ram 1500 .?

[@callme_hemifripp2574]

Are the Moe’s Performance Throttle bodies any good? What brand are you using?

[@bminus752]

Hey do have anymore of these I want one how much

[@armandotoscano4284]

what shop did your work on the TB ? I'm buying a moes performance 87mm can you give me your opinion please would help!

[@BoostedMotorsports]

Send me an email as I am not sure if the company wants their info posted here yet. The Moe's one is pretty expensive and is only ported and not bored out. [e-mail]

[@bri-manhunter2654]

On my 13 express. I already had long tubes, y pipe, cat delete, supper 44 muffler, resonator delete, intake, and dyno tune. I just added the new throttle body. No dyno test yet on the new moes 87mm throttle body, but I think it may added a little. However, I believe I am losing out on a lot of bottom end torque from the cat delete and the primaries on the long tubes being 1 &7/8( to big for natural aspirated), I have a Magnaflow high flow car I will be adding next week. I am hoping to get my torque back!

[@anthonyvanwinkle7539]

Where'd you get this?? Have a 12 I'm trying to buy one

[@seangreenwell2635]

How would you compare it to pedal commander though for throttle response? Which did you like better? Would you ever do both or think about it?

[@BoostedMotorsports]

I haven't run a pedal commander but can fully adjust my throttle sensitivity with HP Tuners 😎

[@noeamaro4526]

Hi, I have a Ram 2010 and i want to clean the TB, but i heard that if you move the flap, the TB is decalibrated, and it is necessary to reprogram it, is it true?

[@BoostedMotorsports]

Take the tb it off and clean it. you'll be fine moving it around with it off the vehicle it wont hurt anything.

[@robdemers9303]

always interesting.i have the ram 1500 single cab short box that i am sporting out.was thinking of a throttle body spacer.this may be a better way to go.or should i get a bored out throttle body along with a spacer.boring out the spacer will effect the spiral air flow or does someone make a bored out spacer

[@BoostedMotorsports]

Go with a larger bore. The spacers were early 2000s snake oil products that there are a ton of debates on forums about. The tb actually works 👍

[@dev4statingx90]

Did you tune the computer to compensate for the change? If not, than this is useless.

[@russzufelt1042]

John, what about MPG since the new bored out TB? More horse power is great, but at what cost at the pump? If you've noticed a decrease in MPG at your current tune settings, are you able to tweak your tune to increase MPG? Thanks again for the informative vid.

[@BoostedMotorsports]

Hey Russ! Thanks for the support! I've been doing mostly city driving since throwing this on so haven't been driving in MPG friendly conditions to be honest. Lots of 5-10minute trips etc. I don't think it has changed too much on the dash as far as the MPG reading. At the same time though it is hard for me to give you guys MPG comparison with these wheels cause I definitely lost at least 2mpg putting these big wheels on. My opinion is with all the mods I did I was better than stock MPG and with these wheels my MPG is sitting back right around stock again. Let me know if you have any other questions and I'll be sure to get back to them

[@gaardendan]

It's been 7 more months....any more input on fuel eco from the TB? You had something created...we all wanna know how it actually works. lol

[@catarinavillarreal3981]

where and how much to get my current one bored out

[@justin5942]

i have watched the exhaust , fan,throttle body and tuner vids.i would like to know the hp gain with all combined. im looking at getting the carvan ,i don't mind the noise. and looking for other bugget mods due to having a jeep fetish as well lol.

[@BoostedMotorsports]

I have a dyno vid buried here on the channel! It picked up a decent amount of power on a canned tune

[@brayanvazquez7857]

Where did you get this done at

[@goodinsrt8]

Dyno tuning with a K&N sticker is worth 15 whp, so I'd hope dyno tuning with a throttle body would at least do the same.

[@Wannna_bet]

im intereseted in getting one of these this summer

[@BoostedMotorsports]

Let me know Joe! I still have a few!

[@Wannna_bet]

BoostedMotorsports sent you a message threw instagram

[@edgarmendieta4148]

Really want to get one do you know of any place I could find one done right like yours? Do you have any available?

[@BoostedMotorsports]

[e-mail]

[@adolfogonzalez3930]

Are they available

[@DragonKnighte2798]

what were your fuel trims after throttle body mod?

[@dantheman3426]

Was it worth it to bore it out? Thinking about doing mine but I have a pedal commander so throttle response is instant. I’m pressed between a diablo tuner/pcm swap or throttle body. Already have v6 fan swap, catch can, Intake, mufflex straight pipe, 2/4 drop, 180 thermostat and 285/50/20 toyos. Need advice about to pull the trigger on one of them.

[@BoostedMotorsports]

If you already have that whole list I would definitely say you need the tuner at this point lol. More importantly though if you need the PCM swap you have a 2015+ and the trans tuning for the 8spd is insane. Makes these things fast as hell!

[@williamspence475]

Are these still available

[@DragonKnighte2798]

whats the specs for the bore out?

