Nippon Modus3 Tour 105 in all my irons and wedges. Fitted for them at Tour X. They also felt the best out of all the shafts that I tried. Love em.
@bnzstheboy65203 жыл бұрын
Would have been nice, if you tell what FLEX your were using
@KieronShea6 жыл бұрын
I swing a 7 iron at 90-93mph recently fitted for S300’s I can play X100 but just feel over 18 or 36 holes repeatedly playing shots S300’s worked better for me and can swing more consistently and control my swing more. Great video as well 👌🏻
@JamesRobinsonGolf6 жыл бұрын
Thanks Kieron!
@vasiliyzorin6 жыл бұрын
X100 AMT. Love the weight differential through the bag
@jackvanderpool34175 жыл бұрын
Nice job, it doesnt take 20 minutes like other videos. Like to see for us older guys who've always played stiff shafts. 300 vs R shaft.Thanks, enjoy your stuff. CHEERS!
@yossoufzai6 жыл бұрын
Project X Rifles 6.0. I was fitted for them when I bought my Mizuno MP-5. I just trusted the fitter and I must say that years later with these irons, I still thank him for the wonderful results I get from my irons ...
@Bob-nu3xe2 жыл бұрын
play with s300 for last 15 years Callaway x18s 70 years young, shot gross 71 and 72 recently love em!
@kevutton4 жыл бұрын
I was hitting R300 with crazy high spin rates, so got a fitting recently and the numbers pointed me towards P790 with X100 shafts. I can now control the flight so much better and have picked up a good club and half to two clubs distance throughout the iron bag. I would never never have dreamt of hitting this shaft without a numbers fitting, but 6 rounds in, I absolutely love them.
@stevef40102 жыл бұрын
I'm playing R300 too. I hit the ball too high often. I'm scratch, but feel I should try X100 and maybe blades. I wants smaller faces. Do they feel "boardy" or just close to S300?
@garycumberland80896 жыл бұрын
James, When I returned to golf the golf shop suggested irons with Matrix graphite shafts 65gm, regular. However much I tried I couldn't get along with them and was beginning to think about giving up altogether when someone suggested a club fitter in my area. The result having tried a lot of shafts and heads was a Steel Nippon Zelos 7 Stiff from 5 to PW with Zelos 8 in my 4 iron and Wedges. I am far from perfect but a lot better than I was, the rest can hopefully be solved by lessons. My advice to the older golfer is don't be afraid of a steel shaft or a stiff steel shaft, its about balance and control for me and I can feel where the club head is now, such a relief.
@haltoi015 жыл бұрын
Gary Cumberland ==
@Ader03A6 жыл бұрын
Currently playing X100 AMT, like the stability in the lower irons where with the longer irons I can focus on making good ball contact with a smoother swing. Was fitted, 7 iron 7300 spin and 50 degree landing angle.
@robertrobinson11355 жыл бұрын
I went from a Uni-flex shaft on my old irons ('06 Big Bertha) to Project X 6.0 (X-Forged '18). And it has been remarkable how much of a positive difference it has made to my game! Consistency, feedback and feel! I should also add that I swing my 7 iron at an average of 102mph.
@johnmagnell89025 жыл бұрын
Wow. 7iron average 102... you’re BK ?
@brotherbread654911 ай бұрын
I play Px 6.0, have 95mph swing speed with 7i, Callaway 2009 x forged and they balloon sooooo bad. I can't wait to change them out. Can't imagine how they act for you at 102mph.
@MPlattsjr6 жыл бұрын
I was fitted with the Nippon Modus 3 Tour 105 shafts at Mizuno Atlanta, Ga using Swing DNA. Even across the three suggested shafts the x-stiff Modus tightened the dispersion noticeably.
@Lion_lamb5 жыл бұрын
Murray Platts How far do you hit you driver? And do you compress the ball well with irons?
