This is the clearest, most straight forward explanation of these hinges that I've watched yet. Thank you!
@DoingitWithjason Жыл бұрын
Awesome!
@the_womble_king4357 Жыл бұрын
Thank you very much! For the life of me, I couldn't figure out how to align the cabinet doors. Great video.
@BobKovacs3 жыл бұрын
Just what I needed to know. We build a custom cabinet for our bathroom, and this video showed me how to adjust it in one minute. If the wife is happy with the adjustment (and she is), then I'm happy. Thanks!
@mick14064 жыл бұрын
Best video on this topic I've seen. Really clear explanation. Got job done fine. Thanks so much!
@hjoe44739 ай бұрын
Thank you for your excellent instructions. It is clear with good pace of delivery. Your close up videos were very helpful.
@oldhelmet42132 жыл бұрын
Thank you for posting this. I hate hanging/adjusting doors as I have not been very good at it in the past. This video allowed me to adjust a slightly rubbing kitchen door accurately, and in in no time at all. Thanks again.
@davidhalley9795Ай бұрын
OMG! Thank you for the best video on this! I just updated my old hinges and a few were off. I wasn't sure if I could adjust them. Two minutes I was done!
@barrycouchman53603 жыл бұрын
The best and clearest video on how to adjust cupboard doors. Thanks. B.C.
@tysonsdream15 ай бұрын
The best and clearest video on how to adjust cupboard doors thank you so much
@snipsalott5 жыл бұрын
This was the best 6 minutes I've spent on KZbin in a long time. Thanks for explaining everything I didn't know that I needed to know about hinges. I think I'll go fix my cabinet doors now.
@DoingitWithjason5 жыл бұрын
Thanks! Best comment ever! 😁
@johnlove41832 жыл бұрын
Thanks! knowing how they work allowed me to make a fix in 2 minutes.
@martinpaul61464 жыл бұрын
Just fitting a kitchen here in England, Europe and this video has proved to be brilliant. No waffle, straight to the point and accurate. All the doors in our kitchen perfect in 20 mins. Many thanks 👍
@DoingitWithjason4 жыл бұрын
Great to hear! Thanks for the feedback 👍😊😊😊
@KevinOlson-io3dm Жыл бұрын
Well made video with "just the facts." Nicely done!
@1rcproductions3 жыл бұрын
This is the best video I have seen on this topic and has helped me make the necessary adjustments. Most only mention the two main adjustment screws. Thanks for this video.
@Quality_Guru Жыл бұрын
I had to replace a Blum Hinge. When I installed it the doors did not align up so I search for intel on how to make the adjustments. God bless you for making this video. Interesting point is that when I was so proud of y work, I looked how the professional had aligned the doors. LOL - they all need to be adjusted!
@VickyTaylorRoberts2 жыл бұрын
Thank you Jason. Managed to solve a tricky hinge issue with your clear instructions. Besr vid of half a dozen i watched. Saving this video for all my future cab hinge needs!!
@DoingitWithjason Жыл бұрын
Thats great to hear Vicky Taylor Roberts! Sounds so profesional ❤
@kirtwillis91443 жыл бұрын
Finally, someone explained how to adjust the soft close mechanism! Thanks a bunch.
@seuzen55702 жыл бұрын
Thank you for sharing your expertise!! My cabinets are now aligned and I am thrilled!!!!!
@cyberg49072 жыл бұрын
thanks Jason, a couple top and bottom doors had been rubbing against each other for months and I’d been putting off tackling the repair, unsure what needed adjustment. BAM done in 3 minutes after watching your vid. No more two doors opening when we only need one open. Like Red Green says “if she doesn’t find you handsome she should at least find you handy”
@pfedorch2 жыл бұрын
Great video. Nice and clear, showing exactly what screws do what. Thanks!!
@evaristocruz35603 жыл бұрын
Great job explaining how these hinges work and the proper way to adjust them. Was able to correct the alignment of all my cabinets after watching. Thanks!!
@DoingitWithjason3 жыл бұрын
Good deal!!
@kuyajosephtutorials97093 жыл бұрын
Short but complete info... Not much chit chat.... Verygood
@petestewart15662 жыл бұрын
Best. Demonstration ever.thank you 👍👍
@cybersewingschool874 Жыл бұрын
Thank you! Concise and to the point. Just what I needed :) .
