Does it still Run??? Getting the '70 Nova ready for the track!!!

  Рет қаралды 6,996

Hatch's Recreational Engineering

Hatch's Recreational Engineering

Күн бұрын

Пікірлер: 63
@chrisstage1334
@chrisstage1334 11 ай бұрын
If you ever need a trailer, Candace said you can take ours anytime.
@lindanelson8400
@lindanelson8400 11 ай бұрын
I really enjoyed the line from Slingblade. "It ain't got no gas in it."
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
Hahaha glad you liked it! It works so much better with fuel lol
@xozindustries7451
@xozindustries7451 11 ай бұрын
Check the fuel pressure at wide open throttle through the gears, sounds like it just ran out of fuel at the top of second gear. People think they need all the trick of the week speed parts, but go look at the guys in the stock class, until your combo is optimized it’s a waste of money to buy speed parts that don’t fix any problems that don’t exist
@vincekartes7145
@vincekartes7145 6 ай бұрын
Long live beater nova hot rods and the guys that build them! Yea!
@DangerousSportsForSeniors
@DangerousSportsForSeniors 11 ай бұрын
Maybe a little meet and greet at the drag strip if you don't mind. Have fun. Thanks for sharing
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
Sounds like the fuel bowl might being sucked dry? That car should have a 3/8" fuel line but for some reason they made it a 5/16" could explain why that's happening if that is what's happening? Maybe they did use 5/16" fuel line on it if it was a 6 cylinder car originally? My 1964 Buick Skylark that came with a sbb 300 2bbl came with a 5/16" fuel line and when I had a sbc 400 in it a friend loaned me a Q-Jet to try and it worked great until I shifted into 2nd gear where it fell on its face.😯 Hope you figure it out.😎👍
@WVXL64
@WVXL64 11 ай бұрын
Something to try to help that carb, put a bigger air cleaner on it. Even if its the stock steel one with the lid flipped. That little one might be choking the carb.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
I ran it with zero air filter when it did that
@RaysGarage
@RaysGarage 11 ай бұрын
Sounds like she is running good Dan, looking forward to your first pass at Island!!!
@mronion1343
@mronion1343 10 ай бұрын
You should at least put an intake and 4 barrel on that poor old 307
@alanwilliamson6421
@alanwilliamson6421 11 ай бұрын
Awesome cars to be wrenching on
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
that ‘70 sounds spicy guys
@richardoswalt1009
@richardoswalt1009 11 ай бұрын
You probably know this but a reminder if you store a vehicle for an extended time have fuel tank full and stabilized. I'm 73 years old and have stored motorhomes, motorcycles, tractors ,cars and trucks with no issues. I currently own 15 vehicles that have not been started since November and have confidence that they will. Just a few words of wisdom...
@seankrieger483
@seankrieger483 11 ай бұрын
Sounds really good 👍
@olikat8
@olikat8 11 ай бұрын
Irony- the start time for an event is coming up and we are jamming to get my Valiant back together for the 1250-mile run. Timing!
@Novarider72
@Novarider72 11 ай бұрын
Bro you are a professional gas pourer
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
Hahaha thanks!
@Novarider72
@Novarider72 11 ай бұрын
I gotta give it to you man, when you start pouring that gas. You started showing your skills man I was impressed. I was like this man can pour gas from a great distance.
@keithalbrecht4785
@keithalbrecht4785 11 ай бұрын
My brother had '73 SS 350 2barrel 3 speed on the floor, that thing would 55MPH in first gear then power shift 2nd. So for a 2 barrel crab it got up and went!!! He went up against a 69 Roadrunner with a 440, my brother had him untill he had to shift to 2nd! I'd like to know what it would have done with 4 barrel crab???
@tonywest8140
@tonywest8140 11 ай бұрын
Gonna be fun watching that car at the track. Great job man.
@Charlie_Prinz
@Charlie_Prinz 11 ай бұрын
Awesome progress! 👍👍 Maybe try higher fuel pressure or a high flow needle and seat for the carb. The carb bowl may be running out of fuel, causing a lean condition. See similar issues with quadrajets on modified V8s. 😎😎😎😎
@frankgomez1965
@frankgomez1965 11 ай бұрын
Need some new pins and bushings on those dooe hinges
@IntegrityWorks
@IntegrityWorks 11 ай бұрын
Just a suggestion, probably cheapest bang for your buck. Change out the current carb to a Holley 650 double pumper carb, probably see a big difference.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
That’s the plan. Got some plans for this unit but wanna make a pass on it “as-is” first so we can improve on it and make it better
@patrickswagger
@patrickswagger 11 ай бұрын
Seems like it's pretty strong for what it is.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