@adrianadams62376 жыл бұрын
I got Fitted for the c taper x 130 in 718 ap2 used to play 710 ap2 s rifle 7.0 find now my dispersion has tightened as I have been able to take some spin off . I now swing less aggressively now due to the balance of the c taper shafts . Really love the look of the satin finish too . Enjoyed your vid once again 👍🙂
@BrianSWG4 жыл бұрын
I think tempo and feel are important factors. I have the swing speed and distance for X shafts but I play a mix of R300s and S300. I have a very slow take away (think of a Matsuyana or Freddy swing) and prefer the feel of the club lag for me. Shafts really are a preference so try them before you buy if you can! And some Tour Pros play regular shafts so its all up to what works for you!
@c34laurel6 жыл бұрын
Project X 6.0. Sleek straight shaft and the balance on my Taylormade MB tour preferred irons are on point.
@richardsdiaz16 жыл бұрын
I always used Dynamic Gold S300 shafts until recently. I've been in the gym regularly for almost 3 years now and as a result I've been fitted into X-Flex shafts across the board. My shafts now are X Flex KBS Tour 130 (1x soft stepped)! So they aren't true X Flex but.....almost!
@JamesRobinsonGolf6 жыл бұрын
Nice!!!
@jumbroni60143 жыл бұрын
I have the S300 and they're extremely consistent.
@BeachBow6 жыл бұрын
I"d always used stiff graphite shafts in my irons, but the latest set I chose because of $$$ and they had regular shafts. Took a little getting used to, but I can make the ball do almost anything I want it to. As you say, it all comes down to feel. JM2C
@locobenno94356 жыл бұрын
I gamed S300s my whole life until I went for a Mizuno fitting last year with their swing DNA, they put me in the AMTX100 and straight away my issue with going left almost disappeared; my miss has gone from a snappy hook to a block and I'm happy to live with that, although my stock shot has progressed from a baby draw to straight-ish which has taken me longer to get used to, and I thought I'd lose some feel with an X but I can play all my feel shots without issue. Stoked I got fitted and made the change, 30 years of working it out myself was sorted in 30 minutes
@LTZ_Z712 жыл бұрын
Great video as always. I play Modus 120 X-stiff in my irons and absolutely love them!
@alanwaterworth64646 жыл бұрын
Interesting test. I have S300 shafts in one set, and X100 rifle shafts in another set (AP2s) I accidentally bent the shaft in the 7 iron in the rifle shafted AP2s but I´ve never really liked those anyway as the swing weight felt heavier. Putting a S300 in the AP2 7 iron made it feel much more playable as they seem to give me a higher launch. That might be just me that´s used to them but they definitely feel better to me.
@VonikGames6 жыл бұрын
I’d love to see a video on how to read greens properly as I seem to struggle with that!
@JamesRobinsonGolf6 жыл бұрын
Have you tried Aimpoint mate
@VonikGames6 жыл бұрын
James Robinson Golf I’ve been trying aimpoint and have been holing so many putts thanks James!!
@michaelpotts57706 жыл бұрын
Just ordered JPX 919 Forged with Nippon NS PRO modus 3 120g X flex shafts in! Was fitted at tour X golf by nick hibbs unbelievable experience and would recommend him to anyone!!!
@kenmack51796 жыл бұрын
I play kbs tour in my irons at x flex. They are plus 1 1/2 inches above standard ,so they probably play a little softer. I was fitted for these shafts and I love the feel of them
@jeanferret94976 жыл бұрын
PX 5.5. Great from 7 down. A bit hard work in 4-6. Will demo Modus 105, DG 105 and KBS Tour in regular for 2019s weapons.
@delacruzC5D6 жыл бұрын
I just got fitted for a set of irons this year (Mizuno MP-18 MMC). I used Mizuno's swing DNA shaft fitting device to get fit. I was using TT XP115 S300, and just lost the feel for the shaft. I don't hit really far, between 150 - 160 yard carry for a 7 iron. I was expecting to get fit into a Project Rifle, which is a shaft I had used in the past. To my surprise, I was fit for a NS Modus 3 105 in X. I was told it was because of my load characteristics, not the swing speed as to why the X was suggested. I tried the Modus 3 105 in both S and X flex for the next hour. I was bit more consistent with the X, but it felt boardy and my miss was right. The S had more "flex flow", but my miss was more left...which I hate. I settled for a hard stepped S. Really like the shaft decision. Go get fit...you never know what you'll find.
