Don't Buy Milwaukee Tools From Home Depot!

[@VCGConstruction]

Your BUYING and USING Milwaukee M18 Batteries ALL WRONG! (stop doing this) kzbin.info/www/bejne/iqO8oXSZoLyYbK8

[@kennethsears5041]

I hop you can come down here in bossier city LA Lowe's it is in bossier city

[@dreamlight6460]

Are most of your followers morons or what? This is just stupid click bait crap and if I was Home Depot, I would sue you.

[@calishakes2860]

Who thinks of these dumb video titles. Just wasted 9:33 of my life.

[@yoelyitzchokmoskowitz2320]

You should’ve used it on number one it’s getting you more torque

[@yoelyitzchokmoskowitz2320]

You should’ve used it on number one it’s getting you more torque

[@BruceAlanR]

I mean… Why “click bait” the title Vince? The title should be “Does it matter where you buy your Milwaukee batteries?” I would have watched it either way, but still… A click bait title? You’re better than that man! Just sayin’!

[@scvic2006]

You missed the times when every title was "99% of all people don't know...." Talk about click-baity titles. He's gotten better but still has an addiction to the click baity stuff

[@19grinch77]

I dig Vince....however he doesn't get the deal like some of the other guys do. So....#clickbait

[@d.sack2727]

Ditto

[@Biggiemarvs]

Because it works on silly people which is ok don’t be mad at the hustle be mad at the game

[@eldybellacetin8167]

Cause it works that's what people click

[@pointedspider]

A hole that big needs to be on speed 1. I repair power tools and when I see gears broken, this is why

[@willsrestorations]

That's why his video was absolutely useless and somewhat disturbing. Like I said in my comment he needs to learn how to use a hole saw because he doesn't know how.

[@albertsmedley3636]

@@willsrestorations Content for 14 year olds.

[@jeffselchow5719]

One thing I would have done when drilling a hole that large in diameter is to go on Low Speed, this will give more torque, less rpm. I think that would have allowed all batteries to drill through the 2x material. JMO.

[@korn522]

Same thought. He tests tools, but he doesn't know how to use them.

[@garycasper2929]

@@korn522 Lol…! What.? Vince is an absolute Craftsman in the trades. He purposely maxes out the tools to show you there limits. Here he was showing the strength of the two battery sets. And in order to do that, one needs to bring the tool to failure. Plus , he’s also a showman/ entertainer.

[@crescent11]

Huh? If I jam a 1/2” corded heavy duty corded drill, that isn’t a tool test Unless he is the tool, then yes I suppose it is a tool test

[@patrickgleason3706]

I use a 2 9/16 bit all day at work with my Milwaukee, it just needs to be in the low gear. If it were it would have easily gone through that first piece of lumber he had.

[@qjuantum]

You are absolutely right, I was gonna suggest the same

[@Benefits]

My man is laced up in Milwaukee merch from head to toe. Probably has on Milwaukee socks and takes Milwaukee gummy vitamins too. But still can't drill through that piece of wood consistently.

[@ronl9357]

Forgot the Milwaukee boxers

[@justauser]

He was on speed 2 on purpose

[@rminitials]

You guys are vicious 🤣

[@gsfdriller]

@@Benefits why in second gear?

[@snowdrifter2271]

It’s not the battery, in some instances you’re activating the auto stop feature in the drill! That’s why it immediately stops, it’s supposed to! Keeps your arm from being ripped off!

[@phicun74]

I went to the depot and got them to match competition price from Northern Tool on 3.0 HO cp battery two pack which Northern was selling for $99 and Depot had for $179.00.. best day I had at Depot ever.

[@valeriemckay7064]

I need to remember that.

[@dannymeil3294]

You had me worried for a minute cause I’ve got quite a few promotional 5.0 Milwaukee batteries. But now my mind is at ease, plus I have the fuel tools I’ve always wanted. Which is a milestone to me!!!