@andyhandprint25494 жыл бұрын
Excellent demonstration. Clear and concise.
@DoingitWithjason4 жыл бұрын
Thank you! I greatly appreciate that
@stan121midling52 жыл бұрын
thank you, i just adjusted my cabinet door in my kitchen in like 2 mins, hehe
@roberthuppe18644 жыл бұрын
Just finished repainting our kitchen cabinets. Your video came handy when re-installing the doors and adjusting the hinges . Thank You !
@DoingitWithjason4 жыл бұрын
No problem! I'm glad it helped you out!!
@DoingitWithjason4 жыл бұрын
It may be over adjusted and binding up from the other hinge that is on the door. Is the hinge a long arm or compact?
@nightwatch19643 жыл бұрын
Clear, concise. My wife thanks you.
@mmelach4 жыл бұрын
Very clear instructions, to the point and very good explanation. Well done and thanks!
@DoingitWithjason4 жыл бұрын
Your welcome! And thanks for watching!
@tomgaro11593 жыл бұрын
Thanks Dwight! I wondered what happened to you after the "Office". Good Video!
@rodeniagalbines2232 жыл бұрын
Thank you! I can fix my kitchen door cabinets.
@clem02031964 Жыл бұрын
Thank you so much, I have been cursing at our kitchen cabinet doors for years.
@DoingitWithjason Жыл бұрын
HAHA good deal! Here is a deal from the place i work if you are interested! Free shipping PROMO code- JFREE www.woodworkerexpress.com/
@makeenibada47535 жыл бұрын
i am watching this to make an NVG mount in my cap using the hinges, but using the 270 degrees ones, thanks for the detail
@DoingitWithjason5 жыл бұрын
Your welcome!!
@azona87454 жыл бұрын
This video just made my day!! Thanks so much! Now my cabinet closes!!
@glennpilgrim2153 жыл бұрын
excellent, just what i was looking for , subscribed
@DoingitWithjason3 жыл бұрын
Glad it helped!
@jbradley1048 Жыл бұрын
THANK YOU!!! Excellent video.
@conradbrooks19245 жыл бұрын
Mate, my cabinets hinges have been a shambles for years. Thank you for sharing. They are now 10x better then they were
@DoingitWithjason4 жыл бұрын
Very nice to hear! I'm glad I could help
@jinata32 жыл бұрын
Very good explanation
@lorrieATX3 жыл бұрын
Thank you! This was super helpful to me.
@Whatevs84853 жыл бұрын
You are a legend, thanks mate
@ColdWarVet6073 жыл бұрын
Great Stuff my friend , thank you for being right on the point and a great demonstration!
@Tom-of9ec Жыл бұрын
Jason, great video, thank you. The tension has gone out of one of my cabinet doors (Blum hinges, about 20 yrs old), the self-close not working at all. Any suggestions for that. Thanks Tom
@dwightfloyd33814 жыл бұрын
Thanks. Nice clear and complete descriptions. I recommend.
@DoingitWithjason4 жыл бұрын
Thank you!
@steveleston1848 Жыл бұрын
I'm missing the back most screw on inside cabinet doe's this srear most screw hold the 2 pieces together. like the piece thats on door it clips into the cabinet piece so the rear screw must hold both pieces together correct? excellent video.
@timmytee734 Жыл бұрын
Never new. I always thought they were just annoyingly over complicated hinges. Thanks a million!
@amjadmohammad-zq8iu Жыл бұрын
Mate you solve my problem Many thanks
@jessheredia57404 жыл бұрын
Straight to the point love the video !
@DoingitWithjason4 жыл бұрын
Awesome! Glad you enjoyed it
@brainwaves13 жыл бұрын
Thanks just fixed my problem!
@alexgreen66714 жыл бұрын
Thanks very much, this really helped me sort my kitchen doors.
@DoingitWithjason4 жыл бұрын
Awesome!