@paulshirley60006 жыл бұрын
Currently using the original rifle 6.0 flighted shafts in my MP32 irons and I’m about too update them to the project X 6.0 in the next week or so
@robertakerson71865 жыл бұрын
Mr. Robinson- Interesting evaluation. A suggestion might be to test the extra-stiff shaft vs. a "Senior Flex" to emphasize any differences. Thanks, Bob
@mattjubb59526 жыл бұрын
Another great informative vlog pal . Keep up the great work . Won’t be long now before I book in for a lesson 🤪😁
@svenhallauer32296 жыл бұрын
I got fitted for a KBS C-Taper S that's being hard-stepped. Reason being that I prefer the feel of a stiffer than stiff shaft, but with most models that means an increase in weight. This way, I get a stiffer shaft with the same weight - brilliant. Go get fitted!
@jeremywiltshire335 жыл бұрын
I have used s300 and then I made a switch to the lz shafts 6.0. I did try the x100 in 718mb irons at a demo day. I have to say I prefer the feel of the x100 I said to the fitter that I felt more insync with my self and felt a lot better with the quality of my swing. So if I did a blind test I would say x100 all day for my self but to me for fitting it’s all about players feel. Not so much for numbers. If you have a half decent player and willing to work on your swing then a good golf coach is all you need to fix your numbers.
@steverager56026 жыл бұрын
Just bought the ap3's with the project x lz xtra stiff 120g. Love them. I hit so much better. Great videos bro
@coreycrawford82224 жыл бұрын
Getting fitted tomorrow and this really helped!!
@KentnDebi6 жыл бұрын
What's written on the shaft makes no difference. It's one of the biggest annoyances in golf...there's no standard for shaft flex. It would be much better if all the manufacturers got together and agreed to use CPM rather than A, R, S and XS as a desegregation of flex. Nice video again James.
@JamesRobinsonGolf6 жыл бұрын
Cheers Kent! :)
@KentnDebi6 жыл бұрын
@Huw chardon Agreed 100% there. It really needs to be some sort of standard for the shaft manufacturers to work to...there is so much technology and R&D goes into producing shafts they need to give us, as their customers, some form of standard they'll all work to it'll help us all out
@KentnDebi6 жыл бұрын
@Huw chardon I just remembered a video Ive watched from Mike at Golfholics. They go to Fujikura in San Diego for a driver shaft fitting. Great video for the golf geek that likes to see how shafts are made, measured and even assessed against models from other companies...give it a 'coat of looking at' here kzbin.info/www/bejne/iYOXaYGbrZ52g68 hopefully the link works for you!
@malcolmroden83696 жыл бұрын
Loving your videos, I play senior graphite, only because of Arthritis, was regular steel, now I just don’t the distance using steel and regular, apart from on a JPX900 demo 6 iron, it felt good ( can’t remember shaft weight), next year JPX919 with graphite senior not because I have to, because I want to 👍🏽
@kurir956 жыл бұрын
Played them both... S300 AMT now
@JonathanMoosey3 жыл бұрын
Just reshafted my Mizuno MP-67 musclebacks with Dynamic Gold Tour Issue X100 from the stock Dynamic Gold S300 shafts. If you’re gonna go Dynamic Gold X100, you may as well go Tour Issue if you have the money to do so.
@russgreen676 жыл бұрын
Using KBS Tour 120 stiff in the Apex pro. Previously used project X 6.0 in last set but found the KBS to be a little less harsh and more responsive especially when not swinging my best. They also performed best during the fitting. Great video once again.
@markhuru Жыл бұрын
Wild looking swing set club super early with a bit of twist on take off
@Ackermannized5 жыл бұрын
I’ve had both, prefer the tighter dispersion of the x100, but I find I have to work really hard to move the ball sideways, when you do though, you can trust it won’t go too far.
@thewayneschannel13 жыл бұрын
Thank you very much.
@SolomonLi6 жыл бұрын
I'm rocking D300S right now... partly because I got them in the set (used)... partly because they feel right... and I haven't bothered with X-stiff yet.