[@USN1985dos]

Same here, bro!

[@coreyadams6253]

I just completely switched to Milwaukee in the last 3 weeks. No restocking fees at the Home Depot unlike Acme and Ohio Power. Love the deals that Home Depot has been running.

[@chalillofviso8980]

@Grace b good for you now get the f....out here!

[@chalillofviso8980]

@@mollyv2755 good for you now get the f....out here!

[@chalillofviso8980]

@Helen Christ who the f..... cares!🤪

[@stcandrew]

These fucking bots need to run out of batteries

[@LemonySnicket-EUC]

I would rather support smaller businesses locally. Screw the corporate big box stores.

[@gems6392]

The new drills have a safety feature to prevent you from hurting your wrist. To turn it off you have to put the direction button in the middle and hit the trigger 4x think.

[@GIT2WORK747]

Isn't the trigger locked in the middle position? Bought a new Super Hawg but haven't used it yet.

[@yesnomaybeso5755]

I did not know this. Thank you for this comment.

[@h8GW]

Cordless battery deals don't mean the batteries you get will be worse. It just means those sales are "loss" leaders to get you into the platform or more heavily invested in it. I used quotations because I'm sure most manufacturers still make a mint profit off their battery "sales".

[@wilsonrawlin8547]

Well said. Now days a "Loss leader" sale item means they only sort of pillaged our wallets. ;D

[@ThePigsmarch]

Exactly. That's why it's usually on the lower priced tools or older generation ones. Getting someone to go "oh, now I have 2 or 3 batteries and 3 tools, I might as well stick with it".

[@toddincabo]

👍 I worked at a jobless cord site once.... nothing to do but look at cords.

[@jjk8383]

You had me worried with that headline….buy em where ever the price is right and where ever is most convenient for you! Except for True Value, I got screwed over 1 too many times at the place with the friendly hardware folks! Never again!!

[@takoflame4948]

i think if Milwaukee sold inferior ones it would be pr mightmare

[@cassijoanna]

Click bait

[@alexp6016]

Had me worried with that title... but reassured what I thought previously, I have a hard time believing Milwaukee would spend the time/money to make a cheaper version to offer for these sales/"bonus" kits.

[@joshc606]

Speed 2 makes a difference for sure. Also the Amp/HR doesn’t determine the power so much when fully charged. Just how long it can go. My M18 metal saw came with a 8amp/hr battery but I can use a 5.0 and it still cuts the same just not as far haha

[@paulbodenstab917]

Supposedly the 6.0 and up have an extra fuel cell which allows for more power. The 2.0 and below have one less fuel cell and therefore offer less power.

[@thorn3377]

@@paulbodenstab917 His pinned video on Buying and Using Milwaukee batteries explains this and the fact that there is some cross over of size vs amp hour. A 3.0 that is the same size as a 2.0 has the same number of cells but better quality. As where the larger 3.0 has the extra cell, same number of cells as a 4.0 or 5.0, but lowest quality cells. Buying the highest rated battery in a particular size will give you the best battery at the lowest weight.

[@usatman711]

Hey Vince! Nothing to do with this video but give everyone a heads up about A HUMONGOUS GIGANTIC SALE of the century. I was at Home Depot last night (West Branch, Michigan) and 90% of their Spax screws in all sizes are marked down about 75%. You need pics, I got em. It's crazy. I grabbed a Homer bucket that happened to be right next to the shelf and started to fill the bucket with what I use the most and then some randomly. I walked out the door with 14 - 1lb. Boxes for $78. All of the $14.40 boxes are only $3.73 and the $18 boxes are $4.83 . They might be having contract issues as Spax screws were always more expensive than GRK. Their clearing that whole shelf section. Maybe you've already heard. Let us know when you do. Thank you VCG

[@VCGConstruction]

Awesome cuz, glad you scored!

