DON'T BUY THE BOSCH GTS254 BEFORE WATCHING THIS // Is the Cheap Bosch Table Saw Any Good?

Here's a quick review of the Bosch GTS254. This is Bosch's entry into the budget table saw market in the Philippines and at just P12,500 or $250, this is, indeed an affordable table saw from Bosch. Of course, given its price range, it does come with a few shortcomings. #DIYweekends

[@AhkemG]

From Türkiye. I bought but i regret, the table isn’t flat! Paralelling thing is bad! Conclusion; You are right. 😇

[@kassidyjones176]

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzbin.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

[@hvacae6904]

Para mapalaki capacity ng cutting nya e mag improvise ng table para dyan di na masama sa ganyang presyo e bosch din naman yan kahit buong plywood kaya i cut diskarte na lang ng gagamit

[@unacasadesteel]

Sin animos de ofender la regla viene calibrada con la microfence por algo. Por que no hay que quitarla. Solo hay que saber usarla. Juzgando por lo que vi en el video la estas usando mal por eso no la querés usar. Con toda humildad te recomiendo que pruebes con setear el final de la microfence justo antes de que termine el disco en la parte trasera. Eso hace que la pieza que estas cortando libere la precion contra el disco y asi evitas mas los kickbacks. Abrazo desde Argentina!!

[@JavierPortillo1]

Hola amigo, estoy considerando varias opciones para mi primer sierra de mesa y esta bosch se ve muy atractiva. Podrías comentrame más sobre la sierra por favor? En específico si la guía lateral es tan mala como se ve en el vídeo. Si es así mejor me decanto por alguna otra. Qué me recomiendas?

[@EveryDIY]

Thanks for this great review! Clear and tackled pros and cons. 👌 Waiting for the other table saw review.

[@smuiv7809]

Well done. For me anyways and maybe for others, I really don't use the measuring guide, I rely more on measuring from the fence and blade using my measuring tape. Well that's just me. As long as the fence is parallel to the blade and the fence is fully secure and stable when lock its all good. One of the most important components of a TS is the blade, what's good with this tablesaw saw is bosch provided it with a top notch blade 40T best or expert for wood the blade alone cost a few thousand in pesos. While others TS provide you only with a 24T blade

[@VincheroKarpintero]

I totally get this perspective and it gives credence to the saying measure TWICE cut ONCE. But just because you've grown accustomed to a certain workflow, that doesn't mean a consistent and parallel (rack and pinion) fence won't blow your mind. Try it. 😉

[@smuiv7809]

@@VincheroKarpintero thanks maybe in the future, but I think it's out of habit for me, kind of standard practice. Always measure twice and checking the equipment twice to see if it's parallel, has the right angle, dry fit first, etc. Well that's just me, to each his own I guess.

[@Crafts-ip2em]

@@smuiv7809 I totally agree with you, Sir.

[@26diesel74]

Best regards!

[@doitnik6935]

I would rather choose this gts254 than those di mapgkakatiwalaang brands. Those cons can be fixed right away..Price is fair enough for the build, kisa nman s ibang brand n ka presyo pro low quality nmn materials made, lalo n motor nya.. availability ng spares at warranty should be considered also when acquiring ts, and Bosch ay anjan lng

[@VincheroKarpintero]

Just curious, what's the fix for not being able to rip 24 inches?

[@benottv7002]

​@@VincheroKarpintero ang hina mo naman. Pinoproblema mo yung pag-cut ng 24" lenghtwise. Eh yun bang pinopromote mong tablesaw, kaya bang tumabas ng 48" crosswise? Kelangan ba talagang siraan mo ang Bosch GTS 254 para lang bilhin nila ini-endorse mong Lotus? Mahina ka palang nilalang eh, Tweaks lang di mo pa kayang gawin. Dependent ka masyado sa tools out of the box.

[@benottv7002]

​@@VincheroKarpintero kelangan ba talagang isubo mo ang isang buong plywood sheet para lang sa sinasabi mong 24" lenghtwise cut? Delikado yun. Ano'ng ginagawa ng Tracksaw? Kelangan ba laging 24" ang tabas pag gagawa ng cabinet?

[@reYIDad]

+1

[@Luqman899]

its crazy how that in a profession that requires accuracy and precision, you get a table saw that has such an unreliable fence.. now i understand that its DIY/Jobsite saw but still, how hard is it for brands to build a quality, accurate fence

[@dionirvingtimbang5212]

Buti nlng merong ganitong review na unpaid/unsponsored kasi no holds talaga and real ang ilalabas. It helps sa mga namimili ng entry level na table saw tulad ko

[@rafamerengues8935]

I think 23" rip capacity is acceptable. Though would be better @24.but either way your 48" plywood wouldnt be cut in half

[@banja9172]

Thank you mate. You saved me some money!!!