@robertquilty84376 жыл бұрын
Hi James i am enjoying your content testing different clubs and brands keep it up. NS PRO Modus Tour 120S with Srixon 765 head regards Rob Canberra Australia
@davidbarnard58733 жыл бұрын
Used same irons for 10 years, Titleist ap2 1st version from 2010, got project X 5.5, swing the driver around 100mph so borderline for 5.5's but I like to fade them so went with those
@jxrd98156 жыл бұрын
I found this to br very interesting how ever i would be keen to see some putting videos tips and techniques good vid mate
@JamesRobinsonGolf6 жыл бұрын
Cheers mate. Noted
@tonywestwell6 жыл бұрын
Using KBS tour regular as far as I know they came like that off the shelf. I bought them sight unseen feel awesome go awesome wouldn't swap them.
@PhiLiM75 жыл бұрын
Can you do a project x lz 6.0 vs dg s300 or lz 6.5 vs x100 shaft comparison?
@awp76626 жыл бұрын
I have x stiff in driver and 3 wood. DG S300 in my irons and has been for 20 years or so. I tried 6.5 rifle shafts but much prefer the feel and feedback of the S300. Another cool video James, have you done vokeys vs hi toe wedges? Would be interested as I'm thinking seriously about getting some hi toe. Cheers👍🏼
@njw47995 жыл бұрын
use the same shafts in my ap3's. Best shafts I have ever used.
@ReedServices6 жыл бұрын
KBS Tour 90 Regular. I like the lighter feel and kick.
@JamesRobinsonGolf6 жыл бұрын
Nice Brent! Good man
@mrdudelove16 жыл бұрын
Brent Reed Same as me...i dont swing hard on iron shot...but everything else is xstiff......am i weird?
@gssheriff72786 жыл бұрын
Shafts make all the difference and getting the flex correct is the most important one. When I was in my mid to early thirties I played steel rifle shafts. They were firm but not stiff. Then went to regular as the shafts have green stiffer over the years. I now play graphite regulars shafts in my cobra King cobra F8 irons. Still trying to get used to the feel. They feel lighter than steel.
@ryanfagan85035 жыл бұрын
That’s a really steep and aggressive take away. You really get down and through it beautifully though. That’s some green holding trajectory for sure. I struggle with a flat takeaway and lower trajectory. That move you do with your hands to queue the takeaway, really sets you on a steeper angle going back. Might have to try something similar to create that feel.
@ScratchArkkitehti6 жыл бұрын
Its about feel....heck Justin Thomas hit a 300 yard 3 wood in a stiff last year at the UsOPen.
@christopherpatterson4851 Жыл бұрын
I'd love to see a head to head with some old school shafts like the ping zz lite with new shafts
@kevinshiel34396 жыл бұрын
got fit for srixon z765s with dynamic gold S300s - feels great.
@poseman136 жыл бұрын
fitted irons with regular shafts, actually had trouble hitting with them. used a friends irons with stiff shafts and hit the ball better.
@garyschwilling48366 жыл бұрын
I would like to try the extra stiff shafts. Getting fitted soon and will look into it.
@Morne77Pablo6 жыл бұрын
Fitted for the kbs c taper 130x. Nice when you have the confidence to play either a cut or slight draw when the shot calls for it.
@wallstreetoneil5 жыл бұрын
If you play for fun, and are running out of the car to the first tee, or can't hit 60 balls on the range before each round starts, then DG 120 S300 all day long - that was the recommended fitted shaft by the computer on my new Mizuno Hot Metal Pros and that's what I went with - it's stiff enough and I carry my 5 iron 197yards at a weakened 24 degrees loft. If I was competing, and had time to warm up before each round, there isn't even a question, X shafts all day long. Why? - because they 100% are more controllable reducing excessive curvature and they are more consistent front to back yardage wise. My older clubs are Original Generation Titleist AP2s with Project X 6.5s (I really love that shaft). I never felt that shaft was stiff - it just works. What it does do is give me an exact repeatable carry distance on my irons - but that combo isn't long - but it is 100% repeatable. If money isn't an issue, I would actually encourage most people to go with new 'player' quality graphite shafts.
@no9scrum6 жыл бұрын
i'd like to see you do this with all kinds of shafts... so you just hit a 7 iron with xstiff, stiff, normal, and then the senior or something... to see what the actual difference is across more than 2 variations
@JamesRobinsonGolf6 жыл бұрын
I’ve done it with driver mate. 👍🏼🔥
@Michaelsjpx5 жыл бұрын
nice video James .....fitted for my irons have DG s 300
@charliearmstrong79016 жыл бұрын
Excellent informative video again!