[@edgee7612]

@@VCGConstruction why u click baiting Vince cmon man

[@usatman711]

@@edgee7612 Because I'm not sure how to PM him the info, and IMO this would be some news I would like to know about sooner rather than later. They are flying off of the shelves. VCG has 552,000 subscribers to share the info with. It's surely a heck of a deal that I wouldn't want to miss out on.

[@jmackinjersey1]

Because they are Spax, and they are low rated junk screws. They use the cheapest, lowest quality steel wire and have old thread sets. Their heads twist off too easy, and their points are non-existent. No pro uses them.

[@usatman711]

@Jeremiah Mckenna Are you speaking of all their sizes or just longer lags? Any specific size or type that had continuously failed? I haven't had any issues with the sizes that I usually use which are 2.75" and shorter. The shear strength holds up to its rating. I'm not a "brand loyal" person as I usually only buy the Spax when they're discounted. I've always used GRK for anything 3" and longer without any issues.

[@g333k]

Possibly does the new gen 4 drill have a kickout feature where it shuts out so you dont twist your arm/wrist?

[@adammoss2710]

The Jobless Cordsite 😂😂😂 Thats the Future.

[@_____shredx]

😂

[@bigjim1488]

This video is click bait. Don’t turn into a hack.

[@robertweston2775]

The batteries are not the problem; looks like you are using the incorrect speed setting on the drill. Also, the tool is not in hammer mode... when not it hammer mode, the low-speed (high-torque) setting needs to be used.

[@5cranch]

Well, don’t mean to disrespect you sir but amp hour size means how long the battery last, not that it’s more powerful. Secondly you should be running that drill in low when using a bit that large

[@Antonnn1111]

He’s not too intelligent lol just your typical loud New Yorker who does steroids and talks real good (salesman type)

[@KD-hi6hh]

The best drill to use for larger holes like that is a slow turning Hole Hawg with the HD12 Battery. Me personally, I have a 30 year old corded Milwaukee right angle drill that has never let me down. Save the small drills for small holes in plaster or metal....

[@mikecrawford5331]

if you want real power use corded.

[@craigkoen4181]

I've used Milwaukee, Dewalt, Ryobi, Rigid, Kolbalt and even the Hercules brand from HF. Out of all of them I've had the worst issues with Milwaukee. I've always said they are underpowered and your demonstration proves it to me. None of the other brands would have had the difficulty going though that piece of pine that the Milwaukee couldn't muster. As to which of the others are better that depends on their usage and price point. After my Milwaukee drill fell apart drilling a hole in a ceiling for a can light I tried the Dewalt and haven't looked back. I reached out to Milwaukee but there was no customer service. Not to say that that wouldn't happen with Dewalt but I've never had that issue with it.

[@alexaroche6582]

It's not the battery it's not the drill it's the wrong speed

[@Bay0Wulf]

Previously a Wholesale Buyer/Distributor of Commercial Tools & Hardware … A note … with Milwaukee specifically … and Reputable Tool Mfgs generally … 1. Use “DRILL” Setting when Drilling. NEVER use “CLUTCH” Settings unless you intend to “Fail” on a bindup. 2. Hammer Drill/Drivers have a markedly Lower Torque and, are at best, a compromise. Yes, if you often need a “Hammer Drill” these are good but only Good/Mediocre as a Drill where they will “Fail/Bog Down) … (they are also cheaper than the Drill/Driver check the price)

[@GeorgieCt]

The headline almost had me. If you can do any type of research or get any information with your connections because I’m sure you’ve heard but there’s an ongoing debate in the field that Home Depot gets cheaper quality tools than their tool supply counterparts like ace, hardware or tool stores like that. I have yet to find any concrete truth. Some say the internals are made differently. If so, could you maybe disassemble some of the tools from each place or maybe talk to any representatives and ask them it doesn’t really make sense but also if the money is worth it, I guess it does make sense to the companies

[@jamesmocharski4803]

Could this be a result of the anti-kickback feature (or wrist-saver mode)? It looks to me like it could be that, but, as I don’t yet have the Gen 4, it’s just a semi-educated guess.