[@sunshinesallday]

Nice upgrade

[@adams6223]

Any chance you have one of these left, John?

[@kennethshoemaker2941]

Information on this what's the name of the company

[@prestonreeves4143]

I want that throttle body how do I buy one?

[@OnlyPetsChannel]

Hey bro i have been looking at your videos and there are great .? I would like to do this mod but unplugging the truck throttle body does not affect the signal between the pedal and the throttle body ?also how much this mod cost ?cuzI was thinking on buying a separated throttle body and installed leaving mine stock i have a Ram1500 crew cab 4x4 short box.

[@BoostedMotorsports]

Hey Johnathan you won't have any issues running it on your truck! For more info send an email to [e-mail]

[@joegrijalva1516]

How much for a throttle body?

[@MrMannymcfly7]

You have more?

[@jimhuggins5783]

What brand did you use?

[@kevinmckinney7841]

You should dyno before and after to get any real results. 20rwhp from just a throttle body change sounds dubious. I had to go cam and heads with a Diablo tune to have any gains like that.

[@bri-manhunter2654]

Kevin McKinney, long tunes will get you there.

[@brandondimmitt8467]

What does the throttle body run?? Price wise.

[@donaldliverance2597]

Amazon has a 90mm for like 300 you could slide that over this bored out one hellcat has a 92mm for an idea stock the 5.7 is 80mm I think so either way you can't bore it out far enough to beat the 90 and it'll be cheaper in the long run

[@MoparHollics]

Great videos bud 👍 nicely explained and very detailed I've got a 2013 express it's still a working progress I'm modifying it little by little. It's like you mentioned in the other video trying to modify on a budget

[@BoostedMotorsports]

Awesome thanks for the support! More content on the way for sure!!!

[@bri-manhunter2654]

BoostedMotorsports, hey man, quick question. What kind of power did you get from the throttle body, here is what I have? On my 13 express. I already had JBA long tubes, y pipe, cat delete, , supper 44 muffler, resonator delete, intake, catch can and dyno tune. I just added the new throttle body. No dyno test yet on the new moes 87mm throttle body, but I think it may added a little. However, I believe I am losing out on a lot of bottom end torque from the cat delete and the primaries on the long tubes being 1 &7/8( to big for natural aspirated and They are Jba longtubes), I have a Magnaflow high flow cat I will be adding next week. I am hoping to get my torque back! Another quick question, did you have your throttle body reflashed? Reason why I bought my new Moes 87mm throttle body was the dealer told me my other one was shot. After starting off normal with the new oneand idling low again for 10min my truck kicked up the RPMs and now it's idleling 1 & 1/2 thousand RPMs like with the old one, I'm really hoping when I get back to the dealership and they try to reflash it this one will work unlike the original one. Did you get yours dealer reflashed? I don't have a tuner, I had my truck previously dyno tuned.

[@justmowed]

Do you have a throttle body spacer?

[@BoostedMotorsports]

No sir! There is a ton of info out there about them not being worth the $

[@marcoferreira226]

I'm curious about the tunner whats the canned 91 tune like is it worth the money?

[@BoostedMotorsports]

Hey Marco, the canned 91 tune is noticeable but more than anything adjusting the throttle booster makes the gas pedal respond how it should for a 390hp truck from the factory. I got my tuner for $160 second hand so for me it was worth it but I don't know if I would be fully satisfied paying $400 or whatever it is to buy new these days. Definitely noticeable but in my honest opinion it wont make your truck ridiculously fast or anything like that. You can also pay for a custom tune from hemifever or Jay Greene which I heard is very noticeable but I haven't tried that yet! Any other questions let me know!

[@bobbyb608]

Boosted2k i used to run a 93 canned, then just switched to jay greene 93 and trans tune and it’s a whole new beast

[@southtexasmedic]

Im running the 93 tune with the 20% adjust throttle responce i love diffenanlty worth the money....

[@BoostedMotorsports]

Christmas Gummyworm I'm jealous! Diablosport still hasn't released the damn 8spd trans tuning for 2014 😡

[@southtexasmedic]

Boosted2k hemifever has a zf8 transmission tune

[@fabianpalma2274]

Where can I buy one

[@sharktale207]

Where can I get this ?

[@tayninh69]

Good video, I like your videos because you are honest. Keep up the good work.

[@gilhernandez605]

How do I get one or where do I send mine to????

[@BoostedMotorsports]

[e-mail]

[@charlieryan1736]

That New throttle body looks great, do you think you would want to do it on the Viper? Thanks for another great video

[@BoostedMotorsports]

Thanks Charlie! I haven't really been focusing on the Viper much lately. I like to help people and make videos that people enjoy and the Viper is terrible for that. If you check out the Viper content those videos were very time consuming for me to make and barely have any views even that have been posted for a year now. This RAM stuff is fun because I get to try mods and products that are much less expensive than the Viper and there seems to be more people interested in this stuff. Let me know what you think though!