@JamesRobinsonGolf6 жыл бұрын
Thanks Charlie! :)
@myopenmind5276 жыл бұрын
KBS C TAPER for me. Feel great, look great too.
@JamesRobinsonGolf6 жыл бұрын
I used them for a spell. Love the finish!
@cwugrad3966 жыл бұрын
Interesting they are the same weight. Usually the x is heavier than the s which is where I would notice the difference
@erichurt98846 жыл бұрын
This has been by far my enemy this year. Was fitted for a S300 then found out a c taper then I go to another person and they said I should use a Project X 6.5. I just got them in so I will see how that goes. Fitters can’t always be right but maybe the 3rd one can 😁🏌️
@jsleator6276 жыл бұрын
Playing kbs tour stiff flex in titleist ap2s Great vid James 👍🏻
@mrdudelove16 жыл бұрын
With that strong swing you should always have xstiff in every clubs of your bag
@darrellburnside30145 жыл бұрын
Thanks for this James. I've always wondered. Could you try a regular shaft comparison?
@geordietoonforlife.11556 жыл бұрын
X100 more consistent and a much higher spin rate for going into greens ok maybe not for links golf but overall on that swing today maybe you should consider x100 for a trial period could be the answer! Very enjoyable video James. Got to go so let’s do it now👍😂
@JamesRobinsonGolf6 жыл бұрын
Hahahaha cheers Geordie!!!
@geordietoonforlife.11556 жыл бұрын
James Robinson Golf Are you playing west lancs with Liam next month? Hopefully I’ll make it and I’ll introduce myself if your there as I really enjoy your videos and I know it’s very time consuming.
@JamesRobinsonGolf6 жыл бұрын
Geordie Sancaster I don’t think I am mate to be fair. I’ll message him
@geordietoonforlife.11556 жыл бұрын
James Robinson Golf no problem James hopefully meet up next year.
@geordietoonforlife.11556 жыл бұрын
James Robinson Golf forgot to mention James I had a hole in one in Saturdays comp shame I didn’t play well other than that, 151 yards 14th hole at Northumberland GC received a email off HowDidiDo.com saying I’ll receive a boss watch for my achievement once it’s confirmed by the club. That’s number 3 for me but I had to wait about 35 years for the first one! Just thought I’d mention it, how many have you had off the back tees? But your just a young lad interested to know tho just out of interest. Cheers mate.
@jdard53085 ай бұрын
I know this video has some age but unless I'm mistaken there is no stiffness standard across shaft manufacturers. If you select KBS / X it will play differently than a TT / X shaft. Give me your thoughts.
@LivingOverPar5 жыл бұрын
Wow, I wish I could try the X100's in my clubs. I have the S300's and I get a lot of differences in distances.
@maxwellhowell5 жыл бұрын
I always fade the ball with s300 shafts. . . X100 shafts. I dont.... I like the consistency of the stiffer shaft. Throughout the set. I played s400 shafts for a long time. Those were damn good. I want to try the x7 series shafts. Havent had my swing speed tested in 10 years. But I'm sure it's still a good bit above 100
@arnovda94796 жыл бұрын
S300 stock shaft. Does the trick for me.
@JamesRobinsonGolf6 жыл бұрын
🤙🏼🤙🏼🤙🏼
@graemeday41956 жыл бұрын
Just ordered my new ping i500's with the dynamic gold 105 95gram r300....just felt better to me and my club pro agreed
@JamesRobinsonGolf6 жыл бұрын
Good work Graeme!