[@VCGConstruction]

It wasn’t James, handle mode engaged

[@jmackinjersey1]

Wrong gear for large diameter drill. He should have had it in the low speed, high torque setting.

[@jeremyschneider2103]

I buy all my Milwaukee tools from Home Depot and haven’t had any complaints

[@URcuckoo58]

I know my newer Ridgid drill also will only work in low speed for bigger bits, unlike my older gen drill. I think it’s mostly a newer feature to prevent burning up the motor in high speed, which I did see happen in a drill at work.

[@sondre.linonus.berglund]

I'd like to see a water torture test were you not only run different brands in water, but totally submerge them for hours checking in now and then.

[@manuelbustamante7994]

Watch donut media video

[@steves3688]

And that's why I have kept my 30 year old corded Makita 1/2 drill 600 rpm.... It would tear through that wood...wrist breaker without it's handle.... There are still needs for these corded tools...

[@Reel_SD_Outdoors]

Dude that was the auto stop 😂 not the battery’s

[@Zackfed96]

I can't believe no one has mentioned this still and the video is a over a year old... This guy is awful at took testing

[@kanadiankid28]

man didn't read the manual, I saw "autostop" written on it and immediately grabbed the manual

[@Peter-sh7qr]

If that’s the case then why did the GEN three do the same thing without the auto stop jackass

[@funkmanone]

Please be clear about the setting(s) that the drill(s) are on in the future. It wasn't mentioned once in this.

[@russellbettencourt949]

Just curious do you have the drill set to a number on the clicker mode or are you using the drill mode because I have a Gen 3 and it doesn't matter whether I'm using a high output 3.0 an XC 4.0 XC 5.0 OR a high output 8.0 my drill literally eats through wood and I absolutely stand behind it and love it

[@Aholeintheozone]

It's set to second gear on the top slider so maybe that's why its cutting out.

[@valeriemckay7064]

Isn't the Ah's just how long will last, Amp hours? The 18V is the amount of power? Am I wrong?

[@ex8280]

I bought a blower, and it came with a 5aH battery, haven't openedt he battery yet in a year, does anyone know if it will go bad if I leave it in storage for too long?

[@MasonWelds]

Yeah open it up and use it

[@russellwolter5153]

I have a bunch of the M12 batteries and tools. They are all the same regular batteries - not he or anything special, all the same. There is 1 battery which stalls whether I use it in the drill, impact driver, sawzall, and even the flashlight. Does not matter the tool, the battery runs a few seconds and quits. Let off the trigger and it goes again. Gets the job done but with many stop/starts. There is a problem inside that one battery and it started doing this from the day it came out of the box.

[@Griffinwoodworks]

I have never bought a m18 tool from Home Depot. I’ve bought them from ace hardware and a local place called Darraugh’s. I’ve bought all my m12 tools from them though.

[@harleycyr9007]

@VCG ! Vince, I'm not exactly satisfied with the video. I feel like you could have given an option that would go through either board the first attempt. That's if there is one? Would the 8, 9 or 12 Amp hr's have gotten the job done the first time? Do the results very if put in an impact driver? Thanks from indiana

[@harleycyr9007]

And tell the misses "Hello"!

[@harleycyr9007]

And I get it. The point was comparing the 5 Amp hr Batts you get in the tool deal @ home day' pot.

[@VCGConstruction]

I can run the test again in speed 1 if you like?

[@TrogdorBurnin8or]

@@VCGConstruction Given your serendipitous negative results here, running in every speed to see what's going on makes sense. So would putting it next to the Hole Hawg lineup if you have one in the shop and testing the batteries with that. In my market all the kiln dried wood is SPF or doug fir.