[@charlieryan1736]

Boosted2k I agree with you. The Viper community is so small. Good luck I always like your videos

[@saleens330]

Looks really nice. But I don’t think I’ve seen legit dyno numbers of a TB ported or aftermarket make that much HP. But I port too and will do this to mine. I won’t pay that much to squeeze out 5rwhp but I will for free.

[@BoostedMotorsports]

Well theres definitely a difference between ported and bored out with a larger plate. These are bored right through with a larger plate installed while most are just ported before or after the stock diameter plate which doesn't help with the bottleneck 😎

[@oldskool83]

Can you list how much the shop charged? or msg me on where or who to contact. I'm starting to collect parts to rebuild my 04 ram

[@EatUpBoise]

I saw you just had some more made. How do I order?

[@BoostedMotorsports]

[e-mail]

[@Alpha2SS]

Any surging issues whatsoever?

[@BoostedMotorsports]

Nope no issues!

[@Alpha2SS]

BoostedMotorsports did you have to recalibrate the throttle body?

[@hemilife2120]

Where did you get it done at ?

[@shawne7228]

Fastman throttle body out of Little Canada Minnesota

[@rufolujan-espinosa6454]

Bro!! Where can I get this TB for my RAM? Ive been following all your videos and have done everything but the SC. I feel this is all I need for my daily and I'll be happy(for now) . Thanks in advanced

[@SmudgyContent]

Fastman dan makes them he will knock $100 off when u ship ur stock one back to him... but youre looking at $400 for the drive by wire kind

[@mikespratt8350]

You do good videos and i have been taking your advice on all on my bolt ons. They have all help in MPG and HP. My question is which is better 85mm or the 90mm throttle body?

[@kenaj6821]

Go with 87mm because 90mm tb tends to mess up the air flow. I recently installed an 87mm and can tell the difference without a tune.

[@elgamazacatecas6670]

U think 85 TB from moes performance is good

[@BoostedMotorsports]

We sell these throttle bodies if you want one. Send a message on Instagram or facebook

[@tump1966able]

How can I get one of those

[@BoostedMotorsports]

[e-mail] 👍

[@tump1966able]

BoostedMotorsports88@gmail .com

[@DuhByrd]

Hey man who did your throttle body for you

[@BoostedMotorsports]

I have a few of these shoot me an email [e-mail]

[@DuhByrd]

Boosted2k i tried to it said your email isnt valid :/

[@BoostedMotorsports]

Hey sorry brad forgot to include 88 at the end lol. [e-mail]

[@pimpn5678]

I would like to purchase your throttle body that I just watched on your KZbin channel. Can you please get back to me if you have any more left. And the cost of the item and shipping thx. Rick Garcia

[@Lillyanna718]

could I order one from you?

[@hankclingingsmith8707]

HOW COME YOU DO NOT ANSWER RELEVANT QUESTIONS TO YOUR VIDEOS. ???

[@rickydakin6148]

Well Im pretty sure if he could answer the good reply's he could answer a few questions

[@michaelfanninjr2680]

How much

[@bigfly_214]

would you put a throttle body spacer with that or would it actually fit

[@BoostedMotorsports]

There is a bunch of controversy over the throttle body spacer not doing much so I haven't bothered!

[@thejackofalltrades2692]

Spacers are straight up junk...

[@humbertogonzalez331]

I have a 4.7 v8 08 Durango

[@Amputee4life628]

How much for the upgrade?

[@kenaj6821]

It’s around 300$ at moes.com

[@jb3173]

BBK 499 for 90mm

[@JOEBOWERS7]

I really enjoy your videos ! Thank you for helping with awesome mods on the ram, Keep up the great videos.

[@BoostedMotorsports]

BRONCOHOLIC AZ thanks for your support! Lots more content on the way and I'm committed to having a new video posted every other day so check back 👍

[@khyoon14]

How are you going to advertise it and not tell us where to buy it

[@mattowens2830]

Some of them dont bore it out all the way because they're trying to achieve air velocity which has a slight supercharging effect.

[@Nathan-wn5mc]

I wonder how much you payed for this extra 2 - 5 hp.

[@twotimes2099]

Nate V exactly

[@kenaj6821]

It costs around 300$ at moes.com

[@TacticalLego]

I need one

[@BoostedMotorsports]

Send me an email at [e-mail]

[@glennoldham9776]

I would like to get in touch with you about this can you send me your contact info please. I also live in the south and would like to know about some other videos you posted, oh by the way great videos each and every time thanks.

[@BoostedMotorsports]

Sure Glenn send me an email [e-mail]

[@eshauncohn4278]

Hi Boosted2k how can I get in contact with TB guy

[@joshuranga5058]

Do you have any left for sale? lol

[@moparenthusiast2046]

Changing TB to bored one will give you nothing.

[@Mike-le1jn]

Fully agree... noticable hp gains come from heads, cam, ect...5 mil bigger tb is a joke