@graemeday41956 жыл бұрын
@@JamesRobinsonGolf thanks mate, they just felt better than the hot metal and the forged, although nice to hit, were 10 yards down and my dispersion was better with the pings
@graemeday41956 жыл бұрын
@Huw chardon great choice dude...loved the feel, sound and performance. I wasn't after extra yardage, as with my back i can't swing fast, but I have gained 10 yards over my steelhead xr's and my dispersion is so much tighter. Good luck with the new bats
@spencerpoweraddictedtogolf71896 жыл бұрын
James in a cap 🧢 😂. I could play x flex through the whole of my bag and I don’t because I hate the feel of x flex so I play a kbs c tapper lite in my irons and ping tour S in my woods and love them and have seen no performance difference at all but I do believe in custom fitting
@JamesRobinsonGolf6 жыл бұрын
Like it mate? Haha
@jasonsuter136 жыл бұрын
Ping i200 in awt progressive stiff shaft there nice.think they get a little more forgiving in the lower clubs
@tommiethatcher72656 жыл бұрын
Using modus stiff shaft which I was fitted for 4yrs ago and still loving them
@JamesRobinsonGolf6 жыл бұрын
Nice TT! Thanks for watching mate
@tommiethatcher72656 жыл бұрын
James Robinson Golf never miss one mate,love them 👏👏
@Justwanthavefun_1006 жыл бұрын
I’m using KBS $-Taper is between X100 vs S300
@TXGrackle5 жыл бұрын
Recently I was fitted for my current irons, (Touredge HL3) and was recommended KBS Tour 90 in stiff. Now I just need to see if they compare to my current Wilson Ultra BLK uniflex shaft. Still new to the game.
@craigvn16 жыл бұрын
Fitted for Nippon Modus 3 Tour 105 X.
@neilgardner57596 жыл бұрын
KBS C taper lite 110 in S flex; however think that a Nippon GSH950 Staff or graphite is better suited to me as hit my Yonex's better than current Srixons.
@raginasianinvasion6 жыл бұрын
As always, excellent video. Just keeps getting better and better. Please please please review the new Srixon range, if I need to, I will mail you the 5 iron and 7 iron out of my 585/785 combo set lol I promise you will fall in love with the 7 series. Played Mizuno all my life and these Srixon’s are just superior to everything out there in the market right now, think MP line mixed with a touch of Miura.
@11golfnut116 жыл бұрын
I normally play a seniors or a regular flex shaft, depending on the outside temp and how the old bones feel that day. I tried a x-stiff graphite shaft I put in a 4i. HAHA felt and looked like I was using a pool que.
@2tonecrombie6 жыл бұрын
Callaway rogue x xp 105 stepless s300 great shaft had kbs 120g on my taylormades tour preferred mc’s can feel the difference in weight between them.lighter shaft suits me better 47 now need all the help i can get play off 7.
@markblowers83874 жыл бұрын
Oban CT 100 in R+ but looking at getting the DG 120 S300 put in my irons
@juleshughes78416 жыл бұрын
great vlog as always well done buddie .....
@richardblayney18786 жыл бұрын
My Callaway xr pro irons came with stiff shafts, i feel I've gained distance compared with reg 🏌️♂️
@akselnielsen42316 жыл бұрын
Can you do a video on shaft weight ? Ive been getting lessons trewout the summer this year, because my swing went to complete junk. Went from 90-91 6 iron speed, to could hardly get the ball airborn and sub 80 swing with a 6 iron. It was getting so bad i thought about just quitting golf. Went to a new trainer, and we have slowly been getting my swing back together over the summer. Then a few days ago i went for another lesson, and i had started to battle with huge over draws, and my trainer couldnt figure out why, because i was putting good swings on the balls, and the numbers where decent, but my swing speed had increased, since the last time i went for a lesson. 88 ish with a 6 iron now. So he looked closly at the recording and asked me to hit some balls with a 919 tour and didnt say anything about what shaft he gave me. I started hitting small draws again. He said he gave me a dynamic gold x-stiff 125gram shaft and my own shaft is a nippon 950gh wich is sub 100grams i belive Honestly i couldnt feel the difference in flex, but it was pretty clear, when watching the recordings, that my own shaft was bending alot, but the weight difference felt much much nicer. Didnt feel like i had to force the swing, and i didnt loose any swing speed, even though there was a good 30 gram difference in the shafts. That really opened my eyes, since i couldnt tell the difference in flex, but the weight made a huge difference ! And the heavier shafts gave me a much nicer tempo in the swing You can probely get used to anything, because you start to do things in your swing, if the shaft doesnt fit you to compensate ( weight wise, still not sold on the flex thing ) Sorry for the loooong ramble, but a video on shaft weight would be more interresting, then flex !