[@EricAltman97]

If you noticed. At the top of the board you were drilling right through. In the center of it you were struggling. noticed the difference . Notice the grain of the wood. The center of the grain is in the middle of the board where you could not drill through in one shot, that would be closest to the center of the tree.

[@EricAltman97]

so the grain is tighter towards the core

[@bryanjenks4991]

Are we sure the drill’s safety shut off isn’t kicking in? It looks a lot like it’s shutting off right when the body of the drill twists - even with the battery that’s working better.

[@Aepek]

4:47 @vcg construction Hey Vince, what if gen 4 was at full speed, than went thru wood? Th8nk might work better b/c of the “anti wrist break tech” which n9t in Gen 3 and can just send full speed right in wood from start (Gen 3 still my fav b/c of the anti kick feature….as have this happen 100% of time when Gen 3 doesn’t do this” fyi….?.?

[@VCGConstruction]

None of the times the drill stalled were from the anti-kickback technology. It was just a real dense piece of Doug Fir! Heavy too!

[@georgfloydvictims]

Your jobless cord site got me lol. Thanks for making great videos. 👍🏻 There's alot of time and effort put into doing these videos for us.

[@VCGConstruction]

Thanks Jonathan, appreciate that!

[@birdsmurf]

What if you tried the low gear Vince? I think that would show different results.

[@VCGConstruction]

It would probably do it in 1st, should we run it?

[@DragonSoulRising2745]

@@VCGConstruction My hammer drill does this in 2nd with my auger bits, when I switch to 1st it powers through. Give it a try. Maybe your battery test will go smoother?

[@birdsmurf]

@@DragonSoulRising2745 Exactly what Trina said. When I drill my water holes when I'm using my hammer drill I always go low gear with my auger bits. It works way better and I would be interested if it would affect the batteries at all. I think that is where you would see your results better than in high gear with the drill camming out.

[@Jaydayallday]

This is exactly what I was thinking. Pretty sure 2 is for high speed drilling and what not. Number 1 is for more power slower and big drilling. Does any manuals say this ? Or anyone ever hear Milwaukee talk about this?

[@ElBatMen84]

the amp power of the batteries is not that give you more power to your drill it just means the duration of time of power in the battery that you can work of if i'm not mistaking

[@johnsoto4686]

Can u do a video ? Impact wrench milwaukee 3/4 one key vs makita xgt 3/4

[@VCGConstruction]

Sure thing

[@johnsoto4686]

Ok thanks 👍💯

[@CritterTheBassGetter]

Wouldnt having it on speed 1 and drill mode instead of hammer drill mode have been better for this test?

[@isaacuban5474]

Yes. Should've been on speed1 without hammer.

[@jimstutz200]

I got this exact deal and the batteries had initials on them. First charge didn't complete the second charge did.

[@declanfarber]

I tell my people to stay away from drugs. It will do them no good. it’s important to keep your mind clear.

[@irishsteell]

have you mentioned the anti twist feature both models of drills have? you know so you don't break your wrist when it over torques. or were you overweighting the competition by deliberately over forcing the Forstner Drill Bit? it be interesting to see what would happen if you added a gen 1 or 2 and take a look at what the overall torque specs are.

[@davidperry4013]

From now one, I’ll call my tool battery charging station, the jobless cord site.

[@joeynieves7677]

Aye just wanted to say I love your channel your a real G im part of the company that’s currently rebuilding Jim’s cheesteaks on south street I’d love to meet ya one day keep up the great content !

[@VCGConstruction]

Congratulations on scoring the build for that Philadelphia Landmark! I’m sure we’ll bump in to one another at some point.

[@mrtryhard1996]

Can someone please tell me why the drill keeps stopping and it’s not binding up? I have the gen 3 I was drilling a 3-5/8 with the hole dozer on Monday and it kept stopping on me I was so mad it almost got thrown across a customers yard my gen 2 would have ate through it no problem what is up with these “new drills”? Frustrated Milwaukee guy here. Also for context I was using 3amp hi output and 5amp batteries neither one made a difference

[@MakeWithMike]

Why do they not give you your warranty?