We picked this engine up only 3 miles from my house for $300 with th350 trans! The guy we got it from had just pulled it from a 72 chevelle the night before we grabbed it. Since the moment I heard this thing run I was pretty impressed and it cruises great! You can’t go wrong with a $300 small block Chevy haha. Even if it is only a little 307
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
​@@hatchsrecreationalengineer1997 Just so you know, the sbc 307 has the thickest cylinders out of all the sbc engines made. A great platform for a boost build. The cylinders are so thick(how thick are they?😁) they're so thick they can be bored out to 4.00" from the 3.875" they have. That is of course, for blocks that don't have excessive core shift or doesn't have excessive coolant passage corrosion. And if you want to improve on the 307, there are stroker options. But before that if you can find a set of sbc 305 Vortec heads, those with a genuine imitation RPM Airgap style duel plane intake would really wake that puppy up. E Bay is selling new sbc 305 heads that have upgraded screw in studs and the seal boss machined for higher lifts. They are imports but are sanctioned by GM. Why get cast iron? Because they're cheaper than aluminum heads made for smaller bores. As for stroker options, to stay on a budget, if you can find a cheap or free sbc 350 crank, you can use cheap cast 4.0L Jeep pistons with 5.7" rods. Some people that build a sbc 383 might have a 350 crank they're sick of tripping over? Doing a dingle berry hone this would be the cheapest stroker build that anyone has ever done on yt! If you're interested, let me know I can fill you in on the details.😎👍 .
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
4 barrel double pumper
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
Yessir 650
@brianschmidt2747
@brianschmidt2747 11 ай бұрын
411 rear end will bump you 3 seconds in the quarter. Guaranteed. My brother
@lesliesimoson8124
@lesliesimoson8124 11 ай бұрын
Dude what shocks did you use for the rear of your nova with the 94 dollar shock relocation kit? I used the same kit on my 78 nova and it fit great just need to know the shocks to use. But i will probably get viking double adjustable tho.
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
So for some reason the other comment I left here disappeared.🤷 Anyway, what I tried to tell you about the sbc 307s is that they have the thickest cylinders out of all the sbc factory blocks ever made. They have 3.875" bores from the factory that can be bored out to 4.00". But only if there is minimal core shift and if the coolant passages are rotted out.
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
I also wrote how to build a budget sbc 307 stroker too using a sbc 350 crank. To keep the costs down do a dingle ball hone and use standard bore size 4.0L Jeep pistons. This would make it a 328 sbc. If you have it overbored expect around 5 more cubes per .030" of overbore. If you have a good crankshaft shop near by, you could have the 350 crank stroked an extra .130" to get 340 cubes out of it. You'll need thicker head gaskets and thicker intake gaskets which are readily available. Can still use the above mentioned pistons but will need to use small journal rods or get conversion bearings.(Not sure if they make the .040" under conversion bearings you would need though)
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
Also if you're going to keep it a 307, a set of sbc 305 Vortec heads are the ticket topped off with a genuine imitation RPM Airgap dual plane intake. The 58cc chambers will give you a nice compression boost and those heads flow almost as good as the sbc 350 Vortec heads with smaller valves. If you do one of the bigger strokers, the sbc 350 Vortec heads will probably be better, the 328 will like the 305 heads better. The Bay of e has new import sbc 305 that is sanctioned by GM. They are machined for screw in studs and the seal bosses are machined for regular seals good for higher lift cams. They're supposed to be less prone to cracking than the factory ones. They also make the Vortec 350 version the same way.
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
If you want to build a high HP boosted sbc, the 307 with it's thick bores is the best factory block to consider. Have 4 bolt splayed caps installed, use a halo girdle with ARP studs and that block is good for 1000 + HP.(As long as the rotating assembly is rated for that much) With a sbc forged 383 internal balance crank and a .060" over you can get 365 cubes. With a set of RaceTec customizable pistons will get you there because of the lack of off the shelf pistons for the 307 because not many people know about the thick cylinders. I have a.060" over sbc 307 in a K5 blazer that I have to block half of the radiator to get heat because of the thick cylinders. It even has a 195° F thermostat.😎👍
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