@antonymurray19763 жыл бұрын
Great 👍 video 🍻
@PratabAli4 жыл бұрын
Great video. Sorry for this 'stupid' question. I bought four Blum concealed hinges. Regarding the two adjustment screws, for IN vs OUT and LEFT vs RIGHT. Before I install them how do I ensure that the screws are in neutral (initial 0) position. So, that once I've installed them I can fiddle IN/OUT or LEFT/RIGHT. Looking at my four hinges all four have the cross on the screw head at different positions. My mounting plate is a simple screw on type, without the ability to be adjusted up or down. The mounting plate will be installed Thickness of the door plus 38.5mm. Thank you for any advice given.
@corteltube2 жыл бұрын
Great videos…thanks.
@Realism914 жыл бұрын
At the cabinet shop I worked at we'd use one soft close and one regular hinge for normal size doors or a soft of the top and bottom with a regular in the middle good tall doors or all soft close if it's a heavy door.
@Realism914 жыл бұрын
Just a way we saved the customer money without lowering the quality.
@DoingitWithjason4 жыл бұрын
Right on! I used to do that as well!! Then it became too overwhelming on how many of what to order and then I just shut off the ones that you didn't need...* Sometimes when a door is so fucked out of square and the room totally sucked for square..you can use only one soft close hinge with a heavy door! I had 6 hinges on one door and the room was so cocked that I had to turn off 5 hinges with the tension I was getting...3 world problems but man it sucks... customer was happy!!! #noclue
@Realism914 жыл бұрын
@@DoingitWithjason the company I was with would order two huge wholesale boxes of both, in their situation they never really had to figure out how many were needed they just had to make sure their stock pile was not low. Good idea if I do a kitchen for a friend though, I'm not with that company anymore. Their paint booth was in their shop and the whole place smelled like lacquer, ever if I was only at the shop long enough to unpack the tools from the van after a install in 10 minutes I'd smell like lacquer.
@angeladyson7367 Жыл бұрын
Ok, what happens if the hing clip has in part come away from the cupboard (carcus)? How do you properly remove the hing clip so you can slip it back on its track? I'm going to have to unscrew the hinge all the way aren't I?!
@jvandermoer10764 жыл бұрын
Very informative and concise! Thank you!
@DoingitWithjason4 жыл бұрын
Great to hear! Glad it helped
@longnguyen-li5oe4 жыл бұрын
Thanks it was very helpful
@mikefirthy3 жыл бұрын
thanks Jason ....excellent
@lclover772 жыл бұрын
Awesome ......thanks !!
@LiloUkulele3 жыл бұрын
What are the pros and cons of the Blum horizontal cam mounting plate vs the cruciform mounting plate????
@teaglet2 жыл бұрын
I have the top hinder, have yet to get it aligned, one door higher than the other, it’s been three years, dah
@motorcopT2 Жыл бұрын
Thanks!
@tyle76932 жыл бұрын
what is the part number of the mounting bracket of the top hinge?
@sonneshields18004 жыл бұрын
Great video!!! You had me at "it seems kinda weird .... but it's not." I'm installing some cabiets this coming Monday. The gal I'm installing for may not pay me for all the work I've done. How bad would it be to install the doors perfect... then adjust them so the slow close doesn't function and they are all outta wack??? Do you think she would give me the full payment to get them back to good?
@DoingitWithjason4 жыл бұрын
Possibly! I would adjust them all cranked in and out😅😂 Good luck! Hopefully she will pay you. Or maybe arrive with the doors and then make her pay you first
@coreyacre60702 жыл бұрын
I have a door that does not shut completly, how do I fix that?
@sherylleslie64542 жыл бұрын
I got my cabinets soft close, and the the soft close went away and I did everything you told me to but it won't return. Help!
@sherylleslie64542 жыл бұрын
Thanks for teaching us
@STV-H4H5 жыл бұрын
Dwight Shrutes twin brother, the one with some common sense.
@MM-cz1dw4 жыл бұрын
God bless you sir
@ricko2001 Жыл бұрын
Problem with my cabinet is that the two doors are too close together and they bump when they are both closed. I want to increase the gap at the bottom, but the adjustment screw is as tight as possible - end of its range.
@krg99424 жыл бұрын
Thank you! You saved me!
@DoingitWithjason4 жыл бұрын
Glad I could help!
@lisaroth75265 жыл бұрын
Thanks Jason! I shared on FB.