@57Jimflynn6 жыл бұрын
I run stiff up to 4 iron and x stiff in my 3 iron, 3 wood and driver. I hate that loose feeling in my longer clubs.
@sharkfinn6469 Жыл бұрын
I have regular flex because that's what my burner HT 's came with
@reecejones31872 жыл бұрын
I got my irons second hand with ref flex before I really knew anything about shafts etc I had a fitting yesterday and I swing the 7 iron 99mph so all this time I should have had x stiff. Hopefully explains the inconsistency
@justinstephenson93606 жыл бұрын
I have always played regular shafts, apart from a hybrid which was a stiff shaft. I have an average swing speed (77 mph in 7i) which I am trying to speed up (I can hope!!). Yet the stiff shaft in the hybrid always felt nicer. For me the biggest issue is the shaft weight. I play a 65g graphite shaft in my M1s. It is very nice. My club pro shop has the 919 Forged and Tour in as 7i demo clubs so I tried them out. The demo 919 Forged was in a 95g steel shaft - that thing felt so heavy, in fact all I could feel was the weight of the shaft. Oddly though it made no difference to distance and the 919 Forged was an incredibly straight hitting club, I really struggled to put any shape on the ball.
@andysuzi15 жыл бұрын
Interested to see something on shaft weight and how it can change strike position................or not 🤔
@skithewhitestuff6 жыл бұрын
Do you have a fitness regime and if so is it golf related and what does it consist of? Great video by the way.
@markegan11406 жыл бұрын
Great vids keep it up
@JamesRobinsonGolf6 жыл бұрын
Thanks mate! :)
@mickspsmith6 жыл бұрын
Great video James, also watched the driver shaft comparison... I play off 5 handicap and I have always played stiff shafts in irons and woods. Im 5ft 7 and was over 12 stone, driver swing was always average 103mph lost weight down to 10 stone speed went to 100mph been at gym over a year, now at 11 stone, speed up to 108mph and climbing. I have xp 95 stiff in callalway apex irons and stiff tensei in ping g with average carry of 260 yards ... I hit all really good, but some big pulls on irons now and again... Should I have a look at a session on a flight monitor with extra stiff?
@JunixZzHD5 жыл бұрын
If anyone is lost like I was (sounds like a Jehova's witness start) before I got custom fit - this might be helpful: Club head speed 7 iron: 86-88 MPH - got recommended S300 which I got together with new P790s. Club head speed driver: 98-100 MPH - got recommended a stiff Tensei 55g What I find a bit odd is despite your slightly faster CHS of 92-ish MPH compared to my 87-ish, I hit my 7i around 160 meters (175 yards) - although with my previous irons, XR, which are cavity filled. Didn't hit my new P790 much shorter, just a few meters but I just found it surprising you hit your 7i roughly 150 meters with a 5 MPH swing speed difference. This concludes my essay no one will read. :)
@Sportstouring6 жыл бұрын
Great review.
@dalecollins57956 жыл бұрын
Interesting test. Thought the spin would be higher for you with the S300
@kyleeverhart39796 жыл бұрын
This is a little weird, a few months ago I was using S-300 shafts in my clubs and went to see if I would fit into a different shaft. Long story short, I tested 4 different shaft companies in Stiff and their X-stiff options. I end up with X-100 shafts and my irons are more consistent and my misses are a lot smaller. I am also writing this before I fully watched the video. So, I am curious to see what you have to say. Thanks for the great videos!
@JamesRobinsonGolf6 жыл бұрын
Thanks Kyle! Really hope you enjoy the video! Also check out my “blind test” of shafts in the taylormade GAPR. You may find that interesting too
@kyleeverhart39796 жыл бұрын
@@JamesRobinsonGolf Will do!
@tinusnel54426 жыл бұрын
PX 6.5 Like the launch & flight
@zacharydmoser6 жыл бұрын
Like n racing , " lighter is faster " . I'm always fitted for stiff , 99mph 7 iron n 116mph driver . But I prefer almost always regular 95 gram steel or right now I got projx lz. 6.0 graphite in some mizzuno 919 tour and knocking the crap out of the ball .