I’m gonna need your email lol. I’ve got some things I gotta bounce around with you. I like where your going here haha.
@itseithergonnaworkoritaint7852
@itseithergonnaworkoritaint7852 11 ай бұрын
@@hatchsrecreationalengineer1997 It's ytt123 at netzero with a period followed by net, please de lete this after you get it. I had to write it that way or it would disappear.😎👍
@mikeconnelly7032
@mikeconnelly7032 11 ай бұрын
What do you think it will run?
@MaintenanceMike64
@MaintenanceMike64 11 ай бұрын
15.50 1/4 mile
@Dane_the_Pain
@Dane_the_Pain 11 ай бұрын
gday .. fairly new to the channel and trying to work out whats what .. do you still own the blue ‘jenko’ nova or was that a previous build and this green nova is its replacement? cheers from Australia 🍻🤘
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
Hey thanks for following the channel! The “Jenko” nova is still on the channel. We currently have 4 different project cars going at the same time lol. 1.the jenko ‘72 nova 2. The California ‘69 nova 3. The junk yard rescue ‘70 nova 4. The ‘72 Ventura
@Dane_the_Pain
@Dane_the_Pain 11 ай бұрын
@@hatchsrecreationalengineer1997 cheers for this info mate .. appreciate the reply
@chrisland169
@chrisland169 11 ай бұрын
I predict 15sec.72 on the 1/4
@steveballard1463
@steveballard1463 11 ай бұрын
Hope you get bigger air cleaner
@bulldoggarageapparel7511
@bulldoggarageapparel7511 11 ай бұрын
that monster 300 cfm carburetor lol, is that 307 or 350 brother
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
It’s a 307 that came out of a 72 chevelle. Bone stock and mileage unknown.
@bulldoggarageapparel7511
@bulldoggarageapparel7511 11 ай бұрын
cool carburetor and intake upgrade will do wonders i'm guessing high 16 seconds now maybe, i will tune in for race day, thanks for the video brother @@hatchsrecreationalengineer1997
@ClassicCruzer
@ClassicCruzer 11 ай бұрын
97 @ 14:01
@FHHGarage
@FHHGarage 11 ай бұрын
Idk. I think my camaro would give that nova a run for its money. Cheap shitbox vs cheap shitbox. I’m in southeast PA. Whenever ur ready we’ll take ‘em to maple grove. (currently the car doesn’t run so imma act like I’m ready)
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
Dude absolutely! I plan on getting as much track time this year as I possibly can! (Between all the different projects). If I can make it to maple grove I will make an announcement and hopefully we can have that grudge race! What drivetrain you got in the Camaro and what year?
@FHHGarage
@FHHGarage 11 ай бұрын
⁠@@hatchsrecreationalengineer1997awesome man! It has a $150 350 from a 92 blazer. A Muncie m21 and a used clutch from the 92 blazer. 10 bolt rear end with who knows what gears. The cars been on fire more times than it’s been on the road.
@FHHGarage
@FHHGarage 11 ай бұрын
Forgot to even answer one of the questions. It’s a 1978. It’ll be a battle for a Def Leppard 8 track
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
that fire breather needs more cfms not a bigger air cleaner
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
100% agreed!
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
or a holley sniper efi it’s all plug and play
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 11 ай бұрын
Ooof I’m not sure I’m ready for that
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
it sounds like a headache but that system has the easiest install support ever and changing timing fuel and air mix is just tapping a couple of keys on a laptop sir
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
you are a smart guy i have no fear of you not understanding it, not one bit
@gregoryweber7408
@gregoryweber7408 11 ай бұрын
either direction you take this beast i’m proud of ya and i hope i get the chance to start something like that someday
SALVAGED!- DIY Engine Run stand for CHEAP
28:26
Hatch's Recreational Engineering
Рет қаралды 8 М.
TRASH TO THRASHED-FIRST PASS IN THE '70 NOVA
12:25
Hatch's Recreational Engineering
Рет қаралды 23 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Sitting in the Desert for 20 Years! Will this Mopar Run & Drive Again?
1:23:36
Firebird gets junkyard 350 part 1
21:39
Dylan’s Mod Shop
Рет қаралды 4,1 М.
Slow and steady wins the race?? The Nova goes rounds at Island Dragway Nostalgia Event
17:15
Hatch's Recreational Engineering
Рет қаралды 6 М.
Giant-Killing L78 '70 Nova SS396
14:28
Muscle Car Campy
Рет қаралды 92 М.
Barn find AMC GREMLIN REVIVAL, off the road 40 YEARS!!! WILL IT RUN???
44:15
Hatch's Recreational Engineering
Рет қаралды 6 М.
Will it run? A 1971 Chevy Nova in need of some help fast!
48:44
What the Rust?
Рет қаралды 123 М.
Putting a 426 Hemi in a Junkyard 1969 Plymouth Belvedere! | Roadkill
16:24
MotorTrend Channel
Рет қаралды 847 М.
Salvage to Savage, '70 Nova Revival
48:07
Hatch's Recreational Engineering
Рет қаралды 229 М.
Revamping the junk yard '70 Nova!!!
16:01
Hatch's Recreational Engineering
Рет қаралды 11 М.