@DoingitWithjason5 жыл бұрын
Thanks for sharing!
@Cartzboy3 жыл бұрын
My door is hanging of the bottom hinge how do I tighten it up
@jenny32443 жыл бұрын
What if door is crooked vertically?
@conniemccollam26053 жыл бұрын
My cabinets are very old& doesn't have this type of hinge. My door won't close all the way.
@josephy0003 жыл бұрын
There's a knocking sound from ine of my hinge when I move my door slowly and they are brand new hinges. Any suggestions?
@DoingitWithjason3 жыл бұрын
Something is adjusted out of whack. Usually that sound is when a hinge is binding. Maybe try to adjust a little bit
@1OnlyGot74 жыл бұрын
What kind of screwdriver did you use?
@DoingitWithjason4 жыл бұрын
A pozi drive works best but Philips #2 should be able to get it done
@bachatassss3 жыл бұрын
Ok so what would happen if I have adjusted all 3 ways and the door just opens by itself. It was perfectly fine for years and now, it won’t close what so ever. out of nowhere, the door would just open up and it’ll be hard to close the door
@DoingitWithjason3 жыл бұрын
Has the weather changed a lot?
@bachatassss3 жыл бұрын
@@DoingitWithjason yes it has. Miami has went from 39-40 last week to 70 this week
@wyooilpatch3 ай бұрын
I appreciate this video-however, it doesn't address the problem when the hinge comes undone from the back plate, leaving the door hanging in midair-not sure how to describe this, but I had a devil of a time trying to get both "clips" to go back on the posts and figure how to get the door to stay put on the hinge 😞and not keep falling off. Somehow with enough choice 4 letter words, a lamp to see what I was or wasn't doing I managed to rehang the door. I do not like these hinges! Being a 73 year old Granny who can hardly turn myself into a pretzel to work on this didn't help!
@shady360XD2 жыл бұрын
I think my cabinet had zink screws and now it wont tighten
@newname37184 жыл бұрын
Thank you 😂
@lloyd67512 жыл бұрын
3.32 where is this third screw?
@johnkinsfather644 жыл бұрын
What if the problem is that the door dosen’t quite close?
@DoingitWithjason4 жыл бұрын
Usually if the door doesn't want to close all the way it's because one of those adjustments are maxed out such as the adjustment that brings the door closer to the cabinet may be adjusted all the way in and it's binding up with the hinge and the cabinet face frame.
@DoingitWithjason4 жыл бұрын
So if the door isn't closing all the way I would have just the far back screw so it brings the door away from the cabinet and then when you close it it should have plenty of room and not bind up
@harrypowers94124 жыл бұрын
👍🏻
@elainegmorrison2 жыл бұрын
One thing: it's almost impossible to see the soft close button position.
@redsimul96083 жыл бұрын
Why u camera like that...its not clear..
@joyceseefried8616 Жыл бұрын
jason, could you PLEASE COME and adjust all my kitchen cabinet doors? none of them are right and i'm so tired of all of them are cattywalla. If you can't come, please tell me whom i should call,PLEASE
@t-wizzoc21294 жыл бұрын
Eshay Ladd if u see this like it😨
@aaronchandler23802 жыл бұрын
I fucked with these hinges for days… no matter how I adjust them the door ends up exactly the same… crooked.
@kippywylie2 жыл бұрын
Same.... But for me it's years. I've got 2 doors adjoining each other that have been out of whack and striking ease other. I have twisted every screw dozens of times over the years in frustration
@chibatruck Жыл бұрын
Appreciated the lesson. The unnecessary gloves are a huge distraction.
@_efault2 ай бұрын
CABINET CARCAS is sooo fuggin metal
@chuckw10213 жыл бұрын
I can,t belive I,m listeing to a guy with a marvel comic t-shirt. didn,t help
@DoingitWithjason3 жыл бұрын
I can,t believe it didn’t,t help you
@tomekapompey5633 жыл бұрын
Woodglut is a good solution for every woodworker.
@allandocater62963 жыл бұрын
I made it with Woodglut plans!
@Person-mh6xq Жыл бұрын
Very good video but would have been better if the door was distinguished from the cabinet itself. Visually, would have been clearer.