Does Your FPS drop as you RPS increase?

Does Your FPS drop as you RPS increase? - Easy Fix!

Рет қаралды 1,986

Күн бұрын

Пікірлер: 17

@frankysfuneral 10 ай бұрын

thanks for the video- i have a cyma plat mp5 running on 13:1 and had a problem like this with a t238 motor so i went back to the original- i’ll try this tip out

@nwobedits 6 ай бұрын

Had the same issue with my cyma platinum and brushless motor. Fps loss in semi and auto. Only thing that would help is lowering the rpm on the motor. After modifying the stock delayer chip and trimming the tappet plate I now have no air loss. Thank you for the tip. t238 39k Stock emg 13:1 stock m125 spring 365fps 38 rps

@adzzzysarmoury 6 ай бұрын

Excellent, glad you sorted it!

@fubene5495 Жыл бұрын

Great video! Thank you for sharing your knowledge ADZZZY!

@adzzzysarmoury Жыл бұрын

Thank you!! 😎

@daniwamoto 9 ай бұрын

Thanks dude! great video! Problem fixed!!!

@adzzzysarmoury 9 ай бұрын

Excellent, pleased you found it useful 😎

@agungmm7848 2 ай бұрын

I have a 37k ultra torque motor and 18:1 gearset, but the small pin position to pull tappet plate on the sector gear exactly below the first teeth.. I didnt use amy delayer also and still this problem occur.. Please help..

@kevind9946 Жыл бұрын

Great explanation of the tappet plate and delayer modifications. What is the speed of the warhead motor?

@adzzzysarmoury Жыл бұрын

Thanks, it was a Warhead black 36k

@luketemple16ify 8 ай бұрын

I recently bought a warhead motor, and everything i read said not to use ROF control on and ETU (Aster V2 in my case) or it could damage the motor. Does the perun have a different system for controlling rate of fire?

@lancelancer8313 7 ай бұрын

cnc infinity with 40k was causing me no issues vs my 35k warhead causing tappet-plate breakage and airseal failure. could this be because the warhead is brushless?

@airsoftattic 6 ай бұрын

Wouldn’t precocking help with that issue?

@adzzzysarmoury 5 ай бұрын

@@airsoftattic pre cocking would see the FPS drop also on semi as the drop is FPS is cause by the nozzle being retracted prematurely before the BBs has fully accelerated in the barrel.