[@Githrog]

Why are you using speed 2? I thought you want torque not speed with those bits... and were you using the drill in hammer mode? It sounded like it was hammering. I use my Milwaukee hammer drill and original battery that I purchased in 2010 with a 2-9/16" bit in speed 1 on drill mode for running drain lines through walls all the time and have never had a problem.

[@timbrusky1]

Does Milwaukee tools make a 6 pin star sockets. I love Milwaukee tools. Trying to take my front bolts off my front seat and needs a 6 pin star socket 20m, I hope someone might know this answer.

[@WarPigstheHun]

I bought an M12 jigsaw from home depot. The product was abused in storage to the point where the metal frame was bent.

[@rant-n-rave7816]

Spent $3700 at Home Depot switching from Dewalt. Never been more happy! Great deals at Home Depot!

[@davidperry4013]

There are times where you’re going to need the extra oomph of the HD12.0 for your M18 fuel gen 4 drill.

[@mattblattel8106]

I hear it turns flashlights into lasers

[@kitwatson8475]

So where else do you recommend buying Milwaukee tools besides HD?

[@terrmaso]

I use the M18 sander with an XC 5.0 battery. I want to add batteries for larger jobs and have been considering the 3.0 high output. What is your opinion on the potential performance of the 3.0 high output with the sander?

[@carlosf9278]

I generally compare prices at the Home Depot app & online… I thought everyone did since it also shows the sale times at local Home Depot stores

[@stevesmuck2905]

Would you normally use the higher setting, 2, for boring holes?

[@TacticalToast15]

Should be on speed 1, it’s triggering the autostop. It’s not that it can’t do it, it’s just that the drill and Milwaukee doesn’t want you to break your wrist

[@TruthSpeaker1001]

Milwaukee makes great M18 tools! I’ve owned most brands and M18 handle professional workloads for the best prices! They sit at the sweet spot of tools, toughness, reliability and working man prices.

[@marccyberwiz]

Drill in Speed 1 not 2 for wood you need more torque.

[@abramtuecke7954]

I currently work at a "jobless cordsight" 2:38

[@norelation5344]

I figured a volt and Amp test and taking the battery apart and seeing the cells and the differences

[@fixedbypaul]

The batteries should come at half charge because if you are storing batteries long term they say put them into storage at half charge, then fully charge them before using them.

[@davidnguyen299]

I have a problem with my milwaukee m18 12.0 . Brand new but when I use with my tablet saw is only cut a few.

[@chayton94]

Could’ve sworn I subscribed. Idk why I haven’t seen your vids but I’m glad the algorithm brought me back! 🎉

[@ellicars]

What is up with the m 28 battery...is it that much better? Just curious? Thank you much.. thank you captaincobb

[@RyanBrem0504]

Granted, yes you can finess a “smaller drill” like the gen 4, if your drilling that big of holes, you should be using a hole hawg

[@thomasgronek6469]

Why would one use a hammer drill with a door lock bit ? Maybe it should be used with a carbide bit, on concrete, like hammer drills are meant for.

[@prrcpor]

i wont use Milwaukie because the promo 5 ah and charger i bought from home deathspot wouldnt charge . after returning twice . i just refunded my money. went to dewalt . no issues . had rigid for years. batterys break easy . moisture.

[@tanthadcork5040]

I have noticed that my M18 XC4.0 packs (that were bought new in 2014) seem to have a longer lifetime than the XC5.0 packs do.

[@illiniwood]

I was a battery builder for 22 years. I've seen this trend in every battery chemistry, especially with NI-MH. Seeing this time and time again, I don't doubt one bit what you said.

[@benmartin6273]

Vince, 1) buy a hole hawg. 2) learn your speed settings 3) its not the battery, drill or the bit. its the person behind it...