[@mehulpgajjar4901]

Bosch please adobe dewalt table saw fence system and i will buy this saw even if it is 20% more priced , because for me fence is everything

[@user-ri7ux7oy5m]

Beautiful presentation

[@ThoughtFission]

Very helpful video! Well, back to the DW7492. :)

[@carlorealeza2176]

thanks for the honest review.. for me ang fence ang sablay. deal breaker tlga. ill wait for ur comparison video. for sure may mas magandang local brand dito hehe

[@garancompany2720]

I would like to buy this Bosch circular saw. I would use it as a hobby device. Do you recommend him to me. Will it be good for hobby jobs?

[@besimperolli]

Thanks for the review. What about the soft start and the loudness? Could you please inform me a bit and compared to the Stanley sst1800 which would you advice and which one is more silent? Many thanks

[@carlsberg-gs6rl]

Great review. How stable is the fence? I have a Makita MLT 100 and fence wobbles and is absolute garbage. I plan on selling the Makita and getting this but I don't want to get burned by another table saw with a crap fence.

[@TheEnzomiac]

Thanks for the honest review

[@zdzichkowalski2681]

Thank you!

[@reynzvlog8561]

Thank u sir for good review sana maka bili nah pag uwi sir galing barko good luck po sir😍😍

[@giansarPL]

Very good, time-saving review.

[@kennethhunt6270]

Hi I enjoyed watching your video, I agree with what you said about the fence. I am wondering if you know where when required that you oil certain places where marked. The manual is not very clear about this matter. I tried looking at a blown-up manual but no joy. Any ideas at all?

[@adrianeroa2994]

Boss subscribed kita kc mgaling ka mg explain mgaling ka mgsalita at mg mg-english..kla ko foreigner..salamat po sa mga vids

[@soltanyhandcrafts]

Just a question hope you answer! I’m looking for a saw to cut hardwood like walnut or oak. Is saw good enough for cutting hardwoods?

[@VincheroKarpintero]

I would get a higher end model if you are looking at hardwood. I have some other videos on other table saws. Check out the Dewalt or if you really want something on a budget, the Skil table saw might be a good option.

[@pjgildore2148]

mas maganada ang quality and feature nang lotus table saw kisa jan.. mukhang tinipid ni Bosch Yung pag gawa nang table saw nila kasi nga mura sya...

[@muslumcalkin7776]

Hi BOSCH GTS 254 - Stanley Stanley ST SST1800W Which of these 2 devices is better?

[@louieg8825]

stanley is a garbage better buy dewalt their sister brand

[@ravivirmani8725]

Like your opinion but DeWalt is not a budget saw

[@ravivirmani8725]

@@louieg8825 what about Makita mlt 100

[@ravivirmani8725]

Please answer

[@louieg8825]

@@ravivirmani8725 lol that Makita is worst than Stanley, believe me one of my co worker have that model and for months of use he already encountered many problems, the fence is also garbage you can search here in KZbin about that model and see for urself what other reviewers had said about that model. Nobody can beat Dewalt's Rock n Pinion fence, im not a Dewalt fanboy because i love Makita all my cordless drill and other powertools here are Makita with some Bosch, its just that Dewalt's tablesaw is superior from Makita and Bosch.

[@kustomartstudios9733]

Great review

[@Atacado2000]

Wow, this is agreat review.

[@darthpotpot]

what's the saw blade bore size? 30mm sa specs i see online, but someone is telling me, 25.4 daw.

[@silviubrinzei2304]

We have better brand at the same price?

[@vinrock6433]

Gudevening sir vinchero 😊

[@ravivirmani8725]

Is stanley good or bad as a budget saw

[@ericmogeni8694]

Good

[@widowspider69]

please share supplier

[@bastian612]

La recomienda o no la recomienda

[@uncabro]

ggrrreeat review, thank you

[@leinahr]

Nice

[@issacsilungwe245]

Like this here much

[@harmonikaph2037]

Wooooo 😍

[@user-cb1gq1zw7r]

Bosch 100%

[@miticosul]

Why should a measurement unit used by less than 2% of the world become a standard in tools? Even if it's dual, why?

[@VincheroKarpintero]

Easy, tiger. Relax. 😆

[@MrOner07]

lol... sayang means "love" or "such a waste" in malay and i said the exact word at that exact moment😅

[@funkysteveve]

That's exactly my reaction! Haha

[@carlhuffman6792]

A wiggly fence lol must be for making up the difference from metric to imperial ha ha

[@persibday.]

3:53 u speak bahasa

[@apolinartabanera9275]

Sir. Kakatakot review mo. Baka may magagalit n nman✌🏻😜

[@kevinhoffman9560]

Jo bro my compliment good explaning good work

[@tartorstyx5104]

Useless with that type of fence.