[@goodmanmw]

It’s not the batteries, it’s the drills. I’m sure this has been said but the newer drills have a safety, “wrist saver function” I would be interested if the battery powered hole hog would act the same

[@brucekern1050]

Spoke with Milwaukee rep on job other day. He said Home Depot Milwaukee not same quality as everywhere else. The parts are less quality and cheaper. Thats where they can afford to cut price and deals.

[@VCGConstruction]

What’s the reps name, and where they from?

[@shawnj2319]

I heard there's 3 different ones Napa's, home depot, and tool truck brands tool wise. Batteries I don't think they matter from where as long as there milwaukee.. and are you really supposed to run that bit in high speed???? 🤔

[@igortim158]

Discharge and test charge again please. Is still 4 bars?

[@tonygraff3255]

That switchblade self feed bit you are using is not really for use on the hammer drill. Its really made for the hole hawg low tourqs. Unless you guys use for test purposes only over time will defeat a hammer drill unless used on speed 1.

[@livingroom.computer]

open the packs and inspect the cells. dewalt (atleast what I have opened) are always samsung or LG 18650 cells

[@evlcuz]

Did you turn off autostop?

[@johnmore8867]

I got an 8 Amp Hour battery and it won't charge on rapid charge but it will charge on the regular charger on the rapid charge it flashes red green red green

[@travisswiley7663]

Does milwaukee have a battery that's comparable to the dewalt flexvolt 6.0ah battery

[@Wisconsin4eyes]

I have only bought my team red tools at home depot. I wasn't aware there was any other place (short of the tool truck that comes by my work once a week).

[@gallant056]

“Jobless cordsite is the future” 😂😂 love it

[@dk-bw4gk]

I don't understand what's going on here. The volts are the power and the amp/hours are run time. A 6 ah battery will have the same power at a 500 mah battery. The stalling is in the tool and designed to prevent overloading the circuit.

[@JeepArmyUSA]

Anyone have intel on when the 15amp drops?

[@VCGConstruction]

It’s seems to be in a holding pattern since last June! 🤣

[@JeepArmyUSA]

@@VCGConstruction ah ya yi…

[@HnrPram]

I though, it's all about the sensor of anti kick-back, maybe you can try pull the trigger 5 times after it stops and then pull the trigger to continue your work... It's my humble opinion, Vince 👌🏼😊

[@jonathancamp5149]

If it’s the auto stop that’s cutting the drill off you can change it with putting the selector switch in the middle position and pressing the trigger 5 times. I accidentally stumbled upon that 😂

[@donnie2914]

Based on how a recent warranty on a M12 6ah battery has gone w their new eService I’ll never buy Milwaukee again. It’s a nightmare to deal w them and it takes forever, like a month start to finish to get back to work!

[@MikeFoster-sy8jl]

Explains how I got to my 4th Milwaukee charger… Home Depot bought. 1 bad battery in the batch as well.

[@DevinBird-sx6iq]

So basically get H.O batteries and not the XC?

[@zylent8251]

For what are manily used 51mm holes?

[@mstmayjohnson1202]

I have bought the Milwaukee hand truck luggage cart many times and it never lasts longer than 3 weeks out on the road on my luggage. Not durable at all and won't last....

[@youtubejunky7481]

Maybe but the drill down a gear and not on 2 but 1 and it may go through easier. 5ah is not more or less powerful than 6,8 or 12. Ah is the capacity of a battery, how long will it last doing work at x load.

[@shepherdsfleetservicesllc8147]

Would the flex done better you think?

[@timcarroll6679]

gen 4 has a setting like a auto clutch so you dont break your wrist .... put it in between forward and reverse and click the trigger 5 times to shut off the setting 🤦‍♂️

[@johnlafleur7480]

Seems like all those batteries just stopped and started. I want a drill that continues to run non stop when I'm drilling.